FVRITO Performance VM22 26mm Carburetor Carb for Predator 212cc 196cc Coleman CT200U BT200X Mini Bike KT196 Go Kart GX160 GX200 6.5hp Clone Engine with 38mm Air Filter Intake Manifold Stage 1 Kit Red

Easy to install right out of the box without tuning and I have a heavily modified 212. Much better than stock better power better throttle response. Much easier to start. I will fine tune the air to fuel ratio, but at the moment it runs right out the box. Be aware of placement on engine.

The tuning was quite off an bit and the size is perfect the fit was great and was easy to install and the air filter was magnificent

I installed the FVRITO VM22 26mm Carburetor kit on my setup and initially, everything seemed fine, but unfortunately, it didn’t last long. By the next day, the carb was leaking, which was disappointing after taking the time to install it. I ended up returning the product due to the issue. To be fair, it’s possible I received a faulty unit, as these things can happen with parts like this. The kit itself looked complete and the concept is solid, but the durability in my case just wasn’t there. If you’re considering this, it might be worth checking everything closely after install or being prepared in case you need to exchange it. Overall, my experience wasn’t great due to the leak, but it may have just been a one-off defect.

Love the product, easy to install, increases power, only issue I have is the cool air intake broke super easy and I can't find a replacement for just that piece anywhere

Correct fit

The carb is good it increases torque and does what is needed, however the jet is far to small for my engine. I have a predator 212 hemi modified, I needed a 140 jet before I can even start tuning. If you buy this with a strong engine I would get some new jets for it rather than wasting time tuning it out of the box.

Picked this up for a 196 I swapped into my GMB100. The black looks so much better than the standard silver. Everything fit together as expected. Gaskets, manifold, hardware, etc. everything worked and fit as it should. I swapped out to a 100 jet before first use. The last VM22 I ran on this engine had it so I knew the engine would like it. After a few slow prime pulls gave it a rip and fired right up. Did a little tuning to set the idle where I wanted it but since then it’s been firing up first or second pull every time. For the money, it’s a decent value and a decent carb. Very little fuss in installing it and with tuning.

Good carburetor for my engine it runs great

It worked and worked well. Cheap filter cheap carb both you can buy for 20bucks so the carb adapter is priced very high. Quality of the adapter tho 9/10. And only reason why it’s not a 10 is becuase I believe everything has improvements nothing is perfect. 9/10 is the highest my scale goes. If you don’t mind paying for performance this is a good buy rather pricey but still a nice upgrade.

Good value works great

Used on a 212cc mini bike engine. Never achieved the results I wanted. Quality is not very good. Changed jets and although improved, it as not consistent.

I had to order a new gasket for an extra $10 as the one included was too big.