SuperATV Scratch Resistant Flip Windshield for CFMOTO ZForce 500, 800 Trail & EX, 1000 2014-2022, 1/4" Hard Coated Polycarbonate, Comes Preassembled, Can be Closed, Vented, or Fully Open, USA Made

This replaced a previous folding windshield where the fold was right in the field of view. Very annoying. The fit and finish was excellent, and installation was a breeze. I would highly recommend this windshield for those looking for an upgrade.

Very nice product. Nicely made, nicely packed, arrived in two days when it was supposed to be over a week, via UPS. All the products are made for 2014 and up but it "looked the same, particularly the hood shape. Was hard to tell on width and other things from the pictures so I decided to give it a try. I was gonna MAKE it fit! I basically dry fit the bottom and top to see where the issues might be. On the bottom, the first issue is that the width of the window including brackets was exactly as wide as the gap between the uppers. The kit comes with some spacers that are supposed to be between the roll cage and the brackets but I just left them out. Also, supposed to remove the mirrors and mount them back with the bottom glass and the longer bolts. 2013 has welded on mirror brackets that are above the screws and not in the way. I removed the cage bolts, put the bracket in then the spacers and nuts, just to cover more of the bolt threads. In general fit great, but then started on the top flip up portion.As you can see in the photo, the roll cage shape at the top is different and arches up instead of across. I could bend the mounting bracket and get the clamp angle to match but once I fit top and bottom in place I could see that the two pieces overlapped too much. The solution was to remove the clap on the top and bend the bracket up to match the angle, then used 3 radiator clamps on each to hold it solid in place.Still have overlap and I wasnt going to be able to close the windshield nicely so I drilled a new mounting hole above on the brackets so the two bolts would go through the top hole and the new how, effectively lowering the bottom glass 1/2 to 3/4 of an inch. With both mods the glass lined up well and I was able to open and close the top with no issues. I did make the bolts mostly tight, then used an adjustable wrench over the bracket and bent slightly forward, which helped seat the bottom against the body and tightened it down. There were two pieces of flat weatherstriping, and I put the small thicker one on the facing edge because the top wouldnt close enough over it to make a nice seal. The actual issue is vibration between the two pieces so i cut the thin weather stripping and put in on the bottom piece facing up so there is no vibration between the pieces. All in all it took me 3 or 3 hours including a trip to the store for clamps and having to remove the roof and my new replacement mirrors, which went back on nicely after I got the windshield installed.I hope the manufacturer reads this review, as I would be glad to give them photos and measurements so they can make an slight alteration in the two metal brackets and maybe a different top clamp then they would have a product that works for 2013 out of the box.My vote? Worth the time to make the mods and get the wind out of our faces on a cold day. We did drive with the windhield cracked (it has a partial open setting to let a little air in, but it doesnt blow near your face or body so its not really worth opening that tiny amount. Took it for a test drive in the dirt and we ended up with alot of dirt on us and inside the dash and windshield (Static is nuts too, made the dirt stick to it...). Not sure if that was from having a windshield or from having it cracked, will have to see next time I take it out.Hope this info is helpful.

Open vented or closed. Exactly what i needed. Fits well and works great.

Our windshield arrived in one of the best, most secure packaging that we have seen. The windshield far exceeded my husband's expectations; windshield is very thick, expertly crafted and fits our 2011 CFMOTO ZForce 800 perfectly. It rivals a $1000 plus installation of an electric windshield that a relative put on his ATV. Even better, no need to take your eyes off the road to reach down to toggle an electric switch; just reach forward and adjust the hinge. Husband only installed the bottom half so far and it took him no time at all. He was also impressed that the hardware that came with the windshield was better and stronger than the original on the ATV. Would definitely recommend and buy again.

You’ll be very happy if you read the instructions a few times and take your time. Instructions are ok but it’ll all make sense. Once installed, fitment is good and function is exceptional. I really like the 3 options when riding. The flip up windshield is very nice. SuperATV does a very nice job with their products.

This windshield comes with instructions to NOT use anything abrasive to clean it. I would not use ANYTHING other than some kind of a microfiber cloth. I usually only use water and an extremely soft cloth. I even try to power wash or at least hose off the windshield before I clean it with a cloth for fear it will scratch. Scratch resistant is a bit of an overstatement in my opinion. That said...I WOULD purchase this product again as it is the only custom windshield I could find for my 800 CF Moto side by side. The windshield opens and closes smoothly...I have driven my ATV with the windshield fully open and handles the wind just fine. The semi open mode works well also...and fully closed (using the gaskets included) shut out the wind well.

Husband said he can't believe how great this works.

Great product. Had to modify the brackets for the lower windshield to get a good seal over the hood.