B01B9VHZNS

Definitely a DIY project but the quality is extremely good! I used a 55w hid 5000k bulb and it is literally 3 times as bright and a lot more focused. I removed the high beam assembly wich dispersed the light a lot better. Housing that holds the bulb is cast aluminum and chromed wich is a lot better than plastic.

Very happy with these. I think most people aren't understanding that after Installation you will have to use "h1" bulb. The adapter plates for other bulb sizes is to help secure the projector lens. Not the actual replacement bulb size. Very easy to install and extremely better beam pattern then ever before. You will have to go back with " h1" so weather you just a jumper adapter or just hard wire like I did. Very great projector

At first, with an H1 bulb, with no modification, these are very spotty with an off center hot spot. I decided to correct things and ended up getting a fantastic, Lexus like, OEM cutoff and output. First thing was to sand down the surface where the bulb meets the housing. It was rough and uneven. With a little trial and error of moving the bulb up and down and side to side, you can see where you need to grind to achieve that nice, centered hotspot. Second, I personally did not like that DOT style cutoff, so I sanded it flat. My truck sits high enough that a DOT cutoff has no effect besides looking stupid. Third, I had to slightly tweak the cutoff shield to get a gorgeous intense purple/blue cutoff. Bend it slightly forward or backwards to get out crisp as well. And forth, take it all apart and clean it. In the end, a cheap projector with a little tweaking made me forget about ever spending $250 plus for a name brand projector.

Very versatile

Sadly these are pretty low quality, screws ship out easily. Needed to be modified, their 2.5 is a better buy.

Really poor quality. It took two sets to find a set of projectors with operational high beam flaps. It was a couple weeks in that I learned one projector doesn’t correctly hold the bulb so it was causing bulbs to fail. All of this with absolutely poor output. I ended up ordering the LED projectors and they have exceeded my expectations. Do not buy these.

First of all you have to use decent h1 led headlights for these to work the best and do a little of modifications to the wires at least in my case but other than that these are really great. I replaced the clear cover lenses on my headlights to have that clear look on them because they were sun ☀️ burned, It really made a difference from my stock halogen headlights and evenly distributes my lights a lot better than my reflectors ever would

Installed in my 99 E46 Fit perfectly, and working well! Metal housing, plastic basket. Optics are clear, project well, and cutoff is even. Using 55w 5k HID, much more light without blinding oncoming drivers. Haven't used the solenoid for bi-xenon function yet. Seller is top notch

Well built felt like quality. Need to wire in the high beam still but alignement turned out perfect. Installed with no shroud, no regrets I like the look.

El equipo es de calidad media a baja, eh tenido otras lupas que trabajan bastante mejor, el principal problema que veo es que se pierde mucho la luz en el material reflectivo, la lupa está mal enfocada, en otros equipos la línea de corte se ve definida y en estás se ve difusa, en las imágenes que compartí tuve que agregar un equipo auxiliar de LED, que después me causo motivo de infracción y por lo tanto los tuve que quitar, pero las lupas solas no tienen mucha penetración, el alcance si está bien, especialmente para manejar en carretera, desgraciadamente la luz es pobre, aún tomando en cuenta que use xenon de 55w en conclusión el equipo es bueno, cumple lo que promete, pero no es excelente y si se decea una iluminación para conducir en autopista no lo recomiendo

لي اكثر من اسبوعين انتظر إرجاع السلعة والحصول على المبلغ

They showed as being compatible with my E46 and were the right measurement but not a chance these would ever fit. Don't waste your money