Screen Replacement For Fitbit Charge 2, Replacement Watch Cover Main Screen LCD Display Mid Frame Heart Rate Bottom Case Replacement Compatible with Fitbit Charge 2

My charge 2 was badly cracked but still worked perfectly. I popped the old cover of with a scalpel blade, and the new one slotted straight in place. Tom no more than 3 minutes and my Fitbit looks brand new again.

Excellent replacement screen for the Fitbit charge 2.Good quality screen and comes fitted with the small seal around the screen so that there is no need to use glue to seal the screen as suggested in some videos. Easy to fit though getting the old screen out without damaging the LCD display requires some patience. Ensure the display is still working before removing the old screen and fitting the new screen.Have replaced the screen successfully on two fitbits using screens from this supplier. Very pleased.

I ended up with a fitbit that wouldn't light up as the LCD tail that was on the old screen, wasn't there on the new one. I've had to throw it out and I'm not happy at all. It only needed a replacement screen. So angry. I watched youtube videos but they were for different ones and nobody mentioned glue either. It's gone now so total waste of money so angry😡

The product came in a protective carton and with a protective film on the outer face. However, it did appear to have some slight marks on the inside surface, although these are not visible now it is fitted. The screen is an exact fit for the Fitbit Charge 2. It arrived promptly and I was able to replace the part quickly with the help of an online video and the recommended tools.

Great replacement for a broken screen.However, if you're replacing your screen then make sure you do it correctly.First, prise the old cover off, starting at the top right corner (the top being the top of the display when it's the correct orientation with the button on the left. If you've flipped your display for it to go on your right arm and have the button on the right, then it'll be the bottom left corner of the display if the writing is upright). Once you've prised the top right corner away, you should be able to work your way around the top until the whole screen pops off.VERY IMPORTANT. I'VE SEEN MANY REVIEWS SAYING THEIR FITBIT DOESN'T WORK AFTER REPLACING. ONE SAYING THE CABLE WAS ATTACHED TO THE BOTTOM OF THE SCREEN THEY TOOK OFF AND THE NEW ONE DIDN'T HAVE THE CABLE. YOU ARE REPLACING THE LCD COVER. NOT THE LCD ITSELF. IF THE CABLE BREAKS OFF AT THE BOTTOM, YOUR FITBIT WON'T WORK. The LCD screen is separate to the case but it will be stuck to the back of the case when you open it up and you'll see the cable still attached to the watch at the bottom. You then need to push the face in with your thumbs to try get the LCD screen out from the middle. Be very careful as you do this otherwise you could damage the cable if you try pulling on the screen or cable instead.Once you've separated the screen from the LCD, put the LCD into the middle of the new screen and then pop it back onto the face of the watch.Follow these instructions carefully to ensure you don't end up with a damaged Fitbit.

I liked that it arrived next day and was easy to change and did the job, however I'm unhappy about the quality of the top lacquer. It broke away instantly revealing a scuffed and damaged surface ( photo) and therefore does not warrant the primeium price tag. I'll be able to prepare the surface and re-lacquer. buyer beware.

Great fitted perfectly, looks just like new

A perfect fit replacement screen for my original cracked Fitbit Charge 2 screen.My Fitbit looks brand new again.Happy customer. 👍

Easy to install ,The only issue it’s the reverse sticker!!!I saw on the reviews where this problem of cracked screen seams to be a default from FitbitMaybe Fitbit will return the money and the time lost or spending on the repair!!!

Prodotto inutilizzabile, dalla foto si vede il motivo. Sarebbe bene che il venditore controllasse lo stato del prodotto prima di spedirlo al cliente. Non consigliato

FitBit states that the screen on a Charge 2 cannot be replaced. Not true. With a new screen, a tube of B-7000 adhesive, the correct tool to remove the broken screen (which I already had), and an informative YouTube video, I was able to replace the screen in less than 10 minutes.

The original screen had cracked without any external impact and was due for a replacement.The replacement came with ZERO instruction, which was a pity, so YouTube to the rescue!Further to this the sticker was upside down which could've caused trouble.The videos in YouTube all displayed the LCD already being separated from the glass itself, which left me stranded for a bit. A broken LCD would have been the end of the repair.The spare part revealed how to proceed. The already installed adhesive pointed towards a similar installation on the original. A few delicate twists with a tiny flat screwdriver inserted at the lower part of the LCD casing next to the flat ribbon cable separated the LCD from glass itself. Reverse of the tear down and a bit of fiddling the ribbon cable in the connector gave a perfect result.I'm over the moon to be able to give a second lease of life to my wife's treasured Fitbit.

Perfecto