Wheel Well Guards | Rear Wheel Well Guards - Black | 79131 | Fits 2017-2022 Ford F-250/F-350 Super Duty 2 Pcs

They fit the truck perfectly and there were no issues with installation. I question how long the tape fastener is going to last but time will tell. If I have any issues with the tape I will advise you.

With what these trucks cost these days, it's a huge foul that Ford doesn't include rear wheel well liners from the factory. It looks totally dumb that the front has a nice liner and the rear is just raw paint. These are a perfect fit on my 2024 F250 Lariat. Install was super easy. If you have strong hands you don't need a trim tool to work the liner behind the fender lip like is shown in the manufacturer's YT install video. The install literally took 10 minutes per side. I had one mounting hole in each liner that was off by about 1/8". Easily fixed with a box cutter. I enlarged that hole a smidge and done. Not docking the product for that little thing b/c the rest of the liner is flawless. The engineer that designed the molds for these plastic liners should get a raise. They fit that well. Looks 100% factory. Shame on you, Ford, for making me buy my own. These liners are made of thick plastic. I don't see them ever wearing out. I will advise cleaning your wheel well REALLY good before install. Particularly the lip/arch. Dirt just sits there even if you hose off the wheel well very well. I used compressed air to blow the dirt out of the arch. Then I used a big car wash sponge and my car wash detergent/bucket to soap up the wheel wells really good and scrubbed them down. Rinsed really well with the garden hose. Used compressed air to dry it and let the truck sit in the 90-degree heat for a few minutes to let the rest of the water evaporate. You don't want to trap dirt b/t the liner and the paint if you can help it. The truck looks so much better now. Amazing how such a small change can have such a large impact. Now, the truck just "looks normal." Nothing special. But BEFORE the liners your eyes were immediately drawn to that appearance imbalance between the front and rear. At least my eyes were. This is a super easy install A 10mm socket or wrench is the only tool you'll need, assuming you can muscle the liner behind the lip without a pry tool. Highly recommend these Husky liners.

Un producto con una excelente calidad en su material y con un diseño a la media cien por ciento apegado a lo ofrecido.

Perfect fit for my 2022 F-350 XLT. The instructions were pretty good, and I had no issues with the installation. The installation took ~30 min.

Purchased for my 2017 F-350 dually. I know, it says will not fit. But, I trimmed about 1” off the rear where it bumps up against the outer fender. Fit perfectly, the trimmed end is covered by the outer fender liner. The only other modification was to the top 5 fir tree push pins holding the Ford outer fender liner. Cut them to about 5/8” and they will not interfere with the new inner liner. Always impressed with Husky quality. These are no exception, put the outer Ford liners to shame, with the bonus of a perfect fit.