EDGEWOOD 5 Drawer Vertical File Cabinet Filing Storage Wood Organizer Dresser Chest Under Desk, 16" D x 16" W x 26" H, White

This is a perfect fit for a corner of our walk-in closet and matches the other cabinets. The drawers have wheels that roll on metal rails which I consider a plus at this price level. It is not advisable to use a drill or powered screwdriver for assembly due to the possibility of stripping screws in the engineered wood and getting loose contact. But there are a couple hundred screws to put in, so I used a small ratchet screw driver which worked great. There were only 3 or 4 screws that did not "bite" during assembly of the cabinet, drawers, and drawer hardware. However, the screws holding the casters in place are all less-than-tight. If that ever becomes a problem, I'll drill through the bottom to add small machine screws and nuts in place of the orginal short wood screws. Before assembly, I laid out all the pieces and was careful to identify all the pieces especially right versus left on the drawer hardware which have hard-to-see markings stamped into the metal. Once it was all laid out, assembly went smoothly.

Our home came with cabinets that did not have drawers. BUT I found this storage unit and after measuring and ordering, turns out it fits perfectly inside my 24" cabinet. Now we have room for utensils, pot holders, other stuff we need for our kitchen, Fairly easy to build, heavy, drawers glide very well, would recommend.

This piece of furniture took us 2 hours to put together and it still didn't work. We got the frame together and the cabinet rollers on the inside done. When we got the drawers together and inserted them into the cabinet the door would roll fine 1-2 times and then get stuck and the drawer would not come out under any circumstance. We couldn't find a reason at all!!! We would giggle it around we would try cajoling it out but it wouldn't budge at all like there was something in its way but looking on the track there was nothing. This happened to every drawer. We ended up breaking the drawers trying to get them out to fix them because of it!! Just awful I bought this for my daughter in her dorm room and it was just a piece of crap!!! DO NOT BUY!! This has a major defect in the construction of this. I would really like compensation for this item because it didn't work at all and took up so much of our time trying to assemble then trying to fix it that we couldn't fix!!

I needed drawers that would fit under my office credenza and this unit had the right dimensions. Several reviewers mentioned difficulties closing or opening the drawers. However, I bought two units anyway because they were the only ones I could find with the dimensions I needed. I ran into trouble with one of the units, where if the drawers did not go in exactly straight, each would get stopped by the middle screw of the right track. Since the tracks have three screws each, I removed the middle screw from each of the five tracks and the drawers work find now. If the drawers did not have this problem, I would have given a 5-star rating.

I bought this as a partial replacement for a bookcase but ended up using as a sewing cabinet. The drawers are perfect for holding material, sewing tools, and many other items. It is a perfect height for having a cutting mat on top that I can use while sitting. But most important to me was the customer service. I made a mistake which made it impossible to use a couple of boards and the seller immediately sent replacements. I recommend both this item and the seller.

I have assembled lots of this type of furniture- IKEA, Sauder etc and this was no different. Directions are clear and the extra hardware, although not needed, was appreciated. The key is to not over tighten the fasteners, the assembly will become much more sturdy when complete.The problem is even with all the effort I took to make sure things were square, the bottom drawer will not pull out. I suspect there’s an interference with the lower base support member. All the other drawers work fine.So my options were to:1. Disassemble the base and try to correct the interference2. Disassemble everything and return3. Live with 4 of 5 drawers working.I picked 5, contacted the supplier who issued a partial credit. With these materials and connectors you only get so many attempts before the particle board fails.Disappointed because it fits in the space I have perfectly. I’ll use it until I find something better.

Really happy with this. Still working out the home office thing and realized I had no drawers to really store paper, odds and ends etc in. Liked that this would fit under my desk perfectly. I opened the box and saw a Gawd awful amount of pieces and thought "this will take years and drive me insane in the process". Nope. VERY easy...just follow the directions. Probably took me less than an hour to put together and it really looks nice. All pieces there plus extras which was reassuring. I would think if you were a sewer or crafter, this would be perfect. I love it.

Sturdy product. The instructions were literally just pictures though with no words so it took me long than expected to assemble. Other than that I really like it and think it was a good price for what you get. I use it to hold nail products.