Shepherd Hardware 9122 1-1/8-Inch Inside Diameter Rubber Leg Tips, 4-Pack, White

I have always made sure that we cover the bottom of the legs of our chairs so that the floor doesn't get scratched. In the past I have used those felt pads, but they always seem to get rubbed off at some point and by the time I realize it there is a gummy adhesive goo on the floor and quite possibly a scratch as well. I don't quite remember how I got turned on to these for our kitchen chairs but they are great. They slide easily and protect not just the bottom surface, but the whole bottom of the chair. Make sure you measure the width of your chair's feet at the bottom as these come in multiple sizes. Buying on Amazon has saved me a lot of money compared to going to the hardware store.

These are perfect to replace the missing plastic caps on my old ironing board. In fact, they are much nicer than the plastic ones that came with it. We moved and somehow the top caps fell off. These are so much better that I am replace all four of them. Thanks. These are perfect.

Got these to use on an inexpensive ironing board and they far out do the ones that came with it. Had two missing and got these and they cut down the wobble by at least 60%. Most of the wobble comes from the light weight material used these days and the legs get out of shape (warp) easily.

Last time I bought a pack of these, it was at one of the big box hardware stores. They only had one size. I bought them only to find out they were too big. I like that these are sized. I actually had the foresight to measure the legs of the stepladder I needed these for. With the exact size, these fit a lot better.

These went on easily and are snug when in place. Keeps my ironing board from scratching the floor. These are the perfect size; the ones readily available at supercenters and even the large hardware stores are not the right size.

Great for my intoning board that was missing two of the leg end caps. This actually is better than the end caps the ironing board came with. Really happy with the product.

I used this to replace a missing ironing board cap end cover. I think these will last much longer than the hard plastic end covers that came with the ironing board.

The back feet of my metal painters stand were 1/8th larger. So ordered 1 and 1/8th inch rubber feet (had the washers) so the legs wouldn't cut into the rubber. They fit perfectly.

I am very happy with the product, just if you plan to use it on the shower seat, you need to make a hole in the bottom part to let the water out.Good traction with the ceramic floor or acrylic bath tab.

They work perfectly for what I wanted them for. You just have to measure correctly. I have bought these previously in a larger size for my ironing board and they worked great.

Purchased them to replace rubber feet on the bottom of a chair that is used in the bath. They fit well and the chair doesn't slip on the porcelain bath surface. Needed to drill a hole in the bottom to let the water drain out after a shower.

Bought these to replace the old set on our dining chairs from scratching the hardwood floors. The first set lasted over 10+ years and finally started to crack hopefully these will last as long as the previous ones. These are the best and is a must to have on furniture legs to protect from scratching!

Good quality and fit perfectly.