1216 Full-Size Black Hard Knife Sheath | Tools

Tut was es soll full size ka-bar passt sehr gut rein. Allerdings für 25 euro erwarte ich schon sehr gute qualität zwar nichts personalisiertes aber schon hochfertige serienprodukt. Geschätzte Material einsatz 2 euro. Billigeste hart plastik. +1 stern für die schnelle lieferung +1 stern für funktionalität -2 Stern für die qualität/kosten -1 für die Artikel Beschreibung

I have an Ontario Knife Company 948 Knife and it is basically the same design of the Kabar that this sheath is designed for, but it too suffers the same problem whereas it comes with a terrible (albeit leather) sheath from the factory. I took a gamble buying this as I couldn't find any reviewers that tried something similar but I was pleased to see that it fit perfectly! I attached some pictures (even the handle guard fit the exact way into the sheath and clips in perfectly!). I was so thrilled that I ended up buying a second one of these to use on a different knife I own. I re-purposed an old Scuba Diving knife for camping (the Cresci Orca), but the problem was that it came with a rubber sheath meant for undersea diving and strapping the your leg over a wet-suit. The knife itself actually is wonderful for other outdoor purposes, but I needed another sheath that was meant to bring backpacking. I did have to make a few slight modifications though, since the Orca is about the same length as the Kabar I thought it would fit perfecly, but the Orca is a little bit thicker (not wider, but the thickness is a bit more). It fit into the sheath but it was a tight fit, so I took a heat gun and gently heated up the sheath with the Orca inside so that it would form better to the Orca, and that worked perfectly! I also had to cut off both top parts of the retainer clips on this sheath so that the Orca would fit in either way (it has a rather large handle guard buy only on one side). I attached some pictures, hopefully someone else will find this info useful as I was searching myself before I tried this and I couldn't fin anything online. All in all, this is an excellent sheath and I like how it has a lot of mounting points for lashing, very customizable! I ended up adding some paracord to mine, but there are also plenty of mounting points for webbing as well if you want to go that route.

Excellent quality. Fits the standard Ka-Bar USMC 7" Knife like a glove. I ordered additional quantities after seeing the quality and fitting of the first sheath that was received by me.

I owned an original Ka-Bar Marine Corp knife back in 1976. It was sold with a sheath and in a box with the Knife’s Blue-Print, printed on all 3 sides and both ends of the box’s lid. It was part of a 1976 limited edition commemorating the 200th anniversary of the U.S. Marine Corps. These days, you can still buy a Ka-Bar 1217 box that looks much like the box that was originally released back then. The seller makes it clear that it’s a ‘newly printed’ box and it isn’t printed by Ka-Bar. I’ve since bought another Ka-Bar 1217 but it came in the standard Ka-Bar box. However, I bought that blue-print box replica on eBay (without the Knife), about a year ago. The printed details on the replica aren’t as good as the original and I could easily tell that it was a reproduction, (which was made clear by the seller). If you’ve ever seen and/or owned the original you’d be able to tell the differences. In fact, I lost my original Ka-Bar 1217 Knife, box, and all, years ago due to a ‘running span of bad decisions’ (always regretted that). OK, so much for nostalgia. When I saw this hard-shell sheath in Amazon (sold by “Blade Shop”), I thought it looked better than the more expensive Kydex sheaths that I’ve seen on line. This sheath material is glass-filled nylon plastic, and made by an injection molded process. Kydex is an acrylic & PVC material that’s thermoformed from a sheet. The glass-filled nylon sheath is characteristically more brittle and more abrasive as well. Kydex is more impact resistance and less abrasive so it won’t scuff up your knife as quickly as the GF nylon sheath would. But then, Kydex cost more than GF nylon and in this particular case, the GF nylon sheath looks better, (but that’s my own opinion). My Ka-Bar knife slipped into the sheath easily and with a slightly applied pressure, snaps into place. At that that point, the knife if secularly locked into the sheath and there was no rattling or movement. The knife was snuggly in place until needed. This allows the sheath to be confidently mounted upside down (blade up) on a web-gear strap without snapping the sheath’s handle strap around the handle (which is my personal preference). In fact, the sheath can be placed in any position on the gear you happen to be carrying, (vertically, horizontally, and any position in between). To remove the knife from the sheath, it’s a simple matter of grabbing the knife handle and then pressing your thumb against a molded part of the sheath. The knife will then snap out of the locked-in part of the sheath and then be entirely removed for use. The only thing I would’ve liked to have included with the sheath was a length of paracord. Of course, I’m sure that for such an inclusion to be practical, it would’ve meant a good, long, piece of paracord and that certainly would’ve raised the price of the sheath. I haven’t had the sheath but for a few days and can’t comment on anymore than I have already. Only time will tell how well the sheath holds up and if any scuffing may occur on the finish of the knife from repeated use. As afar as I’m concerned, this is a great product. The design, aesthetics, Fit and Price are all absolutely 5-Stars and I recommend it 100%.

Lo único que me parece malo sobre la funda es que me cuesta un poco desenvainar el cuchillo con la hoja hacia abajo, pero puede ser mi culpa y no de la funda. Indispensable para aquellos que quieran una funda más resistente, duradera y segura que las de piel.