Isn't this snake oil?

Not necessarily. Under certain conditions with bass-heavy music/effects a cord of inadequate gauge can affect SQ. But this doesn't mean you need to spend a fortune--now that's snake oil. From a very useful and clear article on power cords in Audioholics: https://www.audioholics.com/audio-video-cables/power-cables "Let's say that we have a badly undersized power cord, and are playing bass-heavy music on a power amp. The bass draws down the filter capacitor, and the power supply draws current to try to replenish that charge; however, the more current the supply demands, the lower its impedance, and with an undersized power cord, this means that the supply voltage drops. If the voltage drop is strong enough, the filter capacitor will not fully charge up on the next cycle of high voltage, and this means a reduced supply voltage to the amplifier circuits. This phenomenon will occur in direct relationship to how much of this loud bass is being produced, and what does that mean? The bass note is now modulating the entire output of the amplifier which can in turn increase intermodulation distortion. "Now, this is an unusual scenario. There are any number of reasons why, in any particular system, it may not happen. The filter capacitor may be amply sized; the power cord may be of perfectly adequate gauge; the power supply may be delivering a slightly high voltage into a regulator anyhow and so the voltage fluctuations are stopped at the regulator. But if the factors are all right, it is indeed possible for a power cord to have a negative impact upon sound quality. "But what would fix this? The answer, of course, is simply that a power cord of adequately large gauge would fix it, if anything will. If that won't fix it, the problem is in the power supply design and no power cord, of any sort, is going to help. No exotic design, full of silver conductors, braided wires, shielding, Teflon, or what-have-you, is going to help resolve this sort of problem any better than any other cord of similar gauge because the one and only problem is that the resistance of the cord is too high."

will it work with 220v?

The plugs on this cable are not pinned for any form of 220 volt power. Perhaps the manufacturer has a 220 volt version. It might be worth your time to ask them.

Anyone power their computer (music source) with this power cord? i bought 3 (subwoofer, preamp, dac) and noticed a positive improvement right away.

I get the best effect using a HiFi Audiophile Power Cord with Red Copper or Gold prongs for my computers power supply, it improves the sound nicely and makes it wider and more realistic in nature compared to using an upgraded quality black 14awg power cord from tripp lite or someone. The sound is dramatically improved using HiFi Audiophile Power Cord in comparison to using a black 18awg power cord from any manufacturer.

Item Weight	0.55 Kilograms
Item Length	39.6 Inches
Case Material Type	Polyethylene Terephthalate
Color	Red
UL Listed	No
Gauge	10.0
Number of Outlets	1
Input Current	15 Amps
Plug Type	Type B
Connector Gender	Male
Voltage	125 Volts

WAudio Hi-End Hifi Audio AC Power Cable, US Plug - 3.3ft (1m)

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions