FORIOUS Kitchen Faucets with Pull Down Sprayer, Chrome, High Arc Single Handle Classic Stainless Steel Sink Faucet Pull Out for Farmhouse Camper Laundry Rv Bar

This is a no frills type of faucet. Simple to install, sleek design and most importantly it does its job! Works just as well as the ones twice as much. Pressure is great and it looks like it will last for a long time.

We’ve been using this faucet for over six months and are very pleased with it. The build quality is solid, installation was straightforward, and it has the sleek look of a high-end brand—all at a much more affordable price.

I’m gonna give this faucet a five, although like some posters, the weight hits the cold water valve and prevents it from being pulled up. I’ll figure out something. It was easy to install, getting the old rusty one out was the bigger challenge. I like the design. I feel at least so far, It’s definitely worth the money.

I did a lot of shopping research, reading various product reviews, before choosing this faucet. The price was attractive, as well as the design and functionality.A few of the negative video reviews gave me a bit of pause, but since I'm on a budget, I thought I'd give it a go.After completing the installation process -- which was not "effortlessly" as the product description indicated... but hey, crawling inside a cramped kitchen sink cabinet space and disconnecting the old faucet, getting proper leverage on your tools and the connections, setting up your lights properly to be able to see, all while having old mineral deposits from the old leaky faucet falling in your eyes (HOT TIP: wear safety glasses or goggles!) -- suffice it to say that I gained some perspective on some of the reported problems with the faucet.#!: If the entire faucet assembly is loose, or becomes loose later on, it's because you didn't tighten the brass fixing nut under the sink properly. After my initial tightening, I thought "that should be good," but then thought "I'd better give it a bit more" because hey, it wasn't easy getting proper leverage while contorting my body in that cramped under-sink space. Sure enough, the fixing nut was not quite tight, so I gave it some more "ooomph" until I was sure it was good and snug. (ADVISORY: Don't over-tighten the fixing nut and strip the threads!)End result: the faucet assembly is mounted solidly.#2: One of the review videos (seems to no longer be here) complained of the extensible faucet head not retracting back into place properly. The video showed that, sure... but I'd wager that it's simply because they didn't position the counterweight properly. My faucet head retracts just fine, after a second adjustment of the counterweight's position.I won't bother describing exactly how it should be positioned, but most halfway competent people should be able to figure it out. If you can't figure it out, then you really probably should hire a real plumber to do the installation for you... which I imagine would apply in the majority of cases of problems with this faucet post-installation. If you don't install it properly, it's not likely to function properly, so don't blame the manufacturer.Overall, i'm quite happy with this faucet's design, functionality and build quality. Yes, it's a bit on the lightweight side and could be built a bit heavier/sturdier, but you're not going to find that without paying considerably more from one of the more high-end manufacturers -- probably $200 or more.It's only been installed for a couple of weeks, but so far, so good. Great value for a low price at this point.

Great value for the money very nice looking works great would recommend

After about 10 years I found that my existing Moen faucet was leaking from within t the faucet assembly somewhere (fittings were fine), so decided to just replace it.After some searching I settled on this unit, a lot are using identical designs so I'm assuming they're so coming from the same factory and I caught this one on sale.Build quality on it is good, I'd say 8/10, all metal but for the price and what you get, it's a great value. The included hot and cold lines are plenty long, all metal, and good quality. I loved the fact the water liner up to the head is hot swappable and the line has a mark where to place the weight to balance it. The hot swappable prob came in handy as after installing found the line was hitting my cold water shut off valve knob, but I was able to result disconnect it maneuver it around and reconnect with zero water leaks.The install is simple and easy, really just insert it into sink connect water lines, connect hot swap connection and adjust weight if needed. Took maybe 30 minutes to remove my old unit, clean up, and install this. I would recommend adding a bead of silicone around the base to both secure and prevent leaks. Personally I put down a bead of gorilla construction adhesive, let it sit overnight, then laid down silicone over that - both clear.(GE Supreme Kitchen/Bath is all I use now, great adhesion, waterproof, sets up quick, and isn't overly messy like some others). Feels very solid in place and love the performance, the pull down head is great vs the pull out head of my Moen -that just felt too bulky. Also feels like water pressure increased a bit, in both stream and spray. It switches smoothly between modes, with water running I can pull down the head with no issue - pause button works flawlessly and it's another awesome feature, comes in handy when washing stuff off in the sink - instead of turning off the water i can hit that, move an item and right back to rinsing. Lastly, the faucet looks great - I recently put all new cabinet and drawer handles in my kitchen (all oiled bronze color) - this matches them perfectly. Would absolutely recommend, great item for a great price - just know quality wise you aren't buying a Moen, but it does feel solid and carries a high end feel/look.

This faucet is awesome. Looks great works well and is so easy to install. I am a 78 year old man legally blind. The hardest part for me was giving the old faucet off. It was totally corroded putting the new one in took me about 20 minutes, putting your cold water lines And your spray nozzle hose to face plate through the sink and connecting them from underneath with a rubber washer, a steel washer and a metal screw on connector screw the two screws up in to the sink then Connect your cold water line to the cold water in your hot water line to the hot water. Make sure you spray hose clears all your pipes before you snap it in to fitting. then remove the two screws from the weight and attach it to your spray hose wait and attach it to your spray hose turn on your water and check for leaks and you are done. I highly recommend this faucet.