XS Scuba Miflex High Pressure Carbon HD Hoses

Works great, light weight and low profile

Exactly what I expected and needed. It works great to attach my transmitter to for my computer.

I needed this for My Shearwater Teric's AI unit. I just don't like the idea of it the AI sticking directly off the side of the first stage. It could be used by a dive helper as a handle or the AI could just break off if the tank drops over. This hose provides a proper solution. I am aware that putting in an extra hose is always adding in an extra failure point, so if your going to do it put in the best hose you can buy. That is why I chose MiFlex brand, it's painfully expensive but it's the best. Just make sure you pick up a "High Pressure Swivel Spool" adapter. If you don't have that the air will be leaking out around the AI unit. BTW pick up two as it's good to have a spare spool in your O-Ring box.

I’m an idiot and ordered several of these that all leaked and I assumed it was the hose and not my transmitter. I’ve always had my wireless transmitter attached to my first stage, but the first stage on my wife’s regulator does not have room for the transmitter and requires a hose. I did not know that swivel hoses require another part to be placed in the transmitter before securing to a hose with swivel attachment. These hoses work flawlessly with that attachment in place.

I purchased two of these hoses one for me and one for my wife. The purpose was to connect a wireless tank transmitter and to move them off my first stage regulator. We were doing a liveaboard SCUBA trip in Belize. Both hoses started leaking badly after 3 dives. The leaks were coming from the sliding coupling. They were not tiny bubble leaks either.....we had to abort two dives the leaks were so bad. Also the leaks were coming from the exact same place on both hoses....that shows me there is a design and/or manufacturing flaw. Save your money and more importantly protect yourself. These hoses are just dangerous. I could see how they could really cause a problem with your SCUBA diving. Lucky for us the leaks were detected at shallow depths. Down deep and a diver could be in serious trouble with these hoses blowing apart.

I haven't installed the hose yet and I'm really looking forward to using it. I gave 4 stars because I ordered 32", the hose packaging states 32", but actual length end-to-end is 31" (not including about 1/4" to screw into the stage). Guess they round up. Not a big deal for me as I accounted for some play but something you may need to keep in mind when ordering.

Purchased this for improved location of an older AI transmitter that has some connectivity issues if screwed directly to a high pressure port on the first stage. Ended up purchasing newer transmitters, but still intend to use this with secondary tanks.

Used these to coil and attach my SPG to my 1st stage and "un-lollipop" the gauges and make it more streamline on my Mares Horizon setup. They work like a charm and I feel more comfortable with the flexibility of these than the hoses that my unit was shipped with.

Swapped out rubber high pressure hose for this. It is a little shorter than 32 inches. Pressurized the hose and it works.