Authorized OEM Part SSM-16HR 6549W1S013A (6549W1S013K) Microwave Turntable Motor for LG Kenmore

Works great. I thought I'd have to buy a new microwave, but this was easy to install and it worked and it's still working!

The motor arrived quickly and was an exact replacement for my LG turntable motor. Everything lined up perfectly, mounting screws and wiring harness. The shaft design was slightly different but fit exactly. My one concern was that it did not seem to be exactly perpendicular to the body of the motor. Don't know if this is by design or a defect. I will report back when it has been running for a significant enough amount of time to speak to its longevity. Don't know whether this was a rebuilt motor or new as the listing does not specify. As others here have said this is an incredibly simple fix and quite expensive if done by a repair person. MAKE SURE TO UNPLUG YOUR MICROWAVE FIRST!Btw, if you have an LG microwave with an ExtendaVent, there are four screws on the outermost edge on each side underneath the microwave. These are the ONLY ones that need to be removed. DON"T remove the screws for the lights further in - unnecessary. Also, put a tall box on your stove to lower the ExtendaVent onto. Make sure it is within a few inches of the bottom of the ExtendaVent. You do not want to risk ripping out the wiring harness. You will have to pull the ExtendaVent out slightly towards you after the screws are removed. There is only one cable harness that is easily unclipped that you will have to remove to gain access to the motor. The cable ends are keyed so it is easily reconnected. Just tilt the left side of the ExtendaVent down while you unclip it. An extra set of hands is helpful for this maneuver but you can manage it yourself if need be. Then just lay the vent to the side and replace the motor. Easier than it sounds. Don't forget to plug the microwave back in after reassembly.

The turntable in my microwave gave out months ago. I had been toying with the idea of replacing the microwave or calling in a service technician, but then it occurred to me to check youtube for instructions on how to fix this. Once I saw the video and realized how easy it was to fix, I removed the screws to check the current turntable motor to be sure to order the right one, and then placed the order. Took all of 15 minutes or so to replace the motor, and it's like having a new microwave. The motor came quickly and works well!

Fits my Frigidaire product, easy to install, good quality.

This item works great. Replaced my old one with no problems. No noise and it fit great. Good purchase for the price.

I almost bought a new microwave because the turntable stopped working. Upon inspecting the microwave, we saw that there was a way to replace the part that was no longer working. We ordered this and the after a quick and easy install, the turntable is once again turning.

Worked for Samsung over-the-range/ovenModel: ME16K3000AAOver time the fat and sugars slide out that MicroRound hole and clog up the device. Let's hope this one will last long.Delivery was fine - check return policy - I will be KEEPING this one.Device installed easily by unscrewing bottom panel, Phillips’s Screws 6 or 7; under microwave - installed above oven/range. Save middle, front screw for last since panel drops down! Careful with light cord - take a pic or two.There was A LOT of grease up there!Make sure to unplug the microwave because getting the OLD ONE off is a bit difficult and make sure the contacts are cleared of all that grease.I’d recommend fuse switch OFF for entire range too - THAT’S 220 Volts! Unplug microwave from outlet that’s hidden in cabinet too.Thanks for helping us fix our microwave turntable!

Received clearly used motor with multiple visible oil spots on it