SABRENT Tool-Free NVMe & SATA M.2 SSD Enclosure, USB 3.2 Type-C (EC-SNVE)

Simple, easy, well built! I needed a way to access the files on an SSD from my laptop and came across this unit in my search. I am impressed by the quality and durability of the device. It is made from extruded aluminum so it will give me years of service and it is a fantastic heat sink and protection for the SSD inside.Setting it up could not have been any easier. Just insert the SSD into the slot (it accepts three different lengths of SSD), close the cover and plug in the supplied USB cable. I did use a USB-C to USB-A adapter that I had handy.The device is compatible with my Windows 11 PC and it showed up immediately once I plugged in the USB cable. A discrete blue LED indicator confirms connection, power and data transfer, which is handy. Even though I connected it to a USB-A port, data transfer speeds were still excellent. Connecting it to USB-C would have made it even faster!The SSD that I'm working with is a 512GB device but the enclosure can support a variety of different storage capacity SSD devices. That will make this a versatile device that I will use for both troubleshooting & repair work as well as for external storage.

I am genuinely impressed with this SSD enclosure. The first thing that stood out to me was the sleek aluminum cover design; it not only looks premium, but it also gives me confidence that it dissipates heat really well during use.Most importantly, it solved exactly the problem I needed it to solve. It read my SSD drive like a charm. No hassle, no issues; just quick and reliable performance right away.The build quality is excellent. It feels incredibly solid, almost tank-like, and the full aluminum construction makes it feel durable and well-made. It’s also very intuitive to use. I didn’t even need to look at the instruction manual. I especially liked the lever mechanism, instead of dealing with tiny screws to secure the drive, the lever locks it in place perfectly, which makes setup much easier and more convenient.As for value, absolutely worth it. Honestly, the enclosure itself feels so well made that it’s worth keeping even if the SSD inside ends up being corrupt or unusable. Highly recommended!!!

I purchased this enclosure to repurpose an NVMe SSD as portable storage, and it couldn't have been easier to set up. The tool-free design is a huge advantage—just open the case, insert the drive, lock it in place, and you're ready to go in less than a minute.The aluminum enclosure feels solid and well made, and I like that it helps dissipate heat during larger file transfers. The connection has been reliable, and transfer speeds are noticeably faster than a traditional USB flash drive, making it perfect for backing up files, transferring large projects, or cloning a drive.Another thing I appreciate is how compact and lightweight it is. It slips easily into a laptop bag, so I can carry a high-capacity SSD with me without taking up much space. Everything worked as plug-and-play with no drivers or extra software required.For the price, this enclosure offers excellent quality and performance. If you have a spare NVMe SSD or need a fast external storage solution, this is an easy recommendation. It's well designed, simple to use, and performs exactly as advertised.

So far, this device has been working great. I’m using it with a 4TB NVMe drive connected to my Mac mini, and it has done an excellent job keeping the drive nice and cool during use. The build feels solid, the connection has been reliable, and performance has been exactly what I needed.I especially appreciate that it helps manage heat well, since NVMe drives can get pretty warm depending on the workload. For my setup, it has been a simple and effective solution. Overall, I’m very happy with it and would definitely recommend it to anyone looking for a reliable way to use an NVMe drive with a Mac mini.The product is extremely durable was easy to install it was a simple plug and Play. The cable length is a little bit short but it works just fine.

I bought this Sabrent branded enclosure because I planned to upgrade my daughter's HP Pavilion "Gaming" PC model 790-0010. I also bought this HP PC from Amazon circa June 2018. The stock loadout of this HP PC had a 1TB WD Blue SATA HDD.Not too long into the life cycle of this HP PC, I bought a WD Blue M.2 SATA 512 GB SSD and installed it into the HP PC's vacant M.2 socket and migrated the WD Blue 1TB HDD "boot" drive to the M.2 SATA SSD and turned the WD Blue 1TB HDD into a data drive. This gave a nice performance boost to this HP PC.Fast forward October 2023 and my daughter is telling me how the 512GB SSD is always full. My daughter who is not overly PC savvy didn't even realize that the 1TB HDD was still there for data storage of things like pics, videos and things of that nature. Still, she managed to fill her 512GB M.2 SSD with Steam and Blizzard games and needed more space.I purchased a 2TB Crucial P3 drive during Amazon's "Prime Day in October 2023" event. Per Crucial's website this NVME drive would work in the HP PC even though it was NVME and not M.2 SATA.I used Clonezilla Live via bootable USB thumb stick to clone the M.2 SATA SSD to the M.2 NVME Crucial drive.So let's talk about the Sabrent enclosure.I selected this because it supports BOTH M.2 SATA and M.2 NVME drives. Other products that I saw supported one or the other but not both. I also have other Sabrent products such as usb to SATA/IDE cables for connecting drives via USB. The handful of Sabrent products appear to be of good quality. They may cost a few bucks more but I like the piece of mind of having a quality product.The enclosure is easy to open up and install a M.2 drive into.Here is my minor quibble and why I removed one star from a perfect 5 from my rating. And this is more on me an not Sabrent.So the product page on Amazon has pictures of the product and has a product video that is officially from Sabrent with a guy named Mike in it. The guy says his name is Mike so I assume that's his name. Mike is happily demoing and showing off the enclosure. It's a great video and I am glad to have watched it.That said, it falsely put me under an impression about the product's use that was not true. To be clear though, the false impression that I was under is clearly documented in the included enclosure product manual. Had I consulted the enclosure manual first, I would have had no confusion. Still, Mike's charisma and charm were intoxicating and I was instantly captivated and trusting of anything Mike was telling me about this enclosure.During the video, Mike claimed that this enclosure supports multiple size M.2 drives. To accomodate this , the video indicates how easy it is to move the "locking pin/nub" to the appropriate locking hole in the enclosure so you can accommodate those shorter M.2 drives. Fantastic! This is great!So the video gave me the impression that regardless of the size of the M.2 drive you are working with, you will have to install a locking pin/nub into the correct locking hole to hold your drive in place so as to close the enclosure.This is not the case. I gather that most M.2 drives are of the 2280 size and the enclosure has permanently installed a turning locking pin at the front of the enclosure that will lock a 2280 sized drive in place. The included locking pin/nub for a shorter drive is in the packaging but not needed nor installed by default in the enclosure. The vide with Mike in it gave me the impression that the locking pin/nub had to be manually removed and reinserted each time a drive was put into the enclosure. That is not the case. Again, the manual calls this out clearly. But I didn't look at the manual because Mike told me everything I needed to know.When it became clear that the turning locking pin/numb in the enclosure is not removeable and then when I consulted the manual, it all made sense.So the confusion is clearly on my end. I should have looked at the manual first.That aside, this is a great product. If you need to clone an M.2 drive to another M.2 drive, you need this in your PC toolbox.I wish the enclosed USB C to USB C cable was a tad longer but not a big deal.I would happily buy more of these and use them as glorified thumb sticks for discarded M.2 drives I have from other upgrades.Great product.Thanks again, Mike! I still trust and believe in you.

5 stars because i like the companies products, but this device does come with some issues.. Unlike the PCIe model of this, the tool-free enclosure, this does not snap close well and seems likely to re-open on it's own if used for a portable drive...I put a Samsung 2tb 980 pro in it, and it fit good. the speed on my USB 3.2 port is just over 1000MB/s (read) as expected, write speed is just under that. Both read and write speed is consistent. The case gets HOT!, although the temperature is not as hot as my internal drive of the same type (1tb) says it is, so it should be fine.I will reiterate, I don't like the stability, or lack there of, that the closure clip provides. Otherwise it is top quality like all their products have been for me.

Most products have clearly recognized brand names, making the buying decisions a bit easier between the usually more expensive brands and the cheaper no-names. The buyer’s best advice is usually you get what you pay for. Although not a household name, Sabrent is generally regarded as on of the most trusted brands of this kind of SSD enclosure. So when I needed one this week, but only for one task to clone my computer’s internal drive, I looked for this brand expecting to pay a premium price. I was pleasantly surprised to find this model down in the same price range as some of the ones with the really low ratings. What was I giving up over the Sabrent I bought last year for sixty bucks?WHAT’S THE CATCHIf you put them side by side the difference is night and day. The premium model is much heavier, made of almost 100% aircraft grade aluminum while this model is part aluminum and part PVC plastic. But I also put this side by side with a really bad one that I didn’t even want to touch again, mainly because it was literally too hot to hold - imagine what it was doing to the expensive SSD inside. By comparison this one is much cooler, okay not as cool as the one that cost three times as much but at least it’s not going to set off any smoke alarms. Let’s face it, the two really important things are how cool it keeps the drive that it encloses and how fast the electronics inside let it communicate with your computer. A side benefit is being reasonably priced and it doesn’t hurt that it looks good.TOOL FREEif you’re going to put your SSD in an enclosure and never touch it again you can ignore this section. But if you have any intent of swapping the chip out a couple of times or more tool free can be a big issue. Why aren’t they all that way? There’s actually a good reason, if this enclosure is intended to safeguard your data drive through travel, exposure to the elements, prying hands, etc. having one that seals solidly shut is a good thing. This one is a prime example of superb design and simplicity. I only had to push one button to pop it open, slide the SSD into place and swivel a little plastic locking mechanism, no screws are needed. Then snap the lid shut and it’s ready to go.THE MISSING PIECEI have read the one star reviews that won’t accept this product because it doesn’t include the tiny set-screw. I’m not sure how to even react to that. Know this - it’s not needed, there is no place to use it. If you are using one of the shorter variants of SSD there is a small plastic plug to hold it in place, otherwise that’s what the full contact cover is designed to do.YES OR NOData protection is no trivial matter. That’s not to say that this enclosure will protect the data on the drive it houses but it does play a part in the equation. This one works as it should and I couldn’t even imagine trying to save a couple of bucks to go with a no-name one like I did last time and nearly fried my drive. This is a winner.

I use this a lot and it never fails me. It’s clearly quality made, and has lasted me a long time how. On SOME systems it doesn’t want to respect safe removal completely (select to remove the drive, it does seem to flush all write activity, but doesn’t always trigger the go-ahead to remove). I can live with that.It’s fast (when connected to a high-speed USB connection), such as a Thunderbolt 3 port. Also fully backwards compatible to slower USB type C and type A ports.I have two of these so far and both have been entirely dependable. I’ve used them to quickly back up entire Windows systems as the fastest external speeds the computer will support. The other I have a plethora of software, whatever I might need.

as advertised; works fine and seems solid

طلبت المنتج كما في الاعلان وتم ارسال منتج بديل بدون علامة تجارية وقمت بارجاعه

Boitier de bonne qualitée et débit bien suppérieurà une clé USB. Multi-boot avec Ventoy devient un vrai plaisirs.

Arrived in less than a week even after ordering from a different country. Package was sealed and had everything as described. Put in an nvme drive from my old pc so I don't have to fidged around with the motherboard on my new rig (I'm clumsy). Works like a charm!

I recently purchased the SABRENT USB 3.2 10Gbps Type C Tool Free Enclosure as a way to keep my additional NVMe as a compact and fast storage device, and I couldn't be happier with my purchase. The tool-free design made it incredibly easy to set up and the transfer speeds are incredibly fast thanks to the USB 3.2 10Gbps technology. The compact size also makes it incredibly portable, perfect for taking my additional storage with me on the go. I highly recommend this product to anyone in need of a high-quality and reliable external storage solution. Thank you SABRENT for creating such a fantastic product!