Note:Pls check the size information（in the picture) before you purchase.Specifications:Dimensions: Grab Bar Length: 15.75inch /40cm including the base; bar diameter: 1 inch / 2.5cm , base diameter:2.16inch/5.5cm.Material: Stainless SteelInstall: Wall mounted, come with screwsPackage: 1*Grab Bar with ScrewsFeature: 1.Ideal for safety in sanitary facilities, bath tubs, shower cubicles, next to the toilet, near the stairs or next to your chair - to apply on all smooth surfaces. 2.Knurled patterns for a non-slip secure grip. Hidden mounting flanges with snap on covers. Includes stainless mounting screws，making it long-lasting, rustless, anticorrosive and easy to clean. 3.The Stainless Grab Bar provides leverage, support while adding a decorative touch to your bathroom. The decorative cover concealing the screws. Crafted from stainless steel for lasting quality and durability, and available the Non slip knurled surfaces on the middle to coordinate beautifully with most bathroom finishes. 4.Children and the Elderly can take the bar to maintain balance and prevent, especially on to wet bathroom floor or if you showering. Protect you and the safety of the family, especially for the elderly. Install step:1. To install the bar, put a plastic bushing on each end of the bar, aligning the screw holes on the plastic bushing with the screw holes on the ends of the bar. 2. Position the bar where it will be installed, making sure to position the ends of the bar where it is safe to drill/screw into the wall.3. Make markings for each of the screw holes on the wall. a. If anchors are needed (e.g, when installing in drywall), drill appropriate size holes for the anchors and install anchors in the wall.b. If anchors are not needed, drill appropriate size holes for the screws.4. Hold the bar in place over the holes and install screws.
L**N
Well made but they don't know how to measure
This is advertised as a 16" grab bar and...well....it's not even close! The first clue should have been the package dimensions...it says it is 15.98" long...well, it would be difficult to fit a 16" grab bar in a box that isn't 16 inches! Actual measurement is about 14.5" so don't plan to screwing it in to studs on both sides because that is not going to happen unless you have a very strange building. We ended up mounting it vertically...still gives us pulling power to get up and both ends are mounted into a stud but it's the same stud! It does seem to be well made and very sturdy but someone in the manufactures plant has no idea how to measure. Last time I checked, 16 inches did not mean 14.5 inches...it meant 16 inches!
D**Y
Great product, Great price for two!
I did a lot of research before I purchased these. I needed to install these inside the door jamb leading to my garage. The mounting plates for most other models is too wide for the 2 1/4 I had to work with. These rails fit perfectly. They are sturdy, look nice and function as advertised. ONE SUGGESTION FOR MOUNTING directly into wood. Choose a drill bit that is just slightly smaller than the screws provided, AND use an extender for the bit and screws if possible. This will help you drill straighter holes and screw in the screws straighter. The bar tends to get in the way of the power drill when you are installing.
J**Y
Seems nice/mounting problems
I bought the 18" handle. Product appears like it should do the job as advertised. Knurling could cover more of the tube. Only 7 3/4" out of 15" of straight tube knurled. I have mounted two in the house from local purchases and their mounting bases are flush with the wall. This comes with cupped ends where there is 1/4" plus from the cup edge to where the mounting strews come out of the base of the cup. The edge is all that contacts the surface you are mounting it to. High chance of wiggle problems on plaster board/drywall or other similar products. As for the screws if you are mounting to a stud, yes you will want longer screws, I'd use molly bolts for for drywall installation. Otherwise I'm not sure of the 500 lb advertised weight limit. Going to return the pair I've received due to the mounting issue.
C**D
Good Value
Although not a problem, there are no instructions with the grab bars. However, step-by-step picture instruction are on Amazon's product description page. Installation tips: If installing on a ceramic tile wall, I highly recommend using a tile/glass bit. You will need a 5/16 inch bit. These bits usually come in a set of four or five sizes and are available on Amazon. Use a slow drill speed with light to moderate pressure. let the bit do the work it is designed to do.
G**N
Strong bars
Phillips head Screws (6) are cheap material , they round off upon installation . The bars are nice and strong. Look good and knurling is just right. Use a good quality set of US made screws. Would buy again.
Trustpilot
3 weeks ago
4 days ago
