Buy Wall Control Pegboard

I would line my whole garage with these if I had the spare money. Super sturdy. Holds weed eaters. Pick ax. All of that with ease. Holes are stud spaced. so you really just need to find one stud. Put a level on it. Mark holes and repeat. Easy process. Use what comes.

I have these all over the walls of my home office - I am a Computer consultant, and tend to have every cable and adapter under the sun in triplicate at least, so these pegboards are amazingly versatile for hanging cables, storing hard drives, and even mounting a USB hubs and surge protectors using black cable ties to charge tablets, phones, and power hard drives stacked on the shelves. A few things to keep in mind when using these: -Standard Pegboard hooks and baskets work just fine in the round holes, you don't necessarily need to purchase the more expensive Wall Control kits - you can save a LOT of $$ if you just want to use hooks or baskets -However, the Wall Control Shelves are extremely sturdy and can hold lots of weight, only if -You use the slat-mounted Wall Control Shelves and hooks and.... -The Pegboards are properly mounted Which brings me to my main gripe with these - unless your studs are perfectly placed, you'll have to mount these to your walls using either drywall or masonry anchors and that's a bad idea - because any advantage in weight they can support will be negated by anchoring them in something other than a stud - they will pull off if you want to hang heavy tools. So my solution was to purchase some boards, cut them to site, spray paint them black, then attach them to the studs then screw the pegboard into those. I also put some black plastic sheeting behind the boards so the white walls woudn't show through the slats in the Pegboard and it looks perfect. One Pegboard is holding about 80 pounds of stuff with ease. It took me a few weeks to mount all of these - I was careful to center and level them so they didn't look bad. It's a great way to organize your things yet keep them in sight. Out of sight, out of mind they say.

NOTE: Packaging and/or shipping could be better, but it wasn't worth returning for a slightly out of square soft bend in the sheet metal that I could readily fix. It came with mounting hardware options, which I did not use for my install but seemed like very good quality. I also feel like washers might be a smart thing to use (for extra security) as there is some wiggle room for lateral adjustments, but large-headed screws will suffice. There's a limit to the types and sizes of hardware that can be used because there is a very narrow slot to access the frame area to tighten down the fastener. I had planned on installing with lag bolts, but my socket size was not going to fit into the access slot. This design is meant to be used with a narrow drill /driver. These are very nice looking and a sturdy, heavy sheet metal gauge. Not too matte, not too glossy and very durable paint finish. I love the options of using standard peg hook accessories or slot wall style organizers as my storage needs evolve. I will never consider using MDF or standard pegboard sheet products ever again. Will this eventually rust if exposed to humidity out in a shed? Who cares, I'll repaint it. I expect this to last for years and years without warping, deteriorating or having the holes stripped out over time and due to weight of stored items. This was actually less expensive to buy and install compared to materially inferior products IMveryHO. No extra framing or spacers required. This was also incredibly easy to install by myself with minimal tools. When I need more I will buy this product again.

I just recently moved into a new house (actually 40 years old, but new for me) and needed to re-organize the garage, as the wife did the rest of the house! Their was already some old (looked like particle board) pegboard on the walls, but some of the holes had widened or snapped off. I have lots of heavy tools/garden equipment and did not trust the original pegboard to stand the test of time. I purchased 6 units (3 kits) of this Galvanized Steel Pegboard and could not be more happy with the results. If your garage studs are exposed like mine, then installation is easy as can be. One board at a time, simply line it up where you want it, leave 1/2 the stud for the next board, mark the holes, drill the pilots, put the board back, drill the provided screws (large & heavy duty) and move onto the next one. I have 4 boards lined next to each other on one wall and 2 on wall to the right, making a 64"x32" space, which was perfect for the workbench that I have under it. The workbench that I ended up going with was the "2x4basics 90164 Workbench and Shelving Storage System" and it all worked great together! I have 5 power drills, a circ saw, sawzall and three baskets with screws/nuts/bolts, etc on just one board. I bought the "Stanley Tools 819841 51 Piece Pegboard Hook Assortment", which has been OK. If any of you find great pegboard accessory hook sets, please comment on this post and let me know where to get them. The "Lehigh Group/Crawford #SHDH Super Power Drill Holder - 10 LBS" has been great for power drills. This pegboard looks great, is extremely sturdy, easy to install. The only difficult part in installation was if you wanted to use both pegboards with one accessory hanger. It says to use a penny and it works, but only OK. I just sort of eye-balled it and use each board separately.

I had been looking for a way to get more square footage of display area out of a typical craft show or street fair 10' x 10' booth. There were lots of options available online for making various displays using wooden pegboard, but from past projects I know that it is heavy and fairly brittle -- the corners break off easily. When I saw this, I thought I'd give it a try and ordered three sets of these panels. I had originally planned to hinge the pieces with piano hinge to stand them up on the tables in a sort of zig zag method, but I realized that for temporary displays I could just use zipties instead in the pre-drilled holes, and then cut the ties at the end of the day when disassembling and packing up. Much easier and cheaper, and allows more versatility in setting up different configurations. The one downside of these is that the sheet metal is thin, and standard pegboard hooks which are made for thicker wooden pegboard don't "lock in" against the metal. For a permanent installation, it would be frustrating as the pegs fall out with the slightest touch. For my temporary purpose, I found a piece of Gorilla tape on the backside of the panels over the hook area kept them solidly in place so my merchandise didn't get knocked to the ground if the pegs came loose. At the end of the day, pull off the tape and remove the hooks for transport and storage until the next show. This looks stylish and professional in my booth, is easy to store, and allows for a variety of display options. Good stuff!

I decided to give this product a try when we moved to our new house after using the traditional pegboard for years. I've now been using if for about 20 months and it's held up very well. I love the many hook and color options to really make it your own. Two things I'd go back an tell my past self if I could: 1. Just bite the bullet and replace all your crappy 1/4" traditional pegboard hooks with the ones from Wall Control from day one-- you're going to eventually want to replace them all anyway. 2. Get the "optional" o-rings! While the slotted hooks are generally a lot better at the hook not coming away with the tool when you grab it than the traditional kind, the ones that attach via just one slot sometimes still do. You can adjust their tension by bending the tabs per the instructions but I'm never a fan of trying to bend painted metal. The o-rings eliminate this problem entirely and make all hooks stay on rock solid. Ironically, at the time of this writing the ones from Wall Control are the one product of theirs NOT on Amazon but if you search for "O-Rings, Nitrile Rubber O-Rings 7/16" ID, 5/8" OD, 3/32" Width" you can get a 100 pack for $6 that will do the trick just fine. Kicking myself I didn't add these 20 months ago! I'd go so far as to say Wall Control should just include these with every hook set you buy, but I guess maybe they didn't want to muddy the waters as these fall outside their warranty as they can wear out over time.

I recently purchased the Metal Pegboard to organize my tools and streamline my workspace. The quality of the pegboard is excellent – it's sturdy, durable, and provides a secure place to hang a variety of tools. The sleek metal design also adds a modern touch to my garage. However, I encountered a significant issue during installation. The pegboard is not 16 inches in width, which made it challenging to fit properly in my space. Most studs in walls are spaced 16 inches apart, so having a pegboard of this width would have made the installation process much simpler and more straightforward. Despite its impressive build and functionality, the current size limitation hampers its convenience. I really wish they offered a 16-inch version to align with standard stud spacing. This small change would make it much easier to install at home and would greatly enhance its usability. Overall, the Metal Pegboard is a high-quality product that excels in organization and durability. If a 16-inch version were available, it would be the perfect solution for any workspace.

The organization I crave. These things are great quality. The first pegboard wall piece from one order was bent upon arrival but Amazon replaced it quickly. Purchased separate 1/4th in. pegs that worked just fine as well. Three panels fit nearly 300 hot wheels just fine! Anchors are strong and six points hold the panel into the wall. I used a mix of anchors and studs when mounting these with a slight space between each panel. Very sturdy, though I’ll probably aim for the stud on the larger wall unit and align the panels better. I’ve ordered the garage wall kit as well, just waiting on delivery. Will definitely be ordering more as I have a few other areas in mind that need a little bit of extra wall organization.

Die Qualität ist recht gut aber im Nachhinein hätte ich eher günstigere Produkte von deutschen Firmen nehmen sollen. Es war eine Empfehlung von amerikanischen Kraftsportlern, die damit ihre diversen Griffe und Zubhörteile verräumen. Dafür ist es sehr gut geeignet aber kein Schnäppchen.

Había pensado instalar un pegboard de madera pero me encontré con esta marca en Amazon, llego bien empaquetada junto a los accesorios que le pedí de la misma marca y tambien de otras marcas para pegboard universal, muy sencillo de instalar, son 2 paneles y ya trae tornillos y taquetes, cada quien puede darle un uso diferente, eso es lo que me gusto de estos paneles, volveré a comprar para la cocina o garage.

made of good quality material but slightly damaged in transit

Good quality, well made in the US, rather than cheaper products made in China

I love these and various wall control accessories. I use them in my kitchen to hang my pots and pans asn utensils as I struggle to access lower cabinets due to mobility issues. These have allowed mw to keep somw independence.