Tenda PoE Injector, 30W Gigabit Power Over Ethernet Plus Adapter, 48V PoE+ IEEE 802.3af/at Compliant, 10/100/1000Mbps RJ45, Up to 100M(325ft), Plug and Play, for IP Cameras & Access Points (PoE30G-AT)

I was dubious of this purchase, as I'm unfamiliar with this manufacturer, but I needed a cheap PoE injector to provide power to my Firewalla WAP. I've had 0 issues with this device. Super pleased!

Tenda PoE was easy to setup. Took it out of the package, connected cables, no issues. The brick is descent size and quality. Feels sturdy. Cords fit securely into ports. Provides power to my UniFi ACPro no issues. Power cable is long enough to place the unit far enough from power. Happy with the value and quality.

This PoE adapter worked for my purposes just fine. I've tried it with an 802.3af access point as well as a Ubiquiti controller. I've also tried it with an 802.3at device that draws 30W and it has worked just fine. the adapter gets warm but not hot, so it seems as safe as any other good quality adapter on the market.

What more can I say, hooked it up, POE discovered my camera, started working within 1 minute, most of the time the hand-shake can take over 5 minutes, this shows the quality of this product.

The Tenda Gigabit PoE Injector has proven to be a valuable addition to my network setup, and it certainly earns a solid 4-star rating for several reasons: Efficient Power Delivery: This PoE injector delivers a reliable 30W of power over Ethernet, making it suitable for a wide range of PoE-compatible devices, from IP cameras to access points. IEEE 802.3at/af Compatibility: It complies with IEEE 802.3at and 802.3af standards, ensuring that it can power a variety of PoE devices without compatibility issues. Simple Installation: Setting up the injector is straightforward. It requires minimal configuration and is ready to use with your existing network infrastructure. Sturdy Build: The injector is well-built and durable, designed to withstand regular use and provide long-lasting performance. Cost-Effective: It offers a cost-effective solution for adding PoE capability to your network, eliminating the need for additional power outlets or complex wiring. Flexible Placement: The compact and lightweight design allows for flexible placement, whether you need to mount it on a wall or place it on a shelf. Reliable Power Supply: It provides a consistent and reliable power supply to PoE devices, ensuring uninterrupted operation. LED Indicators: The LED indicators make it easy to monitor the power and status of the connected devices. In summary, the Tenda Gigabit PoE Injector is a 4-star PoE solution that efficiently delivers power to your network devices, simplifying the setup of PoE-compatible equipment. While it may lack some advanced features found in more expensive options, it excels at its primary function, providing a cost-effective and reliable solution for powering PoE devices.

I have a UniFi Touch phone that was moving to a room where there was no ethernet run back to the switch, so it has to connect using WiFi. This means I needed a PoE injector to power the phone. Was going to take some time to get the UniFi injector, so I thought I'd give this one a try and it works perfectly.

It's a great product. I didn't have a choice but to get it because Ubiquiti sold out of their own POE+ injectors for the Ubiquiti WAP Wifi6 LR. I used it for over a week and was pleased with the strong transmission speeds, despite long cables and the WAP being a floor away. A week later I decided to get the Ubiquiti U-POE-at (the original injector rated for the Wifi6 LR). To my surprise, my transmission speeds dropped in half, from 240+Mbps to just 100Mbps. Maybe Ubiquiti's injector only works for short POE distances (15ft??). But it just makes Tenda's product more outstanding. My biggest issue with Tenda is the lack of built-in wall-mount. Haven't figured out a solution yet.

Had enough reviews I had to try it! Reviews were not specific to my needs. Yes this worked great for my Unify 6LR. Very happy simple plug and play!

Everything included

It's a really good poe injector and it works perfectly with Cisco 3802I access point.

Cumple su función que es dar corriente a un cudy que lo tengo colocado en la planta alta como punto de acceso wifi

Works exactly as advertised. Nice to have IEC sokcket.

Powering a U6 Long Range without issue for a week so far.