goCoax MoCA 2.5 Adapter with 2.5GbE Ethernet Port | MA2500D Ethernet Over Coax for Gaming & 4K Streaming | 2.5Gbps, Plug and Play | for Homes with Coaxial Cable Wiring - Requires 2+ Adapters (White)

The best device for those who needs wired connection but don't want to run separate cable. Why I like it ? -Very easy to set-up, just plug in and go. -Connection quality is amazing. My home office is connected through one of these adapters and gets 980+ Mbps on a 1Gbps connection. Practically no loss for reliable work, streaming, and gaming. I have bought 4 such devices and ordered one more because I have 4 bedrooms. 4 years of working without a glitch! .

I have an Xfinity XB8 gateway with MoCA built-in so I only needed one unit for my use. If your setup doesn't have native MoCA you need to buy 2 and some splitters. Simple plug and play set up just make sure you have MoCA enabled in your network admin settings. Boosted download speeds for my Xbox One X from sub-30Mbs to over 600Mbs, I'm sure individual results will vary, but it solved the problem of running ethernet from my office to downstairs. And it definitely works better than Wifi extenders or powerline adapters. It still won't replace a direct hardwire job to your gateway, but gets the job done if that's not an option.

Check to see if your router/modem has built-in MoCA before ordering a 2-pack of these! If it does, you might only need 1! I ordered 2 at first, set them both up, and they weren’t working. Then, while troubleshooting, I uninstalled only my modem-side MoCA adapter, and suddenly my computer was getting flawless, fast ethernet connection. Turns out I only needed 1, because my modem/router has built in MoCA, which I wasn’t aware of at first. With all that being said, this product works great, and does its job as intended.

I have Verizon Fios and I had Wifi issues with the Verizon router each time it restarts so I bought my own router. I stopped using the Verizon router and plan to return it to avoid paying the monthly fee but the side effect is no TV Guide updates to the Verizon cable boxes. A Google Gemini search pointed me to this Moca adapter that turns allows data to pass between the router and the cable. I bought the single adapter since I only needed the Verizon cable boxes to work properly. I already had a PoE filter installed. Setup and install was very simple as all I had to do was connect the LAN wire to the router, the cable wire, and the power adapter. I did disconnect the cable wire and unplugged the power from the Verizon cable boxes. After completing the boot up sequence, both cable boxes got the TV Guide updates without any issue. They also have access to On Demand and that wasn't working previously. I know the included directions mentioned custom settings are available but I didn't need to go that far. This Moca adapter allows the Verizon cable boxes to work without the need for the Verizon Fios router. It is very sturdy and seems to be high quality. I know that I can use another Moca adapter somewhere else in the house to leverage the existing cable for data purposes but I don't think I will need to go down that path just yet. If you need to create a Moca data network, extend an existing Moca data network, or simply keep your Verizon Fios cable box experience without the Verizon router, I recommend considering this Moca adapter.

Plug and play. Works great! Thought I was going to have to run Ethernet through the house. This is an easier and cheaper route.

was working fine till i actually tried hooking it up to a trendnet 10gbe switch.. now i get slower speeds 400mb than if i hook it up to my 1gb switch.. other stuff like my asus router hooked up to the same switch gets 4-6gb.. it apparently does not work with a 10gb switch.. i can get the full > 2gb by running iperf3 with 10 streams but a single stream (which i need as a back channel to my downstairs router) is ACTUAL slower.. wth...

Worked perfectly as a replacement for a Verizon FIOS WiFi Extender for which the WiFi capability was not being used and was costing $12 per month. Disconnected the Coax Cable from the FIOS Router, disconnected the CAT5 cable from my 4-port switch, and connected those cables (and power) to the goCoax MoCA 2.5 adapter and I was fully operational in under two minutes! Ran multiple speed tests--same as the Verizon Extender. Checked multiple devices on my network. Everything worked perfectly. It will pay for itself in less than 6 months.

This was shipped by Amazon. I asked for the Ethernet cable package. They send the coax cable package. It was time sensitive. I used the adapter and bought my own ethernet cable. The adapter worked OK. Amazon gave me $15 credit.

Ich nutze den goCoax MoCA 2.5 Adapter zur Netzwerk-Erweiterung über bestehende Koaxialkabel im Haus – und ich bin positiv überrascht. Wer keine neuen Netzwerkkabel verlegen kann oder will, aber trotzdem hohe Netzwerkgeschwindigkeiten sucht, findet hier die perfekte Lösung. Was mich überzeugt hat: Volle Geschwindigkeit über Coax – Ich erreiche mit zwei Adaptern problemlos 2 Gbit/s brutto (real etwa 1,8 Gbit/s netto) – deutlich mehr als bei Powerline oder WLAN. Mein Coax-Kabel sind über 30 Jahre alt. Für Streaming, Gaming oder große Dateiübertragungen absolut zuverlässig und stabil. 2,5 GbE Ethernet-Port – Endlich ein MoCA-Adapter, der auch die volle Bandbreite weitergibt. In Kombination mit einem 2,5G-Switch oder NAS kann das Heimnetzwerk damit wirklich auf ein neues Level gehoben werden. Plug & Play – Adapter anschließen, einschalten, fertig. Die Geräte finden sich automatisch, keine komplizierte Konfiguration notwendig. Ideal auch für technisch weniger versierte. Nutzung vorhandener TV-Verkabelung – Ich verwende die vorhandene Koax-Verkabelung im Haus, ursprünglich nur für Kabelfernsehen, jetzt als Highspeed-Datenleitung. Perfekt für Häuser mit mehreren Etagen oder dicken Wänden. Stabiler Dauerbetrieb – Läuft bei mir seit Wochen im 24/7-Betrieb völlig unauffällig und ohne Hitzeprobleme oder Aussetzer. So muss das sein. Tipp: Wer Kabelfernsehen oder DVB-C parallel nutzen will, sollte auf ordentliche Splitter und ggf. einen MoCA-Filter am Hausanschluss achten – dann gibt’s auch keine Störungen. Fazit: Der goCoax MoCA 2.5 Adapter ist die ideale Lösung für alle, die echtes Gigabit-Netzwerk über vorhandene Coaxkabel wollen – schnell, stabil und ohne Kabelverlegeaufwand. Der 2,5G-Ethernet-Port macht ihn zukunftssicher und hebt ihn deutlich von anderen Adaptern ab. Klare Empfehlung von mir!

Top product! De oplossing voor mijn probleem met in de muur ingebouwde coax en toch overschakeling naar fiber zonder te kappen en te breken.

Works well, easy to setup. A bit expensive though.

Easy to upgrade and works like a charm.

Premetto che utilizzo i powerline da anni e non ero nemmeno a conoscenza della tecnologia MoCA fino a pochi giorni fa. Mi sono documentato brevemente online e ho deciso di provare con questi goCoax poiché, tramite i powerline, riuscivo a portare soltanto 100 Mbps in down/up al mio pc fisso (che non posso connettere direttamente al modem) pur avendo la fibra da 2,5 Gbps a casa. Nel mio caso è andata anche meglio di quanto pensassi, lo speed test mi restituisce circa 950 Mbps in down e up (a causa della mobo sul fisso che supporta LAN fino a 1 Gbps) con 7 di ping. Se rimane stabile così anche nei prossimi giorni, sostituisco definitivamente i powerline. La configurazione è molto semplice, vi servono ALMENO due goCoax, uno lo connettete tramite LAN al modem e tramite cavo coassiale a una porta coassiale, così da fornire la connessione internet al cavo nel muro; l’altro goCoax lo connettete tramite LAN al dispositivo che volete (nel mio caso pc) e tramite cavo coassiale a un’altra uscita coassiale. In teoria andrebbe anche messo un filtro per le interferenze, che ho acquistato ma non ancora installato, se ne avrò la necessità lo farò. Nella confezione del goCoax trovate sia un cavo lan sia uno coassiale, ma quest’ultimo è abbastanza corto e vi consiglio di comprarne uno a parte. In definitiva, se avete la possibilità e il giusto impianto di cavi coassiali a casa vostra, vi consiglio sicuramente di sostituire i powerline con i MoCA