011225881 Black 77mm 12V BX Disc Horn Kit (Toyota)

I used it on my 2013 Scion TC and it is definitely worth it. A cheap $20 modification that will be useful when driving everyday is a deal. Sometimes with my stock horn I felt like people couldn’t hear me, with this its loud enough so they can hear me, but not loud to the point it will be obnoxious. I feel like it is a good mod, cheap and get a great outcome out of it, best of all it is plug and play and works better than the stock ones. I will be doing it on my other cars I ever get in the future.

Easy install on my ‘07 FJ cruiser with the Toyota plug. It comes with two horns but the OEM only has one plug, I ordered a Y splitter to connect both worms with no issues!

comes with two horns one low tone and one high tone. I used on a Prius C only has one horn as original equipment, so I used the high tone. Great increase in sound in contrast from the lousy original horn that came with the car.

Nice horns. They go beep beep. Easy to install.

A pair of these are lower cost than two OEM Toyota horns. These mount and connect to the harness same as OEM. Nothing is going to make any 4.3gen RAV4 horn install easier since you have to remove the entire front bumper. Make sure you have some spare clips and bolts ready for reassembly; those parts do not always age well. Loud enough and hopefully will last as long as the OEM horns did. Seems that the current draw from these will play nice with the OEM harness...no need for another control relay. Minor gripe of growing tired of everything made in china though.

These horns were identical to the genuine horns on my Scion Xb (Toyota) The plug fit perfectly and size and shape of horns were exactly the same as original...at a fraction of the cost from the Toyota dealership.

I changed the horns to my 2008 Lexus rx350. I wanted to try these instead of the old shell shaped OEMs. It was an easy install. Disconnect the positive terminal then unplug the horns. Unbolt it from the frame then install the new ones. Use a 10MM socket for the battery terminal and a 12MM socket for the horn bolt. Easy peasy.

Parts selector said this wouldn’t work with a 2021 Tacoma but it works 100% plug & play. Sounds similar to the stock horn but much louder. I tried the Hella Trumpet horns but those sounded like a clown car horn.

Thicker than original Toyota Denso horns but shouldn't be a problem for any vehicle since horns are not placed in places where there's no wiggle-room. Connectors fit perfectly, though appear to be on the opposite sides of the original horns. Toyota's original wiring becomes somewhat taut but still doesn't direly affect anything. Horns sound phenomenal. I didn't look close enough and just installed them. Usually the low frequency horn is attached at a lower level at the level of the bumper while the high frequency unit is placed next to the front grill. Not sure if reversing this arrangement will affect sound dissipation. I doubt it!!! Still the combined sound is amazing and hopefully it serves its purpose on the road. The horns are listed as corrosion and water-spray proof. If both these claims hold true I think this is the best purchase I ever made since original Denso horns were $ 130.00 each. So overall I saved $ 260.00 plus tax and installation fees. That's quite amazing considering these horns sound so good and claim to possess additional long-lasting qualities. Time will tell. Regardless, I am content.

Muy buenas aunque no suenan tan fuerte, las puse en una moto y no hubo gran cambio

Good product, no issues & simple bolt on

Good

Fit perfectly on my 2011 Highlander and sound great. At a fraction of what the OEM horns would have cost. Easy repair as well, plug and play.