Invision Dual PC Monitor Arm Bracket Ergonomic Height Adjustable (Gas Assisted) Full Motion Long Arm Desktop Clamp Mount for 24”-35” Screens Tilt & Swivel VESA 75mm & 100mm Weight 2kg to 15kg (MX900)

I’m seriously impressed. It’s currently holding my 34 inch ultra-wide OLED and a second 27 inch display and they are solid as rocks. No sagging, no slow drifting down over time, nothing. Once you position them where you want, they stay there. I was a bit nervous mounting the ultrawide because it’s not exactly lightweight, but the arm handles it no problem at all. Installation was easier than I thought too. The instructions were actually clear (which makes a change), and all the parts felt sturdy and well made. The adjustments are smooth but still tight enough to feel secure. My desk looks way cleaner now and having both screens floating makes such a difference. Honestly couldn’t be happier with it — strong, stable and does exactly what it says.

I used the clamp method of installation and found it a doddle on my own. It took me a few minutes to realise that you adjust the strength of the piston for supporting the monitor the opposite way to what looks intuitive, so definitely read the manual, but it's a great setup. The arms have excellent mobility, you can rotate the screens and the cable management is excellent. I'd probably prefer if there were caps/covers for fixings, just so you can hide the little allen key holes, but that's really not an issue, just a preference. The one piece of advice is to be cautious if you're fitting this to a desk that's right against the wall - because these arms (like all arms) will need some room behind the desk to articulate. You won't have a good time if your desk is flush against the wall, you'll end up having the monitors about 3 inches from your face. This is a really well made kit, sturdy and reassuringly strong. Very impressed.

Very happy with this bracket. Well built, sturdy, easy to adjust resistance. I'm able to move my 27" lcd and 32" oled monitors into virtually any position and orientation I want. The vertical tilt could be smoother but this is a minor issue for me.

I bought this for two 32" UHD Samsung monitors. Assembly took a little while but the instructions were clear and good quality Allen keys are included for all the Allen bolts. It can be fitted through-hole but also comes with the clamp that I'm using. All the components are very weighty and solidly made. The range of motion is excellent. The monitors can be at different distance & angles or can be stacked side-by-side or one on top of the other with ease and it can rotate either monitor to portrait, provided that the VESA mounting on the monitors is fairly central which sadly on my monitors is not the case, but that's Samsung's fault not Invision's. A nice touch is that there are two USB3-A connectors on the base with generously long flying leads that can plug into the PC or DisplayLink dock I'm using. The only slight issues are that setting the gas pistons weight adjustment is a bit fiddly. I also found setting the tension on the nut holding the pin of the screen tilt to prevent it slipping a little tricky but I suspect this is again due to Samsung's decision to place the VESA mounting right at the top of the back of the monitor, which means there is much more twisting force than there would be with a more central one.

Really nice product, super well packaged and very nicely built. Super impressed with the build quality. Sadly, I couldn't make use of it's features of two arms on one dual desk mount to get my monitors to touch in the middle. My desk is against a wall and the lower arms need to hang over the back of the desk or the upper arms come a little too far forward over the desk, which then makes the monitors too close. The Seller was super helpful all the way through and even suggested some other positioning, but my desk being against a wall was the problem. An easy solution though, I've returned this dual monitor arm stand to buy two single arms from the same seller so I can get my particular monitor set up. to work on my 2 metre wide desk. A perfect solution, and now the new set up which only took 10 minutes to install both is already in place and being used. A super product, well made and finished, easy to adjust and fit, with all the accessories and tools needed for fitting. They look great and hold my two 27" Mac monitors just fine. Superb Customer service, and speedy delivery. I'll certainly use this supplier again in the future. Thank you Invision. :)

I've been after some mounting arms for my monitors for a while and after waying up several options at various price points I opted for these as im thinking about upgrading to a 34inch monitor later and i think it's the best decision I made. Very easy to set up instructions were clear, i did have a 2nd pair of hands for slotting the monitors in place, the arms are sturdy and theres no drooping with my 27inch AOC monitor, and ive finally got my 24inch monitor in portrait mode (its the simple things). The main benefit for me of these are the increase in available desk space, when i need to use my pen display i can easily move my monitors out of the way and give myself the room to work. The cats are also enjoying the extra space as they now do laps around my desk while im trying to work. The only downside is i needed to pull my desk away from the wall so i can push the monitors back far enough, as im using the clamp solution at the moment. This may not be an issue as and when i decide to drill holes in my desk for the more permanent fitting.

I don't usually leave reviews, but compared to most monitor arms I've used (4+) this is my favourite. The mounting mechanism is SOLID, it's tricky to set up but it does support a wide variety of desk thicknesses. This is amazing - but does come with the tradeoff of slightly harder set up difficulty. It's worth it though because it's not that hard and you only do it a few times, maybe just once. The springs are nice, easy to tune. They require different sized Hex keys but all that comes in the box - nothing to worry about. The range of motion is fantastic. I am using a 32" and a 27" monitor and have insane flexibility of positioning. I can set one as a main, and then push it back and use the secondary as a primary, I can switch between portrait and landscape so quickly. Really good. My only slight criticism is that the cable tidy solution can fit - at best, four cables in it. I'd like it to be double the size (width/depth) but I've worked around it. 5/5 excellent performance at a great price point

Got the twin arm (up to 35inch monitor) and arrived in the box. One needs to assemble this unit. The base unit has 2 clamps (some only 1) which certainly helps if one has all round access to table etc. The arms are made out of Aluminium with plastic cable units which are good and tight, but can be removed for the cable transport. The VESA mounts are 75 and 100, so should fit my monitors. They are extremely well made, should last a long time. Only two gripes, first is the + and - marks for the tension of the arms and monitor, being black the same colour as the units, extremely difficult to see. Second is the instruction booklet for the assembly of the unit, a bit small, which means that the writing is even smaller, making it extremely difficult to read (even with my reading glasses on) they do supply via email a PDF copy which one can use to assemble the unit. Possibly include a direct link to the PDF would help. Would I buy this item again, YES I would. Would I recommend this to anyone, Yes I would even with the niggles, it seems to be a fantastic bit of equipment. Hope this helps.

Ottimo supporto, Utilizzato per un monitor 34" ultrawide ed uno da 24" (nel mio caso in verticale, ma può essere posizionato anch'esso in orizzontale) Un prodotto di ottima fattura e componenti ben fatti, prendendoli in mano si percepisce la robustezza del prodotto. Permette l'utilizzo sia tramite morsetti molto stabili dal il bordo della scrivania, sia "saldato" sul piano previo fori o attraverso il foro passa cavi (se la scrivania ne è provvista) Regge il peso del 34" in modo ottimale, mentre per il 24" (nel mio caso) va allentato al massimo perchè troppo leggero rispetto alla forza dei bracci davvero potenti Inoltre il doppio snodo permette di risparmiare parecchio spazio nella parte posteriore qualora la scrivania sia contro il muro Intelligenti i fori passacavi nei bracci per portare in modo ordinato e nascosto il cavo di alimentazione e DPI/HDMI al monitor e PC La confezione è dotata di tutte le viterie necessarie In sintesi il prodotto grazie all'effetto sospeso restituisce un aspetto ordinato e piacevole alla scrivania Acquisto consigliato

Easy assembly and set up, feels very sturdy, and does what it is supposed to. No complaints after 2 weeks in action. The set-up instructions are detailed and clear (thanks for the note of up to 22 revolutions to release the tension).

Stojak jest fantastyczny – solidny, premium i łatwy w montażu oraz regulacji. Jedyny minus, o którym warto wspomnieć: jeśli biurko stoi przy ścianie, pamiętajcie, że ramiona potrzebują dodatkowej przestrzeni, aby monitory mogły być ustawione obok siebie bez przerw. Mam 2x 27" monitory i z powodu biurka przy ścianie powstała między nimi spora luka. W takiej sytuacji sugeruję zakup 2 osobnych ramion.

Works exactly how it says it works. Guide is detailed and easy to understand. Balancing it is easier than I thought it would be.

Super support double écran ! Le bras Nvision est solide, stable et très pratique. Je l’utilise avec deux LG de 27 pouces et c’est parfait : réglages fluides, gain de place sur le bureau et un rendu esthétique vraiment propre. Franchement au top.