SOLAREZUV Cure Clear Casting Resin (Quart) DIY Jewelry, Hobby, Craft Decoration Making - Crystal Clear Solar Cure Molding Casting Resin ~ Non-Yellowing! Cures w The Sun, Sunlamp or 385nm UV Lite

The only thing I don't like is that it smells and can be quite runny. I have used another UV alternative but it was curing slowly and giving the resin too much time to shrink. Crystals starting forming while curing even after using a heat gun to remove the bubbles. This product also does not need a heat gun, few bubbles that be easily stirred away. The heat gun will but the resin and will start to smoke. I also like this product because it comes in larger options. Small, medium and large.Edit: this product seals perfectly and forms your item with precision. However, it will not create a bevel affect like other uv resins. I use this product to avoid bubbles when I'm dealing with designs with engravings and then I add another UV resin that has more of a shine to it and will bevel like a button.

Bought this product for small business making jewelry.More liquid then I expected but easily adjusted to it. The product does what it advertised. However, for those who want doming, you may want to buy an additional product to apply over your finished pieces. As with all chemical product that has reactions, there will be a smell. But that is minimal in my view. Disappointed that the quart size is in a container like a paint can. Feel it would do better in the same container as the pint which is enables you to pour your product. You will have to purchase droppers for any size other than the pint.

I bought this due to it being one of the only UV Resins that was more than a few ozs. I wanted to use this to make the epoxy tumbler cups thinking it would be faster than waiting for normal resin/epoxy to cure....Said it would cure in 3 mins with the light or sunlight with 1/2 and inch of thickness- I had bought a 405nm Light to cure, (minimum needed said was a 385). While I did not use sunlight, i did have my light about an inch away from my project, and I estimate I only used less than an OZ, spread very thin over the tumbler, and checked on it after 10 mins. (I figured the UV light would need a bit more time) But it was still really soft and sticky. I gave it another 20 mins and yet still sticky. I ended up having to leave, so it spun for about 24 hrs under the light before the stickiness went away. VERY disappointed that it took HOURS to cure, rather than the few mins it stated.People mentioned the smell - Yes. It does have a really strong Paint/lacquer-y smell. But you are working with chemicals - so that was a given.While it cured, even though it was sticky, it was warm. I wouldn't say it was so hot i could not touch it, or get burned, but it does put off some heat. Just and FYI.I did not get any of the wrinkles or bubbles as others have claimed, but I did do a VERY thin layer, on my project,All in all, I DO NOT recommend this product for any type of crafting you plan on doing if you are looking for a quick fix to the time issue as you would with other epoxies.

I really like this product. It is a very thin resin. The main downside is in trying to open and get product out without any waste. I tried putting some of the product in a different uv resin bottle. Worked for a while but eventually it got gelled in the bottle, so don't try to go that route 😉. It is thin enough that I usually use a syringe to get it from the container it comes in. Overall a very good product for a very good price! I would like to add that this company has great customer service. I had several questions and they had the fastest responses that I have ever received from a company.

I recently bought a quart of this UV resin for using in making resin jewelry and resin casting. In short: I am unimpressed with using this product for making resin cast jewelry and charms.Problem I encountered:*Inconsistent Curing: I used all of my resin within a 48 hour time frame. The days I used it were pleasant, low humidity, and very sun. I cure my resin on the south side of my house that gets pure direct sunlight. I dealt with a lot of weird issues ranging from stuff curing quickly, to stuff after 6+ hours in direct sunlight being tacky to the touch and leaving finger prints on it. I did not use pigment or colorant in my of this resin, I was using straight resin.*Did not UV Cure In 3 Mins: I had a variety of items I cast of various sizes, from small beads to a small snow globe. The UV never once cured to the touch within 3 mins, and in some cases were tacky for 1+ hour and when I checked them I left finger prints.I do not plan on using this product again, it was too inconsistent.

I used this resin with a silicone mold of wings. I mixed some of my best friends ashes with it and gave them away with a pin back to our riding brothers for mementos. We ride with a clean and sober bike club, and he was the last original member from 1984 still active, so it was appreciated by many of our longtime club members.It worked perfectly, but I had to make the casting in three layers: first a layer thin in the mold to give a sealed surface, second mixed with some ashes, third to finish the fill and attach the pin back.

Works well but it is very stinky gives me a Headache every time I open the bottle use in a well ventilated area it takes a couple of days after curing under light to fully cure with out it being sticky other wise works great