OMTech 130W CO2 Laser Engraver with Water Chiller, 35x55 Inch Laser Cutting Engraving Etching Machine with Autofocus Autolift 3 Way Pass Air Assist, Industrial Laser Cutter for Wood Glass Acrylic More

I started researching Co2 lasers a few months ago. I looked at importing a machine and determined with shipping and duties it would cost more. I looked at ebay but found a lot of people had bad experiences on Ebay. Then I read on a FB Forum about Orion Motor Tech and found that a lot of people had positive things to say about them. Even when someone received a machine with an issue it appeared that Orion Motor Tech took care of the issue right away. This gave me the confidence to purchase this machine. The machine arrived 10 days after I ordered it. It came from California and I live in NC. The delivery crew was great and they put the machine where I asked. I have included pictures of the crate and the machine in and out of the crate. Everything was was in great condition and packaged exceptionally well. There were no scratches on the machine. I have also posted a couple of pictures of some things I cut out of 1/4" plywood on the first day I had the machine running. I know I have some tuning to do as I have not owned one of these machines before but not bad for first attempts. With regard to things included with the machine. The CW-3000 is not a sufficient chiller to cool a 130 watt machine. I also ordered a CW-5200 and roller Rotary from Orion Motor Tech. I think the machine should come with the CW-5200 chiller. The Ruida controller is great and works with Lightburn which from what I have read is the software most people choose to use. The laser Tube is a Yongli H6 tube and is rated for 7000 Hours . Has a rated power of 130 watts and max power of 140 watts. It seems to work as well as I could expect. I do plan on swapping the tube with a RECI brand tube if and when this tube goes bad. There are 2 6 inch exhaust ports on the back of the machine. Each port has a built in fan but I am replacing those with an inline 8" exhaust fan that will have both 6" exhaust going into a T and then into the 8" exhaust. I am also upgrading the Air assist with an Air Compressor and solonoid that is controlled by the Ruida Controller. These are all upgrades that are suggested by folks who buy Chinese imported Co2 lasers and should be expected by most who research them.Anyway, overall. and excellent buy for the money and very pleased with the machine. I look forward to getting a lot of enjoyment out of this machine and would highly recommend Orion Motor Tech to anyone who asks. A friend saw what I received and he ordered a 60 watt machine the next day from them.