GumBuster Carburetor Cleaner + Purge Valve Kit

I cannot say enough good things about the CleanCarburetor GumBuster Carburetor Cleaner + Purge Valve Kit! I was facing a major snowstorm and my Toro snow blower suddenly stopped working. With the snow piling up and no way to clear my driveway, I needed a quick solution. After some research, I decided to give this product a try, and it saved me during the blizzard! Here’s why I’m so impressed: ✅ Easy to Use: The kit came with clear instructions and was simple to apply. The Carburetor Cleaner worked quickly, and I was able to clean out the gunk and debris from the carburetor without any hassle. ✅ Restored Performance: After using the cleaner, my snow blower was running like new again! The engine started up smoothly, and I was able to get back to clearing the snow without delay. The Purge Valve Kit was a perfect addition, ensuring the fuel flow was restored to its full potential. ✅ Perfect for Small Engine Maintenance: This kit is a game-changer for anyone with small engines, especially snow blowers, lawnmowers, or other outdoor equipment. It’s great for preventing carburetor buildup and maintaining your equipment’s performance, especially after long periods of inactivity or during harsh weather conditions. ✅ Quick Results: The Cleaner worked within minutes, and I could immediately feel the difference when I restarted the snow blower. It was like it had a second wind! ✅ Value for Money: This product is a great value—it worked better than expected, and it was definitely cheaper and quicker than taking the snow blower to a repair shop. It saved me both time and money. ✅ Durable and High-Quality: The product is made of high-quality materials that are built to last. I feel confident that this cleaner and purge valve kit will keep my snow blower in top condition for many more winters. In short, the CleanCarburetor GumBuster Carburetor Cleaner + Purge Valve Kit is a must-have for anyone with a snow blower or small engine equipment. It’s effective, easy to use, and delivered excellent results when I needed it the most. I highly recommend it to anyone who wants to keep their machines running smoothly and avoid costly repairs! This product definitely saved my winter!

Second time that I have used this product within the last five years. Both times it has worked flawlessly. I have a Toro manual/electric start wouldn't turn over at all after winter storage even through I drained the gas before putting it away for the winter. First snowfall it didn't even sound like it wanted to turn over. Drained the fresh gas I had just put in. Already had the purge valve installed from the last time I used this product. Attached the hose from the can, sprayed some product in, waited till some spilled out(as directed) then let it sit for 20 minutes (as per instructions). After 20 minutes one more shot of product pulled the manual start 2x started right up. It is a little expensive but a lot less than bringing it to a repair shop. Highly recommend !

it didn't work for me. I repeated the directions three times draining the gas in the tank and in the bulb that holds the gas where the float is located. My Toro snow blower still would not start

CleanCarburetor seems to work pretty well, as long as the main jet in your carbeurator isn't totally clogged. If it is, this probably won't do much. I'd strongly recommend getting a set of needles to clean the carb jet first. Generally, my order of operations when trying to clean a carb is: 1. Drain the fuel completely from the fuel tank. 2. Drain any excess fuel from the carb's fuel bowl using the small screw on the bottom. 3. Flutter the fuel float to try and unclog the fuel jet. Remove the float if necessary and clean it using Seafoam or a cleaner or similar. Wipe down everything you've removed. 4. Install the CleanCarb purge valve into the fuel bowl. 5. Use a cleaning needle to clean both the fuel jet (the hole that the fuel bowl plugs and unplugs) and the main jet (the hole that the screw that attaches the fuel bowl screws into). 6. Reassemble, and then use CleanCarburetor to clean any remaining cruft out of the main jet. 7. Run the engine with a generous helping of Seafoam or Stabil Fast Fix and new fuel. 8. Treat all of your fuel from now on with either Seafoam or Stabil 360, and run your engines once a month or more frequently to ensure nothing dries out in the jets. Do all of that and you can get away with just running your summer tools once a month in the winter and your winter tools once a month in the summer for about 30 minutes. Nothing dries out, nothing gums up, everything works when you need it to work.

Good work for my Toro snow blower

I always run the gas out for summer. I tried to start for winter. No luck. I used electric start forever and a putter at most. I was planning to spend a lot for service. I came across this. It was delivered in less than half the time it said. Easy to hook up. After letting it sit for the 10 minutes it started instantly. It ran well! I will plan to use the summer blowout of this also.

Works great, just a described. Simple utilization, and save hundreds of dollars. Would definitely recommend!

Wow.. This is awesome!!. I used it for my Toro snow blower. I suggest you try this first, before you commit to tearing apart your 'not starting' snow blower to get to the curburetor for 'clean up' or replacement. I followed the instructions on the can, first time ( waited 20 minutes ), it did not work. I figured my machine was so 'gummed up', it needed more time to 'soak'. Afterward, second try, I waited like 2 hours after I sprayed the liquid in. AND FINALLY, it worked!!! I am very happy.. I suggest watch a couple YouTube videos first since my snow blower has two screws under the carburator. Make sure you unscrew the right one.