UrbanRed Flexible Bendable Ceiling Curtain Track, 22.9 ft (7 m), Mount for Rail with Curtain Tracks System, Room Divider, Curtains Rod, RV Ceiling Track for Curtains, Long Curved Hospital System White

Packaged neatly and completely inside a small, thin box, the flexible track comes very tightly coiled. It is a good idea to follow the easy-to-understand instructions provided. Uncoil the track and work with heat, gentle pressure and/or water to remove the tension in the product. We live in the U.S. southwest and mid-April is already in the 90 degree F temperature range. I unpackaged the product, applied water and gentle weight/pressure, and slowly, over two days, the tension came completely out. The resulting track was very easily installed in a straight line and then bent almost at a right angle to form an "L" shape (as shown). Final product is excellent, sturdy and performs exactly as designed and expected. As the instructions state, do not drill the screws into any studs or joists. Use the wall anchors provided. I had zero problems with any hardware and was able to use everything provided with complete success. The curtains shown are 132 inches long and the hardware has zero difficulty supporting their weight and rolling smoothly and with ease. I cut the length of the track using a simple hand-held hack saw. If I ever needed to hang curtains like these again, I would not hesitate to purchase this same product/kit - very easy to install and very good quality.

It is nice to have a different option to put up the curtains. It is much easier to open and close than the rod curtains.

I found the Urbanred product to be pretty decent quality for a good price for its intended use in my Tiny Tiger-70s-lite Lady Lounge. I have some mid century windows that I had installed some shelving and cat (tiny tiger) steps beneath, so I didn't want long shelves directly flush with the windows. Instead, I used the track to create a soft, sheer separation between the shelving, steps and window light and the rest of the lounge. Since the track is plastic, and slightly flexible, I was able to create a soft wave pattern by measuring the space between each peak and valley of the wave on the ceiling, mark it, and install a clip at each one so that the wave came out somewhat evenly. The wave added fun visual interest and mimics the waves in some other areas of the 70s influenced lounge. You can see some of the stages of installation and final product where I hung just 2 of the sheers on either end of the final track, just to create a division. I'll be adding more sheers to the entire track, soon, but the pictures give you an idea of the result. Since the windows face the forest, I didn't need privacy curtains for my use, but i think the hooks and track rollers are strong enough to hold something heavier than the light sheers I hung. Installation notes: I WAS able to do this myself, and I'm only 5'3. The ceiling I worked on has a slight slope, so it was definitely a somewhat difficult project, overall, because the track has to be put up all at once, and manuevering by yourself isn't super easy. Things that make it more manageable: 1. Put it under some heavy stuff for a few days to try to straighten it as much as possible but not flatten or scar the grooves on it. It's ok if it doesn't come out completely straight afterwards, but you do want it to be mostly straight, and not coiled up when you install it. I would recommend putting it under some moderately heavy furniture that no one is sitting on for at least 3 days. If it's coiled up when you go to put it up, I don't think the clips alone will be able to straighten it out. You need to train it before the installation. Some people use warm water to do that - I used some medium weight furniture and stretched it across the floor, repositioning the furniture legs on different curved areas every day. 2. I definitely recommend using the quality clear plastic butterfly toggle anchors! That made a huge a difference in installation and security of the track in the ceiling! 3. Get good screws - I wouldn't use the ones it came with, I'd use good screws meant for the butterfly toggles anchors. I used a combination of small and medium ones; small toggles definitely fit and work, but I used medium toggles every 4th hole because they are heavier-duty, meatier, and can sustain a heavier load, just to give the overall track strength. I used only the heavy duty ones at the ends and center, as well, which might have been overkill, but I wanted more assurance that the clips will hold and not yank out of the ceiling. 4. Definitely mark all of your holes where you need clips installed in the ceiling ahead of time for drilling, then pre-drill holes to correctly fit each butterfly toggle anchor so that it's not loose in the ceiling. Use a rubber mallet to gently put your butterfly anchors into the holes. Once you have your anchors in, the process goes more smoothly. I don't know if the anchors it comes with would be reliable since there's nothing hardcore to prevent them from popping out of a ceiling application when weight is put on the track. I didn't even risk it. Next install your clips by using the screws that fit the butterfly anchors to secure the clips into the anchors. It's tedious, but not too bad. 4. It is possible to cut the track to the size you need, it's just a pain. The end caps will cover the cut if your saw job isn't perfect. You can put the end caps on now or after the track is installed 5. If your clips are secure in your anchors, it's a matter of slipping the track into each. This is the hardest part though. It would definitely be so much easier to get the entire track into the clips with another person, or even 3 people! 6. Getting the track into the clips isn't an easy task, but it's possible even if you're doing it alone like I did! If you're by yourself, the key is having something to rest the track on that's up high near the ceiling, like a tall ladder or something on the other end, while you get your other end into the clips. Once you get one end into the clips, you can go put the other far end into the clips on that side, so that the track is not hanging anymore. (It's very hard to manage and get into the clips when the track is hanging down on one side) It's possible to kind of move and adjust it into just the right place once you get both far ends up though! I had to stand on the ladder and take it out of the clips and readjust it several times since I did a wave formation with it, but I think if it's installed in a straight line, it's much much easier to install. You do want it tight and not loose, and when you take it out of the clips, sometimes the plastic track gets scarred. It's definitely a P.I.T.A. project which took me multiple days to complete, but once it was done, it functioned great for me, and I haven't had a problem with the wheels on the roller pieces. I think it suits the application I needed it for perfectly, and it doesn't look unsightly at the ceiling level in my setting. Goodluck!

Flattening the track took time. I left it strung out across my apartment with heavy items on each end for a couple of days, then read the instructions, which said to use a hair dryer to heat it and gently work it straight. I did that for a couple of feet and got impatient tbh (my length of track is about 11 feet long), so I carefully forced it in the opposite direction from its existing bend without heat and it straightened out enough for me to be happy with it. It still had a curve to it, but I installed the ceiling mount brackets 10.5 inches apart so they hold it straight enough for me to be happy. The curtains hid the imperfections in my case anyway. The people complaining about the end caps not fitting are wrong. I agree with the photos they posted in their reviews. The track does have little outward protrusions on the top and bottom, whereas the caps only have space for that protrusion on the "top". You can still put the end caps on. No rubber band fix needed. It took some patience to get them started (at which point I was worried those reviews were right), but once the cap got started, it slid on tightly (which is the whole point). Learn from my mistake when measuring the spacing of the ceiling mount brackets: the end caps take up space on the track. Make sure the brackets on the ends are about 1.5 inches inside of where you expect the track to end. The track is lightweight and seems to hold the weight of the curtains well with the ceiling bracket spacing I chose. My curtain panels are 9 feet tall by 100" wide, and I have 2 panels, so they have some weight to them (still well under the 33 lbs limit of the track though). I purchased the black track. It's shiny black plastic. Nothing unexpected there. I feel like white plastic sometimes looks cheap, which is why I went black even though my walls are white. It blends in fine with my dark colored curtains. A gotcha I ran into is my curtain panels had a rod pocket and back tab loops, neither of which are compatible with this track. I purchased something called curtain pin hooks (after consulting ChatGPT) and although it took time to measure them on the curtain so they were evenly spaced, they were exactly what I needed. In fact, the pin hooks raised the curtains a bit higher which hid the track a little bit. Super happy with that. This review is written the evening I finished hanging everything up. I have no idea how these will hold up long term. At this point, I highly recommend them though. I used this product to make a curtain wall in my bedroom in front of my window, and will attach a before and after pic of it. My window trim sticks an inch out, and I mounted the ceiling brackets about 4 inches from the wall so the curtains have space to bunch up. Don't look too closely at the ends in my after picture or you'll see I haven't yet fixed the end mounting brackets lol It looks fancy and I spent just under $115 in total with this track and the 2 curtain panels. Couldn't be happier with the outcome!

Satisfactory

ハイエースのフロント部分に設置。

It was a lot easier to install that I expected and the result is perfect. I used them to created a division in my garage. We created two wall and it work good even with the round corner we did.

Super. Après un an d'utilisation. Toujours content

Excelente producto y muy accesible