Merax Storage Daybed with Trundle, Twin Size L-Shaped Platform Bed with Convertible Trundle, Two Drawers and Built-in Desk for Living Room, Bedroom, Guest Room, No Box Spring Needed (White)

Bed is nice and comfortable according to my sister who Is here from out of town. The only drawback is you have to put it together piece by piece so it takes quite awhile to put it together.

Needed something to double as a sitting area and a guest bed for single or couples. This fit the bill and at a decent price. Looks nice. Has a few issues though. The pieces had a few scratches, an exposed staple, and the finish was damaged in one area upon unboxing (see picture). Thankfully all of these are in areas where they really aren't seen once assembled. The listing didn't really say what size mattresses to use, so we bought it and crossed our fingers that the mattresses we already had would fit... They are 8" mattresses and you really have to lift the main bed frame off the ground to fit the pullout underneath with a mattress on it. The biggest issue we had is the pullout doesn't fit into the main bed frame correctly (see picture). The front main support is almost 1" too short for the pullout to fit correctly, which makes it stick out a few inches in front. It's not a big enough deal for us to disassemble, pack it all back up, and return, but it is frustrating that we just paid that much money for something that is flawed. We are trying to figure out a way to modify the frame so it works correctly.

What I like most about this product is that it can be assembled into a king bed when in use and a twin when not in use. This helps me use my space efficiently. I got the bed that hides the extra mattress under it (it looks like drawers but it's not). The mattress used are 4 inch depth, I could not find 5 inch ones that were at a reasonable price (6in would probably rub according to other reviews). The bed is not very tall (which didn't matter to me). The trundle that stores the extra mattress has freely rolling wheels (not on a track) which at times you have to carefully roll under for it to align perfectly under the bed. Which also make not be flush with the bed frame if you push too far inward. The bed does have many pieces to it but is easy to assemble and comes with directions that are pretty straight forward.

We bought this for our sons room since he has his cousin nap here often. And have had to use it twice already for a make shift guest room.The idea of the trundle is great, but unfortunately it just isn’t there conceptually. The whole thing is a nightmare to put together, although I knew that it would be that way for the price that it is. After putting it all together a twin mattress doesn’t actually fit on the top by itself. There is about 3-4 inch gap where the mattress doesn’t fill in. Then when pulled out to make it into a king, an added twin also doesn’t fit. You have to turn both mattress to fit correctly, which is just annoying. Then the bottom mattress has to be like 4 inches to fit Under the bed with our and kind of bedding other than a sheet.It’s hard because for the price and the idea that I could make it into a king bed plus a pull out twin is exactly what I want. But man it’s hard to wrap my mind around keeping it for all the cons* oh it’s also extremely sharp on all the edges. My kids have lotsss of scratches from it already, so just beware.I don’t think I would buy it again, but I also didn’t think the effort to dismantle it is worth returning it either. So here’s to just being aware!

It is definitely very practical to extend from a twin to a king size bed.Very practical for reduced spaces by keeping it in twin mode.Unfortunately, I must say that it has some against it; one of them [the most prominent and dangerous in my view] is that, being assembled in a twin form, it has a rather pronounced protruding edge, that is, the part that comes out to become a king, does not fully fit the bed and mattress in twin form it is not enough to cover that pronounced space. If the mattress is moved to cover the protruding edge, on the side that is backed there is a line hole the same length as the bed, and with children it is always dangerous for them to get stuck in those spaces.The assembly was somewhat cumbersome, even with the manual; Well, there are many parts to fit together.I don't know if it's a factory defect or something I did wrong in the assembly procedure so that it stays like this. But already looking at a photo that shows the seller in detail, you can see that same protuberance; that I did not notice before purchasing the item.I admit, the bed idea is great, but that protruding edge; I don't quite like it.Of course, this is all from my perspective.

I had to order mattresses that haven't arrived yet, so the bed hasn't been used but I can say it is PERFECT for my guest room/office. It's gorgeous and fits the small space perfectly! It took a few hours to assemble but I was able to do it alone. Looking forward to getting the mattresses and trying it out but so far I'd recommend.

I like cuz ot got the job done

Very difficult to assemble, doesn’t come with the mattress and there’s a fee for returning