🎶 Amplify Your Drive with Rockford Fosgate!
The Rockford Fosgate Prime 1-Channel Amplifier R250X1 is a powerful Class AB amplifier designed to deliver exceptional sound quality. With a robust output of 250 watts at 2 ohms and a lowpass filter set at 50Hz, this amplifier is perfect for those who crave deep bass. Its compact design and lightweight build make it an ideal choice for any audio enthusiast looking to enhance their sound system.
| Manufacturer | Rockford Fosgate |
| Brand | Rockford Fosgate |
| Product Dimensions | 36.83 x 26.16 x 10.92 cm; 2.27 kg |
| Batteries | 1 12V batteries required. |
| Item model number | R250X1 |
| Manufacturer Part Number | R250X1 |
| Safety Rating | CE |
| Voltage | 12 Volts |
| Wattage | 250 watts |
| Item Weight | 2.27 Kilograms |
B**T
Great BOOM for the Buck
Perfect for making my factory Pioneer 10" sub go BOOM! RMS rated higher than advertised. Mine came in at 308 RMS which is perfect for the 10 @ 2ohmThe remote Bass boost is very handy as well, sometimes you don't want that much bass right?....
M**.
It's better than my crappy old kicker.
Works great, birthed at 310 watts, runs cool, good sound.
A**R
Not bad, but not the best
Good amp for the price point. But seem to have issues with over heating when cranking for long periods (hours). I have mounted behind seat in F150. I had over heating issues with another amp as well. Both at around same price point. So not sure if its because of the mounting location (seems it could be), or I just need to spend a bit more on a higher quality amp.
F**C
Solid Amp
I hooked up this amp to a single 12 inch RF subwoofer in a vented box. It sound solid and I enjoy the remote volume for the amp which gives me great flexibility with a variety of music. Great buy!
D**T
R250X1 is under rated!
I received my amp and the first thing I saw in the box was an official "birth certificate" from Rockford Fosgate that said that the actual RMS output of my amp was 308 Watts. As expected it seems that RF under rates their amps. I was glad to see this as I paired the amp with the Rockford Fosgate Prime R1L-2X10 Double R1 10-Inch Preloaded Enclosure which is rated for 300 watts RMS. This amp is quite small too. About 11x9x2 inches. One thing I want to say is that my original plan to wire up the amp with the high level speaker inputs was not going to happen. Basically I wasn't able to output more than 1 or 2 volts to the subs from the amp while attempting to use the high level inputs. (I used a DMM to set the gain and playing 57hz @0dB at 75% volume on the stock head unit (22) which meant that the output voltage should have been at around 24V to prevent clipping) Unfortunately I wasn't even able to get 2 volts from the high level inputs so basically I had no choice but to use the LOC for my install. As far as the amp performs it's great. It hardly even gets warm. I am pretty pleased overall with how well the amp plays and the fact that it includes the remote bass control knob. But make sure you use an LOC. And just as a tip the settings I use are-Punch EQ: Min-Freq: between 60-80hz-Gain: This will depend on your individual setup, use a DMM! Take the actual RMS power and multiply it by the ohms of your sub. Then find the square root of that number. That is the target voltage output you will be looking for (AC). So then you want to play a tone at 50 to 60hz @0dB at 75% of your headunit volume and with the sub disconnected slowly raise the gain until you are just under the target voltage and you will be safe. Rockford Fosgate Prime R1L-2X10 Double R1 10-Inch Preloaded Enclosure
Trustpilot
1 month ago
1 week ago
