Rubber Bumpers Self Adhesive Large - 60 Pack - Clear Furniture Pads - 1 Inch Square Door Bumper Pads

I bought these to replace the ones on my wooden cutting board that kept falling off. The first thing that I noticed after applying them was that they really kept the board from slipping around on my smooth countertop much better than the original ones that came with the board. However, they are quite thin, so it is a bit of a challenge to lift the board up to clean the counter underneath. Inevitably, someone (not me) would attempt to slide the board to clean under it and the feet would stick so well to the counter that they came off of the porous cutting board. To be fair, the description of this item does not encourage using it on porous surfaces like wood - but several reviewers had said that they worked for theirs.. I cleaned the board thoroughly and tried another set (nice that there are 20 per pack and I only need 4), but within a few weeks, those came off, too. I had ordered some Loctite Super Glue for another item that I needed to glue, so - since it said that it was good for both wood and nonporous surfaces like rubber and plastic - and just 1 drop per square inch - perfect. I put one drop per square and have not had any more problems. I am re-ordering because my husband used the rest of the package for his new marble pizza board.

I have a plastic cutting board that I have had for a long time and little feet on it keep coming off. I have lost them all and replaced them with other feet over the years. Well those have started to come off, so I am giving these a try. They really seem to stick! They come with a little alcohol pad that you use to clean the surface. Then you apply the feet and it suggests that you don't disturb it for 24 hours to let the adhesive achieve it's strongest bond.I followed the directions and they seem to be on there tight! They are also nice and "sticky" in terms of not sliding around. They seem to be sort of a silicon material and they are very "grabby" on a countertop or table. Very pleased with this purchase.

Better than expected. Was looking for some grippy feet for a very smooth and slippery tablet stand that slides off angled surfaces.These little cubes are very sticky and grippy. For some reason they look very smooth and glassy in the packaging so I was surprised to find them to exceed expectations.They seem to have a very strong adhesive (just applied them today), but the one issue I foresee is that the transparent rubbery compound will be a dust and dirt magnet.However, should be easy to clean. We'll see.Just make sure you clean surfaces before application because dirt will show through and may be magnified.I did notice that most of the pads had tiny bubbles suspended in the transparent synthetic compound, which likely formed in the curing process. They are hard to see on the white backing, but they become visible once applied. I wouldn't try using these as DIY VR glasses, but for creating non skid surfaces and protecting your stuff? Excellent.Not a deal killer for my needs, but just an FYI. It's a really negligible thing IMHO, so I'll attach some pics for reference. Remember, these pads are only 1"x1" so from a reasonable distance I cannot see the bubbles.

The adhesive side of these bumpers was faintly tacky at best...really not much in the way of any adhesive. I followed the instructions and used the alcohol prep pad on the corners of a hardwood cutting board. They didn't adhere the slightest bit. Maybe I got a bad batch because the instructions were so adamant about NOT touching the adhesive side with fingers. I would not recommend these bumpers. Not worth the time or money wasted shipping them back.

I purchased these rubber pads to replace the original feet on my Fostex HPA-4 headphone amplifier/DAC. The original feet were really nice black pads (seen in the picture along the edges of the amp), however the amplifier slid around on my glass desk with the lightest touch. This was a pain whenever I plugged headphones into it as I had to do it two-handed. I purchased these clear ones in hope of keeping the amplifier stationary when i plugged headphones in and I am happy to say the amplifier is solid as a rock now! I cannot budge this thing and when i plug my Audeze LCD3's into the amplifier it is nice to be able to do it one-handed. I highly recommend these!

I bought this product to put on several cutting boards (not wood ones) to keep them from sliding all over the countertops. Once applied, the cutting boards no longer moved at all on the countertop. The bumpers are nice and soft/pliable, and are easy to peel off the sheet. I don't yet know how this product will hold up (continue sticking to the cutting boards) after repeated washings, but so far, it is exactly what I was hoping for, and exactly as represented. Well worth the money it cost!

I ordered these to put underneath my marble slab that I am using as a cutting board. I put one on each corner and 1 in the center and when I laid it down on the counter, it stuck to it like it was glue. I can still pick it up just fine but there is no sliding it around that is for shore. The little squares are very sick and very very sticky. I am very pleased with this purchase. Exactly what I needed.

They stayed on less than a week. These are more for the back of pictures. They might stick to paper but they will not work for a cutting board. Some actually feel off of the paper they are on and would not restock to it. I am looking now for a different style.

To much money for what you get.