WAGO 221 Lever Nuts 78pc Compact Splicing Wire Connector Assortment with Case. Includes 221-412, 221-413, 221-415

WAGO connectors are fast, easy to use and take up less room in a J box. They work great in tight situations and with short wire in a J box. No more sticking your fingers or pliers in a J box trying to twist on wire nuts.These are great for new construction or new wire runs where the strip wire end is straight. If you are installing them on solid conductors that were previously twisted together with wire nuts make sure the end is straight. It is recommended that you cut off the previously twisted end of the wire if you have enough and re-strip so you have a clean straight end for a tight secure connection. Do not use these on bent or previously twisted wires ends because you may not have a good connection.These take up less room in a J box and installation is very quick. Just strip the wires, slide on the connector and lock it on. Being that they are small and flat they are easy to position inside a J box. No more having to jam or move around wire nuts in a J box trying to get the outlet or switch to fit. They lay flat against the side or back of the J Box. If at all possible I will not use a wire nut again.

Wagos are the only way to go and infinitely better than wire nuts. There is no more guessing which wire nut to use and no referring to various charts when mixing differing gauges. It is easy to connect stranded to solid core, and you do not risk over tightening the wire nut. You can also fit more in a box as they take up less space, AND you can test for continuity (and visually see a good connection) even if all the spaces are taken up. It is also easy to reuse them and faster to add or remove wires in the future. I am happy to see Wagos whenever I open a box, because it makes the job a lot easier and faster. Ditch wire nuts—they have been replaced.

Besides receiving 78-piece WAGO Lever nuts at a great price, they are perfect for all your DYI electrical projects. These levers make new wiring and rewiring projects a breeze, easy to use and much safer them old type wire nuts. The lever nuts are well-made, secure and even have a guide to tell you how much wire to strip. So much faster than the old way.

These worked great. Easy to use and made good connections. I used on some LED lighting on a boat. Time will tell on how they hold up but initial install was quick and easy.

Decent kit with a variety.I was skeptical of using these however they come well reviewed online by electricians.They are much easier to use and change things up when you might get ahead of yourself with connections on large setups. I put all the neutrals together on a 5 banger and realized I needed to split them and they were easy to reorganize. Much cleaner than wire nuts especially when you have a lot of wires and never enough space (even when following box fill code).Easier and cheaper than buying the assortment separately it was a good value for a starter kit and appear to be genuine.

Made the job so easier,faster,neater,and so less frustrating loved them !!!

After a friend gave me a few of these Wago wire connectors to try in my handyman work, I couldn't believe the improvement over older types. Just being able to connect solid & stranded wire was worth the change. But they also eliminate one wire creeping up the other, they are undone and redone in an instant, there is no damage to wires when connected, there is clear vision of where the wires & insulation are at inside, and they are always snug! So fast and perfect. Wow! It's an incredible upgrade, and I leave my work with such confidence in the connections.

Much better than the products available in Lowes and homedepot. The stick strong to the wire after closing the terminal and they are easy to use as well. Wire doesnt alway have to but cut at the same length. Works on threaded and single thread wire.