3M Headliner & Fabric Adhesive, 18.1 oz., Exceptional Strength Bonds Heavyweight Automotive Fabrics to Metal Surfaces, For Bonding Headlines, Carpet, Foam and Others, Quick & Easy Application (38808)

I purchased the 3M Headliner & Fabric Adhesive to repair a sagging headliner, and it worked perfectly. The adhesive sprays evenly and provides a strong, secure bond. Application was straightforward, and the nozzle gave good control without clogging. After applying it, the fabric held firmly in place and hasn’t come loose since. The bond feels strong and durable. I also like that it doesn’t soak through the fabric when used as directed. For automotive interior repairs, this adhesive does exactly what it’s designed to do. Overall, this is a high-quality adhesive that delivers reliable results. Strong hold, easy to apply, and well worth it. I would definitely buy it again.

I’ve been using this 3M headliner adhesive for fixing some old car headliners, and it really holds well. i was worried it might be messy, but it went on smoothly and dried quickly. it’s been a few weeks, and the fabric hasn’t budged, even on the hot days when the interior gets stuffy 🚗. if you need something reliable that sticks heavy fabrics to metal, this is worth trying out. simple to apply and very effective.

I think I can write a comprehensive and helpful review on this because I ended up using this 3M and Permatex Headliner Adhesive on the same project (replacing sagging headliner in Honda Accord) side by side I was probably laying 3M down a bit thick, sprayed twice over certain areas and one can was not enough. There was about a foot left on the main ceiling surface and I wanted to fold and glue a bit of fabric over the edges, so I ran to local auto-store and Permatex was all they had. Both glues worked very well and headliner is firmly in place. The main difference is in application and drying time. 3M can has a more precise nozzle that doesn't gum up but it sprays really thin, to a point that you can't clearly see if there are any bold spots left. 3M had slower drying time and let you pull back and reapply the headliner more easily. Permatex lays glue much thicker and it is easier to see what is covered. Drying time is MUCH shorter. Still easy to do immediately after contact, but if you moved on, see a bubble forming down the line and have to peel back larger section, it becomes more challenging. Permatex nozzle gummed up few times and if you don't clean it before spraying it deflects the stream. Orvall there's no real complaints about either, but I found working with 3M a little easier and more forgiving, especially for the first time. A word of encouragement - if you are not sure about replacing headliner yourself, don't hesitate and just do it. If you are even a little handy, it is not hard or requires a lot of skill, just give yourself plenty of time and go slow. If you have a helper it would be even easier. There were few times when a second pair of hands would be useful, but it can be a one-person job. After getting outrageous quotes from the shop and watching some YT videos I decided to do it myself and it came out great.

The 3M Headliner & Fabric Adhesive has proven to be a trustworthy solution for securing and repairing interior upholstery. With its strong bonding capabilities and ease of use, this adhesive is a go-to choice for various automotive and home applications. Pros: Strong Bonding: The adhesive's ability to create a durable and reliable bond on various surfaces, including headliners, fabrics, foam, and more, ensures that your upholstery repairs will withstand the test of time. Versatile Applications: From fixing sagging headliners to adhering fabrics to various surfaces, this adhesive's versatility makes it a handy tool for both automotive and household projects. Aerosol Application: The aerosol can design simplifies the application process, allowing for even distribution and coverage on larger surfaces. The fine mist minimizes the risk of oversaturation. Quick Drying: The adhesive dries relatively quickly, allowing you to proceed with your project without prolonged waiting times. Professional-Looking Results: Properly applied, the adhesive delivers a neat and professional appearance to upholstery repairs, helping to maintain the visual appeal of the interior. Cons: Ventilation Required: Like many aerosol products, using this adhesive requires adequate ventilation to avoid inhaling fumes. It's important to use it in well-ventilated areas. Initial Odor: The adhesive has a noticeable initial odor, which dissipates as it dries. However, those sensitive to strong smells might find this a minor inconvenience. In conclusion, the 3M Headliner & Fabric Adhesive offers a reliable solution for upholstery repairs and projects. Its strong bonding capabilities, versatility, and aerosol application make it a practical choice for both automotive enthusiasts and DIY home improvement projects. While ventilation and initial odor are considerations, the adhesive's overall performance and ability to deliver lasting results make it a valuable tool for achieving professional-quality upholstery repairs and applications.

I found this spray easy to use and it distributes evenly. The nozzle allows for good control during application, and it didn’t clog at all. Once I sprayed it on my fabric project, it stayed firmly in place without any signs of loosening. The bond feels sturdy and dependable, which is exactly what I needed for my craft work.

This adhesive worked out great on my project, typical 3M quality.

Good as always. Holds well, very sticky so don't get it anywhere u don't want it (hands, on fabric etc). Have only used about 1/3 of a can for a smaller project but when I did my headliner I got about 92% of the headliner adhered before running out.

Works great! Used one can for the headliner off a 95 Nissan pick up king cab. First time reupholstering a headliner. It’s like going back to elementary. Cut and paste. Very easy to do. Saved $200-$250 getting its done by a “professional”. DIY!

Had some sagging headliner where the previous owner had installed a dashcam. I put this on a few months back and it's been holding quite well through the heat and the cold. I used this on quite a small patch of headliner, and as such, I'm not sure how this would work for larger applications.

I can't use it. Tried it on a patch of cloth in the car and it looks awful!

I did the headliner in my 2006 silverado crew cab. The product itself works well. It tacks up fairly quickly and holds once it dries. If it soaks through it stays clear. Also if you get some on the front, it can be picked off after. 1 can does a single headliner. Make sure you remove the foam from the old headliner. I used a brass wire brush in my drill. Just be delicate. Make sure your new headliner is double stretch or it won't fit to contours well. If you want to see my youtube video on this look up "Modern LBZ Interior Upgrade" It took me three tries to do.

Great product held up the headliner with no problems ! Buy extra cans since one of the cans I had gotten didn’t spray the best right out of the box.

Good product, has worked through the hot and the cold for over a year and a half. It does take some getting used to when working with it, so test sprays are recommended, and a light touch is probably safer than a heavy one to prevent dimples. No noxious vapours to worry about, though best to perform work in a ventilated area. My only nitpick is it seems to have less adhesion on sections of headliner repaired using fibreglass and epoxy resin, YMMV. Also, it might be a good idea to be prepared for overspray onto the fabric side of your headliner by having some 3M adhesive remover on hand, as this adhesive is pretty stubborn!