KegWorks3U-OTPE-R5AP Air Line Jumper 5" with Screw Clamps

Not sure if the tubing was the wrong size or if my regulator and Corney keg connections were both the wrong size, but this hose fit very loosely, although they were all supposed to be the same size. I bought everything on Amazon and the ID of this hose was the same as the CO2 connections to my keg and the connections on my regulator. Another reviewer reported that the hose fit too tightly, so I'm not sure what the deal is. Anyway, after tightening the included screw clamps, everything turned out fine. Although, I had to use a vice grip on the screws on the clamps to get enough leverage to tighten them enough to stop the CO2 from leaking - a screw driver did not cut it. In the end, they worked for what I needed them for, although the inside diameter of the hosing might be a little bit off - I find it hard to believe that both my regulator and connection to the keg were both too small. More likely, the hose was too large. But, like I said, it worked, so I can't complain too much.

Got this from Home Brew Stuff thru Amazon. Not the color shown, but that is imaterial to problem. I wanted to hook up my counter pressure bottler with it. Found that the gas line to the ball lock was oversized to the extent that the clamps supplied could not tighten down on the barb. The clamps reached the stop before the tubing was snugged. I spent a half hour or so trying to explain the situation to a HBS rep and went around and around with him without success. I left him with my e=mail address to contact me when he found a way to resolve the problem. That was two days ago and haven't heard from him yet.I do see that others have made the tubing fit with the supplied clamps, but I am concerned that this is not a proper solution. Might add that I bought a two outlet manifold along with this order. It should have been apparent that the inlet barb on the manifold was small compared to the inside diameter of the red hose.

seems good quality definitely rated for specified psi... was red with psi rating printed in black and not strictly food grade (doesn't have it printed on the side). It must have been new tubing because it smelled strongly of plastic to the point that the co2 ruined the drink; however, with a little washing, packing with baking soda (dry) and leaving for few days to a week the smell was reduced to almost nothing.

Only comes with one clamp, not two. Expect to have to order more clamps because of poor quality control in shipping.

I got this tube to connect the keg to the co2 tank regulator. It fit really tightly to the co2 regulator I got. I had to clamp it down more to the keg end once I opened up the co2 tank. Check out my other reviews to see the other pieces I ordered online to get the co2 gas feed together for a 5 gallon cornelius keg.

White hose was shown and Red one sent. Maybe a little picky but I wanted the color shown. I did not return item as it will work but, i did kick it back a star.

The hose I received was red in color and not clear. But it works well to connect my CO2 regulator to the ball lock valve on my homemade carbonator.

I made my own beverage carbonator, like the soda stream. Search around you can find tutorials. This was a key component.