Pangda 100 Sets Grommet Eyelets Tool Kit, Grommet Setting Tool and Eyelets with Setting Tools and Storage Box for Fabric, Tarps, Curtains
J**G
Works great! If using thin fabric, see my review for instructions!
These work great if you use them right. This is a quick how-to for using with t-shirt and/or fleece material. I had a t-shirt quilt made that I wanted to hang on a wall. The cutting tool would not cut through the material. The trick is to use the cutting tool and just make an indentation where you want the grommet. They use small sharp scissors (like ones used to cut bandages or thread), poke a hole in the middle, then make four small cuts INSIDE the circle - this will give fabric for the grommet to grip to. The larger half of the grommet should go on the side of the fabric that will be facing out as this one gives a cleaner look. Poke that one through the hole, carefully stretching (but not ripping) the fabric around the grommet. Place the smaller one on the opposite side, then place the large grommet on the small metal pieces. Stick the anvil (or whatever it’s called) through the hole, give it five or six whacks with a hammer, and VOILA! Pics show each step of the process I did. Turned out awesome!
J**S
RUST bigly after just one month - avoid
The media could not be loaded. RUST RUST RUST - Dang, I am really quite angry at this point. You can NOT use these outdoors. Or probably in a bathroom or kitchen application either.I was making a three-panel awning, and I was a lot more concerned about the fabric holding up so I found sunbrella curtains on close out. It never even occurred to me to worry about grommets, I figured they were all made out of nickel plated brass or whatever. I did a lot of reading of reviews on Amazon, and these ones seem perfectly fine. Sure, the hole punch doesn’t work at all, but hey, I’ll use scissors. I was almost done with the first panel when I pulled one of the grommets out of the case and it was already rusty. ALARM BELLS start ringing in my head, like “oh crap, these things rust?!”So I went back and searched the Amazon reviews for these for the word rust, and there’s a bunch that mention that these things rest. I’m like oh no.Thank goodness that happened on the first panel. I am now a grommet expert, and can tell you you really need to find more expensive brass or nickel plated brass grommets. Stimpson is great. They’re going to cost you more. You’ll need a separate tool. You won’t need the half inch size (#4), because even though these ones are also half-inch, the real half-inch ones are way bigger, way beefier, and you’ll need a sledge hammer.Stimpson sells stainless, which I tried at first (to avoid rust), but they were so tough to set that even a sledge hammer won’t set the stainless #4’s (using a cheap-ish tool I got on amazon made by Osborne, I think the name was). I ended up with nickel plated brass #4’s for my other two panels of the awning, they are big and beautiful and holding up great. Stimpson also has amazing customer service and will answer all your questions.This cheap Amazon set is terrible. Plain steel (not stainless), equivalent in strength to much smaller real grommets. One was rusty while still in the box, and now from pics you can see how rusty they are after only one month outside, so unless you’re making a one time use project that you’ll be throwing away, pay a little more money to get brass and the corresponding tool.
D**K
Is not missing pieces! Just needs instructions
I was VERY confused at first so I went to check YouTube for help. Ended up thinking this kit was missing the bottom part of the grommet but I was wrong.I came back to read the reviews and another reviewer explains exactly how these work. Basically, you insert the grommet into the precut hole and the part that looks like a washer goes on the other side. You hammer them together until the back starts rolling in to secure the grommet.They worked like a charm for me but be ready to hammer the air out of these — especially if working with vinyl and a small hammer like I did.I have some over-the-door shoe storage and I grew tired of having to dust all the shoes. So I thought a plastic cover would be nice. See pics for result.Even though these worked really well, I have 3 stars because the kit has no instructions. Unless you’re a pro at this, chances are you will not know what to do with these and spend 15-20 min trying to figure it out — just like I and others did. I really thought about just returning them.Seller should highly consider inserting a small piece of paper with at least a diagram!
S**S
Poor Quality grommets that rust within 2 weeks!
Another reviewer commented how bad the punch tool was at cutting the holes, which I completely agree with. But for me the biggest issue is that I added grommets to 2 groundsheets that are used for hiking to put backpacks on when we stop for lunch etc to save them getting wet from damp ground . Within 2 weeks the new grommets have all got rust on them (as opposed to the existing grommets which dont have any & have been out in all weathers for 2+ years).They are obviously using cheap materials - I cannot recommend this product if you are using for any outdoor activities
M**I
Moi qui apprehendais, je suis agreablement surpris!
Bonjour à tous,Je viens de déballer mon colis il y à quelques heures.✒ - Dans l'immédiat voici mon constat à chaud (1er jour) avec mes 3 priorités:🗓-- LA LIVRAISON --🗓 :--► Commandé le 09 Livré le 10🛒-- L'ARTICLE --🛒 :--► Envelopper dans une poche plastique, les oeillets, les rondelles, le coupe trous , le pointeau et le mandrin sont en plus dans une boite assez rigide pour garder tout ca à l'abri📝-- LA NOTICE --📝 :--► Dommage il n'y a pas de notice papier--► Il m'a fallu revoir sur la de vente, les explications pour positionner l'oeillet et son anneau║▼═══════════════════════════════════▼║✒ - Voici le compte rendu au bout d'une semaine, avec les questions que je me posé avant d'acheter et les réponses après achat:1/ Pourquoi et pour qui j'ai acheté ce produit ? :--► Personnellement je m'en suis servi pour redonner une seconde vie à la grande bache de ma remorque. J'avais les deux fermetures éclair qui avait rendu l'âme.--►2/ Est ce que les photos du produit sur la fiche de vente sont elles conformes ? :--► La réponse est >> OUI.--► A 100% identique3/ Est ce que produit s'adapte à mes besoins ? :--► La réponse est >> OUI.--► Complétement! cela m'a permis enfin de fermer l'arrière de ma bâche de remorque des petits tendeurs vendu chez Amazon aussi. Silverline 237045 Lot de 10 Tendeurs à boule 175 mm 4/ Est ce que le prix de cet article est intéressant ? :--► La réponse est >> OUI--► au moment de ma recherche, Il y avait moins chère. Mais cette boite est complète et pratique.5/ Est ce que la qualité est au rendez-vous ? :--► La réponse est OUI.--► Une fois installé, les oeillets me semble bien fixés et assez solide pour résister à une fixation.--► Les oeillets ont une couleur chrome, ca fait tout de suis propre et fini6/ Est ce que j ai eu des difficultés à l'installation ? :--► La réponse est >> NON, et oui.--► Mais c'est de ma faute, j'ai voulu faire ce petit travail en un temps donné et ma précipitation, mais poussé a l'érreur!--► Alors la notice en image sur la fiche de vente explique très bien se qu'il faut faire pas à pas.--► Moi évidement au lieu de prendre une cale en bois, j'ai pris se qui la première chose que j'ai vue: un petit bloc en béton. SURTOUT A NE PAS FAIRE car après 3 à 4 trou, j'avais flingué la tige qui sert de coupes trous, cela ne coupait plus. Donc, comme si je n'avais pas assez de travail :), j'ai pris la plus petite lime que j'avais et je me suis amusé à limer doucement le rond tranchant (normalement) du "coupe trous".-----◙ Bon après cela toute est revenus dans l'ordre.-----◙ Pas besoin de frapper fort et pour trouer-----◙ Une fois le coup de main pris, ca va! c'est assez simple à mettre en place--► ah oui! Jusqu'au bout je me suis demandé comment j'allais les enlever si je me tromper de sens, et bien ça a l'air assez simple: en prenant un petit tournevis plat et en essayant de déformer l'anneau qui se trouve à l'arrière, et hop il s'en va!7/ Est ce que le produit est identique à l'original, du produit remplacé ou se rapproche t'il de grande marque connue ? :--► La réponse est >> NON.--► Au lieu d'avoir une fermeture éclair j'ai choisi cette solution pour son coup et pour la mise en place des oeillets. Parce que la couture c'est pas mon fort :)8/ Est ce que je conseillerai ou rachèterai ce produit ?--► La réponse est >> OUI.--► Pour tout ceux qui désire mettre des points d'accroches sans trop de casse tête, oui je leurs conseillerais ce produit.9/ Pourquoi ma note ? :---► Je donne un 5 étoiles :------◙ Le prix est compétitif.------◙ La livraison à été rapide , merci "PRIME".------◙ La qualité au premier essai à été convaincant------◙ La mise en place du produit est facilité par les petits outils fournis.║▼═══════════════════════════════════▼║😃- Ce que j'ai aimé -😃 :------► Fermer enfin ma bache avec un produit qui ne paie pas de mine, mais qui est très pratique.🙃- Ce que j'ai moins apprécié -🙃 :------► ma précipitation et mon empressement a finir rapidement ce que je n'ai pas encore commencé ;) bein oui! il fallait que je râle ici.║▼═══════════════════════════════════▼║🤓 - Comme j'adore faire mon contrôleur de marchandise sans contraintes ni pressions 😁 , et pour que se soit utile pour tout le monde, parce que, pour être franc avec toi, quand j'achète un produit sur Amazon je regarde le prix , mais je regarde avant tout les commentaires.DONC!Pour que mes commentaires soit le plus complet possible, je reviendrai redonner une évaluation dans un peu plus de 6 mois 😉 , pour faire à nouveau le point sur la qualité.║▼═══════════════════════════════════▼║👉 -- Etes vraiment intéressé sur mon retour d'expérience ?👉 -- Avez vous apprécié ma petite contribution ?👉 -- Si vous voulez me remercier du temps passé à rédiger mon compte rendu, Faite un clic sur >> OUI << ou >> NON << à la question en bas mon commentaire.😁 - Cela me donnera l'envie de revenir vous donner le reste de mon test ou de mon retour d'expérience.Merci à toi de m'avoir lu jusqu'au bout🤔 - Si vous avez des questions n'hésitez pas, pour que ce soit utile à tout le monde posez votre question en dessous de mon commentaire et j'espère que j'aurai un rappel sur ma boîte mailà bientôt et bon achat à tous.Que le meilleur produit soit pour toi.😁 Silverline 237045 Lot de 10 Tendeurs à boule 175 mm
P**S
Set is great apart from blunt “safety” punch
Very happy with this set (10mm - 2/5”), and worked for my requirements.Setting tool is very easy to use and sets eyelets easily and neatlyOnly downside is that the hole punch is pretty much useless and blunt, even on a sandwich of two layers of ripstop nylon which contain backing cotton for the eyelet to grip onto. Seems to be similar with all makes of eyelet sets where the punches are more like a safety one - certainly won’t damage anything with it :(Luckily have better punches which I used and job completed easily.
S**M
The piece that cuts through the material isnt sharp as ...
The piece that cuts through the material isnt sharp as all, so all it did for me was to make a circle mark that i had to use something else to cut out the hole out- i didnt buy it to do that.There are lots of grommet pieces in the pack, not very thick but lots of them. If i had known about how rubbish the cutting part was, i wouldnt buy again.
D**N
Experiment of an old bit of cloth
These do the job well. But what I would say is that you don't get instructions. So print off the image set from the sales page. ANd also get a small bit of cloth to practice on, so you learn the technique.For example, the images don't show clearly whih way up to put the second 'washer-like' ring. It worked best for me bedded in to match the main ring.But the missing star is not for the lack of instructions, but because the cutter punch just doesn't cut the fabric I used.. At all. It's just cotton. I used scissors, which worked well. But far more time consuming.
Trustpilot
1 week ago
4 days ago