Alla Lighting 7444NA 7443 LED Switchback Turn Signal Lights Bulbs, Dual Color Amber Yellow/6000K White, Blinker Lamps/Parking Lights/DRL Super Bright 7442 7443-A 7443 NA 7444 NAK

Switch from white to orange makes the front of the vehicle look great. Easy to install. The white is bright like fog lights

2021 Jeep Wrangler Non LED package. I purchased a flashcalplus product and with that these lights do not hyperflash. Otherwise they do. Beautiful bright white DRL and amber turn signals. Exactly what I wanted. Now I have a halo and drl lighting. It is noce to be seen.

The switchback LED lights are super awesome. I didn’t think they were gonna work at the way they do when the lights are on. They are bright and white. Then, when you turn the signal only the one that you’re turning turns yellow, and the other one stays white.. It’s a Must Have 👍🏼

I bought these a while ago back in early 2018 for my 2016 mustang gt premium. They worked great until I took them out for the opt7 sequential turn signals. Well I popped them back in because I had the opt7 sequential turn signals fail on me multiple times and I’m done not having a unreliable turn signal. And well sure enough when I popped these bad boys back in after sitting in the stock turn signal housing for over a year they work like they should. And they match the tri bar why better than the opt7 6000k. These are like a 4300k-5000k light temp. I’ll never buy anything from opt7 ever again. Horrible customer service and they wanted me to pay for shipping for the return and then on top of it all wanted me to pay for the new set up front and if they deem they are warranty worth they will issue a refund weeks from now. They are in the trash where they belong. I’m Done dealing with them. If you’re on the market for something different from stock get these. They are cheep, bright as hell “brighter than the opt7” and reliable from what I can tell. Plus one day shipping if not same depending on your area. Only good thing I got out of the opt7 was the resistor so my interior turn signal won’t sound like a running horse when trying to turn. At first years ago it didn’t bother me but months later it got real annoying so using the opt7 resistor on the stock wire harness worked great and the turn signal is normal.

I purchased these Alla Lighting LED's for my 2020 Jeep Gladiator, which came with halogen lighting from factory. On the Gladiator, the front lights consist of a DRL & parking light combo in one housing (using a 7443 dual-filament white lamp), while the turn sig's are a separate lamp (7440A single-filament amber lamp) in the adjacent housing. My intent was to use these LED bulbs for the DRL/parking lamp locations, and they do snap right in to the bulb holder, as designed . HOWEVER, once they were installed, I discovered that the DRL's were amber, and the parking lights were white... just the opposite of what was anticipated (and what is the norm for forward lighting). I debated upon returning them, but decided a simple modification the the OEM wiring (at the lamp socket) would correct the problem. I simply swapped the two "hot" wires feeding the socket, which then made the white light come ON in the DRL mode, and the amber light come ON in the parking mode. There are 3 wires at the socket: Ground wire (black); DRL wire (white/yellow stripe); Parking light wire (white/purple stripe). Swap the white/yellow & white/purple into the socket. Sooo... while Amazon says these will "fit" a Jeep Gladiator (and indeed they do fit the lamp socket and light housing), they will not operate with the correct colors in the "stock" configuration. A wiring change should be done to make the light colors correct for the application. Not a huge deal, but please be aware...

Actually ordered these by mistake but I’m pleasantly surprised. I intended to order ones with the built in canbus system. These do cause hyper flash but install some resistors and you’re golden. Amazing deal for the price and I’d buy them again.

I was really excited to get these . What a let down. I installed them. Turned them on and they were really bright and they looked great until I started it. The moment I did they started flashing amber. I have my DRLs enabled on my truck. The only way they would work correctly is with headlights on all the time. Returning them right away

I am sure this will not apply to everyone which is why I did leave a 5 star rating as the product is exactly as described and function as stated. HOWEVER, on to my specific application... I have a 2016 Chevy Colorado and rerouted the DRL circuit to power the parking lamps to take the strain off of my expensive head light bulbs (and because at the end of the day I like the look better of DRL's on crisp bright white parking lamps.) The down side to this application is that these Alla lights glitch off-white-amber then back to off-white-amber with only the DRL power coming in (half power than normal headlight operation.) They work great once the turn signal comes on and ZERO glitching at night when the Automatic light sensor kicks on the headlights and everything back goes back to normal power output. IF YOU are in the same situation as me it is worth every penny for Diode Dynamics brand switch backs they are more expensive but they work for MY modified application 110%. I tried these because some water got into one of the DD lights and corroded a connection, Long story short I'm positive my situation is unique or very few people will experience the same outcome. Just some quick info for anyone else trying my DRL relocate application. THIS PRODUCT WORKS as advertised and I have kept the pair as back up in case my new set of switch backs go down again. Thanks again Alla lighting!

great product what a differance

Not error free. Not compatible with cadillac, chevrolet, or Mazda

light no working RAV4 2020

A bit too higher then should for a fit. Hits the lense and wouldnt lock. Too fast blinking to be called normal or pleasant : need additional controller to line blinking issue. Bright for sure- that's the positive thing.