VIVO Height Adjustable 17 to 32 inch Single Monitor Articulating Wall Mount for Standing Workstations, Fits 1 Screen with Max VESA 100x100mm, Black, MOUNT-VW01A

I bought this because I wanted to free up room at my Work-at-Home desk and just have a generally cleaner look. I think it did everything I wanted it too. Mount - mount system itself is nice. I like it alot. It feels sturdy, there is no excess play in the mechanisms. You have to slide the monitor all the way up and then it will disable the position lock. You HAVE to slide the monitor all the way down to re-enable the lock. If you aren't getting the lock clicks when sliding up, make sure to take it all the way down. Wall anchors - this is the one thing I ding this kit on. The wall anchors are fine, but feel brittle. I used 2 metal drywall anchors for the top load bearing holes, then 2 of the plastic kit anchors for the bottom just to secure. If you are careful, and predrill the holes a little, the plastic anchors should work fine. Monitor movement - monitor movement is pretty good. The only thing is there's no way to make the mount swivels/joint stiffer. The way I ran my cords it pulls on the left monitor a little and it caused it to want to rotate a little. If I didn't have the monitors tight up against each other this would be very annoying. Space savings - with this method you save all the room where the factory stands sit. You also save roughly 3.5 inches of space from the wall. Conclusion and notes - would definitely buy again. For me I didn't want to use a desk standing arm because of being up against a wall. Other wall mounted articulating arms require you to bend the arms, taking up room to get the 2 monitors flush. I've used them in the past. This mount eliminates that arm issue. Note 1 - to utilize 2 at a time like I did, you will want to be thorough with measuring out the distance between them so that they are as close to perfectly level and parallel to each other as possible. Otherwise they will run into each other or have an ugly gap. Note 2 - cord management ideas. I was in a hurry, but I will be adding a central cord channel when I find the right one. A thorough job would run the cords in the wall and pop them out at the bottom under the desk. I don't trust my drywall cutting skills, I struggled enough with making the 2 mounts square enough.

I was looking for a direct wall mount, but all either had to be anchored to a stud or were otherwise complicated. This one includes very sturdy drywall anchors (I've used the same type for guitar hangers that weight a LOT more than my monitor), and allows the monitor to slide up/down and twist up/down/left/right and rotate. I have a straight-in HDMI cable which got a little snug (this bracket is pretty close to the wall, but I just inserted a few 2-3mm spacers between the bracket and my monitor, and it fits fine. In a perfect world, I would have bought this bracket first, and then bought a cable with an L-shape plug (but like I said, it fits and it's a pretty long plug). It does not articulate closer/further from the wall, but that's not what I wanted -- I have one of those for my laptop, but this monitor will be stationary for me.

I bought this product to stack my 2 PC monitors above each other. I used this on the top monitor due to not needing it to articulate at all. A slight tilt down works perfect for me. This mount was a breeze to install, it took all of 10 minutes to put up. It comes with all hardware needed to install. You just need the tools to get it done. I was able to use the plaster wall inserts for the install and have, so far, had no issues at all. It is sturdy, isn’t loose, and looks good. I did not have studs where I wanted this monitor placed but again these wall inserts are doing great. The monitors are 23” so not very heavy but this mount is great. I would definitely recommend this mount if you can use a fixed mount system with tilt only. I also really like the way it is height adjustable. As you can see in last pic it has notched marks where you can lock monitor into different heights if needed.

Sturdy mounting, but has a bit of movement side to side. Not issue if using regular monitor, but can be annoying with touchsreen monitor.

Purchased 2 for 29” Ultrawide monitors. Easy to install. Good price. Holds the Ultrawide monitors with no issues. The up/down adjustability works great. I mounted into a stud on 2 the 4 holes. The others 2 holes were left blank. It was really tight on the wall and the computer monitors weigh very little. There have been no issues after months of use so far. I’d buy this mount again.

Awesome, frees up so much space on my desk. Makes my monitor work more like an easel.

I had such high hopes for this wall mount. I have a 32 inch monitor and it won't stay straight. It keeps wanting to tilt and there is no way to tighten the tilt mechanism. In addition, twice now I have had to reset the part that raises the monitor. It keeps creeping down slowly until it reaches the bottom. Of course, the 30 day return window has closed so I am stuck. Installation was not difficult. However, this is NOT a good value for your money.

Have nothing to do with the seller! Those people who complain that this cannot lock in place, this is because YOU don't have a single clue how to do it! You have to move the little plastin notch. The product is very stirdy and seems like a very well build.

Heel handige monitor-muur-mount-plate (!) In hoogte verstelbaar (+ kantelen , tilten , draaien) & geeft (zoals in mijn geval) meer stevigheid (door groter verbindingsoppervlakte) aan de Gyproc-plaat , waar de monitor op bevestigd moest worden.

As per instructions, for height adjustment, the monitor must be lifted to the top position in order to slide down to the lowest peg. Doing so allows the ratchet mechanism to engage so that the bracket height can be adjusted upwards in increments. This also means you must ensure that the monitor has sufficient clearance to be lowered to the bottom position of the mount. Material is sturdy and various screws were provided for VESA/wall mount as well as drywall plugs.

Ajustes muitos precisos. Tamanho ideal.

I was looking for a slim monitor mount that would hold the monitor as close to the wall as possible since I have a small space. This one puts the screen about 3 inches from the wall (of course this will vary a bit depending on your monitor). The tilt, angle, and rotation adjustments are very easy once the monitor is installed. The up/down adjustment is easy enough but, due to the design of the locking mechanism, it can only move upwards, that is until you reach the very top, then the locking mechanism disengages, allowing you to move it downward again. Starting to move upward re-engages the locking mechanism. So it's a little bit annoying and tricky if you wish to move the monitor down by only a single notch or two. But you should only need to do it once and then you're set. Note also that this mount has no side-to-side adjustment at all, so you need to be very careful to drill your holes in just the right spot if you are particular about where you'll want your monitor to be horizontally. But other than that, installation is very easy, the instructions are good and clear. Other reviews have mentioned that the provided wall anchors are cheap and breakable, but mine came with very large white plastic "screw in" style of anchors, very sturdy. Highly recommend!

Lo he usado con un monitor de 24” para tenerlo lo más pegado posible a la pared y me ha gustado mucho. El sistema de subir y bajar es por pasos, es decir, por enganches tipo cremallera y para bajar primero tienes que subir del todo, no es lo más cómodo del mundo pero tampoco voy a estar subiendo y bajando 10 veces al día. El soporte da un poco de juego de inclinación vertical y horizontal y también puedes poner el monitor totalmente vertical, puedes girarlo 360°. Los tacos y tornillos para anclarlo a pared no me han gustado mucho y yo he puesto los míos propios.