Lutron Maestro Dual Digital Dimmer Switch Only for Incandescent Bulbs, 300-Watt/Single-Pole, MA-L3L3-AL, Almond

I recently installed the Lutron Maestro Dual Digital Dimmer Switch in my home and I am thoroughly impressed with its performance and design. The ability to control two different light sources with a single, stylish unit is a game changer. Its compatibility with incandescent bulbs up to 300 watts ensures that it works seamlessly with my existing lighting setup. The installation was straightforward, and I found the dimmer's responsiveness and range of light control to be exceptional. The sleek white design blends in perfectly with my home decor, adding a modern touch without being obtrusive. One of the standout features for me is the digital control, which provides a precise and smooth adjustment of lighting levels, unlike the older, knob-style dimmers. It's also a bonus that I can set a preferred lighting level and return to it with just a touch of a button. Overall, the Lutron Maestro Dual Dimmer Switch has exceeded my expectations and has added both convenience and a touch of sophistication to my home lighting system."

Switch works fine with one circuit going to a pendant with (3) G9 LED bulbs and the other going to (4) 14-watt recessed LED panels. It could be that my lights are providing enough resistance to the dimmer for it to operate correctly. I do not know how well it would work when used with a single bulb.Also, the switch only has a single input that feeds both dimmers. You cannot wire the dimmers to use separate circuits. This probably isn't a problem for most people but it could be if you are trying to control 2 series of lights fed by different circuits.

Was a little apprehensive about ordering a light switch of this type at this price. I had two separate light systems which I wanted to be able to dim independently. Just make sure that you are using INCANDESCENT Bulbs, as this does not work with LED lighting.But one received and installed, it works great. Once you get used to how it operates, it is a cinch to control. I can now bring the lights down to an very low setting, or just double tap the desired light, and the light goes to full brightness.Great product and worth the price if you have this specific need.

my wife was very irritated that I spent so much on a light switch (over $50)...but after a few weeks she absolutely loves it.I needed a single gang switch that would control 2 lights as I did not have the space in the wall for a double gang box.the trick was we wanted both light to be on a dimmer and we wanted something that looked nice and wouldn't stick out funny.this switch fit the bill and then some!!!!it looks great with our newly redesigned kitchen and even looks good inside the designer box cover that we bought to use throughout the kitchen. and it does not stand out from the other switches and plugs in the kitchen even though it is the only one of its kind (the other switches are actual flat designer switches I found and bought at my local "big box" hardware store).then comes all the nice things this switch does beyond what we bought it for....it has a memory of what level the light was last turned on to. so you do not have to turn the light on just to attack the dim down toggle. great because the "other" light on the switch is a decorative set of lights behind a personalized stain glass. so when we turn it on for parties and such we typically turn it on very dim to best suit the look of the stain glass (too bright and the 2 light bulbs shine through in 2 bright spots and look kind of funny).but the next feature is even better... from the off setting if you double tap the pad the switch goes to full on. great because that same stain glass light is right above our kitchen pantry and a second use was to shed light into this very dark pantry. and the best part is after you are done with the full on setting just simply tap once to turn it off, and the switch still remembers where the light was "programmed" to come on to. so another simple single tap would turn the light back on to the dimmed decorative light level!!!the main light on the switch controls the main over head central light of the kitchen. most of the time we turn it on we use the full on position but at night after the kids go to bed we like to leave it on a dimmed setting as a reminder if something in the kitchen still needs to be done (such as a pot with something stuck to it from dinner that really needs to be cleaned before bed).if I were to have just simply torn up the wall and tried to find a way to make a double gang box fit and then bought 2 nice dimmer switches to put in (which would have looked really funny because I would have had to either greatly raise or loser the box as to find room above or below the box from the dining room coming in from the backside) and also spent the little money on the new double gang box, not to mention all the time to accomplish all of this... I would have ended up spending about the same $50 amount and would have had 3 times the work to end up with something that would have not even looked, nor probably operated, even half as well as this switch.Great Decision and a Great Buy!!!

Didn't work like it was supposed to would let power trickle by and keep lights dimly on

This works great for what it is. Wanted a duplex dimmer switch to replace the standard on-off duplex switch for my two kitchen overhead lights. Installed it on a whim, despite it *not* being officially LED-compatible, and in my specific case, it works regardless.Please note that you cannot simply use these with LEDs and have it work - there must be an adequate resistive load. In my case, each of my lights have 7 LED bulbs and an approximately total of 42-50 watts, which manages to be enough to allow the older style dimmer like this to function properly. With lower load, it would likely be unable to entirely turn off the bulbs.

El producto presento muchos problemas al momento de instalar ya que se busco 5 diferente referencias de bombillos atenuadores y con ninguna fue posible evitar el parpadeo. Se daño a los pocos mese de instalados y a hoy 23/04/2024 no he podido que me responda por la garantía del producto no la marca.

Beautiful design and plate finish but unfortunately has a not so deep interior box making difficult to work with too many wires

I was apprehensive about buying this because it specifically says NOT FOR LEDs but it was the only decent single gang double dimmer I could find and other reports indicated it worked with LEDs. So I gave it a shot and was pleasantly surprised.In my case I moved into a place that has a finished basement with all 10 ceiling spotlights on a single circuit and only space for a single gang with on a pillar. I decided I wanted to split this into 2 circuits of 5 lights each. The spotlights had existing dimmable 120V 9.5W BR30 style LEDs from Phillips.First off: the switch specifically says you need more than 40W load which I had on both circuits.The switch itself is the usually high quality I've come to expect from Lutron. The switches have a nice look and feel , with a positive touch and nice indicator/Locatod LEDs to show dimmer level. A quick double tap turn lights on to max brightness (or optional preset level) or single tap off. Dimming is accomplished with a small rocker switch and the dimmer function has a nice ramp up/ramp down fade (which is also adjustable).Installation was easy, just connect the hot wire and the two loads to the screw or push terminals (note your local electrical code here!). Note only a single wire nut and 2 mounting screws are included so make sure you've got correct hardware and a cover plate. No neutral/white is required for operation. There's also a ground wire to connect to ground in the box. Speaking of box, the switch is fairly deep so a shallow box won't cut it.Once everything was connected I was pleasantly surprised to see that the dimmer indeed worked perfectly with the LEDs with smooth dimming and no hum/buzz. This might not be the case with all installs and brands/styles of bulbs, but it worked in my case.

I ordered this dimmer from Amazon a few months ago. We had it installed and immediately noticed that the switches were "sticky"; that is, that we sometimes had to press hard or press in a specific spot for it to work. However, it generally functioned, and we kept it installed and I did not return it. It was difficult to find a dual dimmer switch and I kind of figured this was as good as it was going to get for this hard-to-find item, and that I could live with the "sticky" buttons. However, I've noticed over the past couple months that it has pretty much stopped working entirely. I have rarely encountered something as frustrating as a light switch that doesn't turn the lights on or, more frustratingly, doesn't turn the lights off on the rare occasion that it actually does turn them on in the first place. It also sometimes gets stuck in an endless cycle of nonstop dimming up and down without ever actually turning off when I hit the switch, which is incredibly creepy and actually pretty stressful. Apparently I cannot initiate a return for this product on Amazon because it has been more than 30 days, but surely this light switch is defective and is supposed to have a lifespan longer than a few months?

Expensive but Would buy again.

3 out of the 4 switches I got are stillWorking but 1 of them started to glitch.

I took my chances with this product despite some of the poor reviews. Main thing to know which the instructions are upfront with is that you need a minimum 40W load for this dual dimmer to work. If you're working with your standard 14/2 wiring and using incandescent bulbs, you'll have no issues. LED's could work if your load is at least 40W. Also to keep in mind is the max load, especially if you have to remove the metal tabs on 1 side (or both sides). The more tabs you remove, the lesser the max load.