KENUCO AB110 DS-1259ZJ Angled Ceiling Mount for Dome Camera (White)

Was looking for something to put my Eufy spotlight camera underneath my soffit, which is angled and this worked. Had to do a little adjustment with the screws, but this fit the camera perfect and is very sturdy. Now the camera is straight and can follow movement at all angles. Recommend!

I used this to mount a camera at an angle more to my liking. Good news is that there are very few (i.e. none) other wedge shaped boxes on the market, so this was welcome. Bad news is that its totally non-standard. There are 3 nicely brass-lined holes to attach the camera base. A standard box has 4. And two nice slots to screw the wedge box into the wall or ceiling. And screws were included! One screw wire entrance on the taller side of the wedge. I really needed it to come out the bottom. Nothing to center the camera mount onto the box. So I glued a couple of small vinyl pieces to act as a centering mechanism. Probably unnecessary. All in all, it worked. Some caulk, a little drilling and voila! And the alternative was ugly. Very hard to create my own wedge shape.....

I used this to mount a Ring Floodlight camera under an angled awning. It allowed me to have the camera view that I needed. I easily drilled new holes to match the Floodlight Cam mount bracket holes.This angled junction box can't be found in the local home improvement stores

I needed an angled j-box, but this box is made for a specific use. I'll have move and reposition the current box.

This product works great to give a better angle on your Hikvision cameras. I needed to lower my cameras a little in order to avoid seeing my gutters and these worked great. They fit my model perfectly, were easy to install, and look good too.

One of the problems installing outside dome cameras on a building eve, is making it level. This worked perfect.. The camera was tilted toward the building and could not see most of the yard. This leveled the camera perfectly and now I can see the entire property..

I needed to point a DS-2CD2142FWD-I a bit more upwards than the default adjustment allowed. This angled mount did the job, and it looks great. The mount connects fairly seamless, matching the color perfectly. The base is also big enough to contain the ethernet connector.The mount allows some rotation of the base before the screws are fully fastened which makes the install a lot easier.The only thing that would make this mount better would be a rubber gasket between the mount and the camera that can also cover the cable cutout at the side of the camera base. This would reduce the likelihood of bugs "taking residence" inside the base.

It was nice quality but we had to return it. It did not fit our needs. We were trying to use it for our floodlight ring.