Xitomer Fender Eliminator, Fit for Daytona 675 2013-2017/ Street Triple RS 765 2017-2025 / Street Triple 675 2013-2016 Tail Tidy, Compatible with OEM and Aftermarket Turn Signals, with LED Light

Good fender eliminator. Looks good. Easy to install. Make sure you keep your Factory bracket so you have something to screw into. LED is bright.

Fits 2025 765 RS just have to use your old hardware and used old turn signals. Cheap but effective solution for removing ugly fender/tag holder.

This does not come with any hardware whatsoever!I guess they expect us to zip tie the lights to the kit, so no thanks, plenty of other brands out there that will give you EVERYTHING you need to install.Edit: after going out to buy the hardware, i tried the installation. It will not fit the gasket, under the tail. Also, the license plate light does not fit any of the connections.I dont know what bike this is meant for, but i know its not for the 2024 triumph street triple 765 rs

Just a heads-up, there are no instructions... Not that it's hard to figure out... Also you will need to buy some lock nuts to finish the install. I was lucky enough to work in power sports. Giving a 4 because I feel the hardware to finish the install should be provided.

This is a basic tail tidy. It is relatively inexpensive compared to the other $125-175 options out there. This did not work for my 2015 Triumph Street Triple 675 R ABS until I gerry rig modified it. The issue is that the rubber grommet that comes stock with the bike to keep out water and debris from getting into the seat compartment has a fairly big hole for the wires to go up into the compartment under the seat, but the fender eliminator has a tiny hole for the wires. So either you can't use the rubber grommet (unwise) or you have to spend a bunch of time with drill bits and metal files to make the hole in the aluminium of the fender eliminator match up with the mounting bracket. And even then, there is a pretty big hole at the pointy end of the mounting plate. It looks like this was designed to be a universal part to fit several bikes, not this bike speficically. I also had to use large washers as spacers to keep the part from wiggling around even with the bolts tightened down completely. All in all, I was able to get it to work, but only with a bunch of customizing. I am relatively happy with how it turned out, but I probably wouldn't recommend it to someone without the willingness to tinker with it to get it to work.

It's powder coated, fits perfectly. Looks great. What's not to like? GREAT deal for $35!!! Really well done.

Worked perfect on my 2020 street triple R!

So this does kinda work on a striple, but it leaves a fairly large hole on the underside where water can come in. You will also need to splice into your existing plate light and reuse the connector. The fitment isn't perfect, and will also require washers or a spacer of some kind. I'd recommend picking up some plastic washers and placing them on the top side of the bolts.I'd also recommend picking up some flexible conduit, as the connectors for all the wires will not fit into the compartment under the pillion. Leaving your wires exposed just above the rear tire is a really bad idea.It does work, but I'd recommend buying a higher quality kit like the motodynamic one if you aren't comfortable splicing wires or mcgyvering fixes. This isn't a simple bolt on kit, as it does require some modifications to get working properly.A quick tip for reusing the existing grommet is to fold it into itself, as otherwise you'll need to widen the hole for the wires.