POR-15 49216 U.S. Standard Tank Sealer - 8 fl. oz.

Received 4 days early before delivery date Thank You Klamp, used POR - 15 for RE TB 350x it took 3 to 4 days to dry completely. Fuel tank from RE does not coat anti rust from inside so it gets rusty because of ethanol mixed with petrol. But keep everything ready before opening the can.

Expensive However its a very good product. Very satisfied withthecoating it did for my Yamaha RD 350 petrol tank

This tank sealer is a life saver for the bike's fuel tank, a few months ago my 20yr old bike's fuel tank started developing pin holes & leaking petrol. I got the entire tank first welded & sealed properly & cleaned it from the inside out. I had painted the new tank & once it arrived I poured the entire POR15 inside the tank & made sure the paint touches every part of the tank on the inside surface. The tank was then put to rest for the next 48hrs & WOW ! The results were amazing.. Luv this product.

N

Product was nice , I received new and fresh product but it's been delayed I received overall nice , thanks to the seller global klamp

Nice product

The day I received this product, I used it within an hour. After pouring almost half of it, found lumps, layers. Which means the product was a faulty/old one. But now my 28year old motorcycle gas tank is ruined. Because the chemical has been poured in the tank and it cannot be undone. I had asked for a competition for my ruined tank. The company has refused. Now I have to buy a new gas tank. So becareful, when ordering this product. You do not know what you will get, and the damage will be irreplaceable.

I've used POR-15 stuff in the past and was impressed. This tank sealer follows the same trend. I have a Coleman naphtha stove fuel tank I was rebuilding because the liner let go. Stripped the old liner out, washed it, used the POR-15 metal prep and then this POR-15 tank liner. It's held up to naphtha fuel and now this tank should last another 40 years easy. Follow the instructions, degrease the tank, metal prep and you'll be set. Definitely recommend this stuff.

Excellent quality and good timing to recommend your items

POR15 products need no introducing . This can easily did my 2 gallon Motocycle tank, you'll need to strip and fully de rust the tank first or IT WON'T WORK . Needs serious mixing, the bottom of the can was the separated out part, I tried shaking it a while to no avail so I used an old CLEAN large flat bladed screwdriver to slowly turn and turn it until the colors were fully mixed, takes a goodly long while . Once opened the stuff needs to be used soon so DO NOT OPEN THE CAN UNTIL THE TANK IS DE RUSTED AND YOU'RE READY . I used a medium sized plastic funnel to pour it in then I capped the tank and began rotating it to ensure the mix flows into every corner and crevice ~ this is not a job you can rush . After making sure it had fully coated the inside of the tank I cleaned up the stirring screwdriver and funnel, it's easy to do if the stuff is still wet, once it dries it's *PERMANENT* so watch there you're working as it WILL NOT COME OFF EVER . floor, driveway, clothes, etc. . if the tank you're working on has any pinholes, be sure to tape them up first, this stuff is amazing and plugs BB sized pin holes easily . Don't forget to follow the instructions to the letter and remember to keep tuning and tipping the tank so the mix covers all crevices and the inside of the top too . I polish then wax the tank first so any droplets I might spill are easy to wipe off right away . I also tape around the filler neck with blue painter's tape because I'm extra cautious . I used this product in a 'Hail Mary' to save a 40 year old badly rusted and leaky Motocycle tank, I hope in time I'll find another but fr now it works fine, the ethanol laced fuel doesn't seem to bother it . I imagine I could have done up to a 5 gallon tank . -Nate

I used this on my Honda 125M 3 wheeler gas tank. I read a lot of reviews and decided this was my best option. This tank was rusted badly on the inside. I used Evapo Rust to clean the tank and it took 10 days and the results were awesome. The tank did develop a few very, very, very small minor leaks (the rust removal of the seams at the lower of the tank caused this) half way through the cleaning process. Don’t worry about the flash rust, it actually helps the POR 15 stick to it better. Take your time and make sure the tank is 100%completely dry, if it isn’t your wasting your time. I waited 5 days. This stuff will stain and get all over so be careful. I put painters masking tape all over the tank to protect it which also plugged the small holes where it was leaking ( they were so small and I couldn’t exactly tell where it was leaking from). If your going to do it right it’s a minimum 3 hour process. Add a few table spoons of POR 15 and start moving it around. Tip it upside down, wait 15 minutes, then tip it to its side, then the other. It’s a painstaking slow process. When it’s acting like you need more add another table spoon. It doesn’t take much. I ordered a 8 oz can and maybe used 3 oz. the directions on the can are the minimum directions. Be sure to look online and get the full installation manual . After I did mine I wanted to add more but didn’t want to put to much in. Afterwards I found the additional instructions online and I would of added more POR15 after the 3 hour process when it was still tacky. Regardless, it’s been 4 months and it looks like a brand new tank on the inside and there’s no leaks. The stuff is the real deal if you follow the directions and take your time. Please also consider I did my tank in February with very low humidity. Evapo Rust is also awesome. Well worth the money and buy enough to fill you tank completely, will definitely speed up the process. Unfortunately I didn’t take a before pictures. The 2nd picture is after the cleaning and you can see the flash rust.

Used to seal 69 Suzuki motorcycle fuel tank and 20 year old generator fuel tank. Several years after sealing and no problems.