Tyger Auto T3 Soft Tri-Fold Truck Bed Tonneau Cover Compatible with 2007-2013 Chevy Silverado / GMC Sierra 1500; 2007-2014 2500 HD 3500 HD | Fleetside 6'6" Bed (78") | TG-BC3C1004 , Black

This is a great product. I've had this on my 2015 Chevy Silverado for a little over a month now. I purchased the Tri-Fold model. The Tonneau Cover was very well packaged to guard against shipping damage, including sheets of foam where the item contacts itself to prevent damage from rubbing. It was in immaculate condition out of the box. It arrived in its storage bag, which is included in case you need to remove it for hauling items that don't fit below the side rails. The storage bag itself seems well made, but I haven't needed to use it yet. Installation was very easy. It clamps easily at the forward end with hand tightening clamps and a pair of safety clamps. The aft end of the Tonneau Cover is secured with two lever operated clamps that can be easily adjusted for a perfect fit. It comes with foam pieces to use at these clamping spots to protect the truck's finish. The Tonneau Cover has a slight bow forward and aft so that it seals on the side rails tightly. It is a one-person, tool-free installation. Do take some extra time to center it up, though. The fit and look are awesome. There is an ample amount of self adhesive foam strips included for extra waterproofing, which I did not wind up using. I have a spray in bed liner that comes over the rails and the fit of the Tonneau Cover, which has rubber seals along all the edges, was sufficient to provide a watertight seal. There was some water ingress during one heavy rain but it wasn't because of the Tonneau Cover. The bed of my truck at the forward upper corners and around the tailgate allowed that. You could probably seal those places with the provided foam, but it was slight enough I didn't worry about it, and I wanted the bed to have that minimal airflow.. I went on a week long camping trip with my wife and two of my grandsons. All of our stuff was able to be stored in the bed of the truck under the Tonneau Cover. With some cheap plastic bins, just to keep items off the floor of the truck bed, I didn't have to worry about any water damage. I can't say enough good things about this product's looks and performance. I'm thinking about buying another pickup just so I can get another one of these...

A friend found this product online and I helped install it. Installing was very simple. I liked it so much I purchased one. You can not go wrong with the price. I have seen many of these tri folds that do not take a frame and just did not want to pull the trigger on getting one. But at the price of this one you can not go wrong. There is no lock but that does not matter to me, I got it to close in bed and keep stuff dry. Besides a thief is a thief and locks only keep honest people honest. Mine came in on Friday and took about 5 minute to install. (Second one I have done) The wife and I where going on a 5 hour drive to Knoxville TN for the weekend. Did not plan on taking my truck but found bad ball joints on her Tahoe. So I got to take my truck. On the way there we folded the cover and locked it opened this allowed us to stick our bicycles in with the front tires hanging over the tail gate. Stuck some luggage under the front where it was folded … 80 MPH no issues. On the way home I decided to take the front wheels off the bikes and lay them down. This allowed us to close the cover completely and have the bed covered while we stopped and did some shopping. (She wants a new knife) Pocket knife. Did great. On the way home with the cover down I can tell you it did fine at a sustained speed of 75 to 90 mph... It rained heavy over night last night and everything in the bed was dry. Oh yea we locked the bikes to the bed of truck ,,, I mean after all …. It is a vinyl cover , but a bad ass one...… I am a professional mechanic and own a auto repair + truck repair shop...… THIS IS A GREAT PRODUCT >>>>>>> BUY IT

Love these tri-fold vinyl bed covers. Easy install, look good, provide protection, some security. Have used several Tyger Auto products and am very satisfied. Quality products at reasonable price points. The bed cover attaches to the truck bed inner lip at the four corners. The clamps fit over both drop in shells and spray on liners. The two rearward fasteners are adjustable for tightness but do not over tighten or you'll have a hard time trying to get it off the rail when folding back. You get a length of weather stripping for use along the box edge located below the rear window of cab. Some trucks have a gap there with the cover installed which the stripping will seal. Sturdy metal bars run the width of all three fold sections offering support and to hold shape. Two nylon straps with locking clips hold the unit in place when driving while opened. Mine has withstood the beating sun and zero degree winter temps without cracking or fading. Unknown how many years this will hold true but so far so good. I have gone through the car wash with the unit closed and no issues. Main reason I like this thing is it keeps the snow from filling up the bed in winter. It also does provide some aerodynamics although gas mileage is minimally impacted IMO. With the tail gate locked nobody has access to items you may have stored. The only real drawback to the cheaper vinyl covers is anyone with a box cutter or knife could defeat it, but that's likely a rare occurrence. That said I wouldn't leave thousands of dollars in equipment stored with this version; at that point I'd be getting the hard shell cover. For the price and purpose you can't beat these covers.

Been looking at a bed cover for my truck for a while. Finally pulled the trigger and bought this one after doing my homework. My first impression when unboxing was that there was no way that this product was only $250 (with tax). It feels very sturdy and looks very nice. It took me about 45 minutes to install (mainly because I’m OCD and had to make sure it was 100% straight). I could of done it by myself but my wonderful fiancée wanted to help, so together we tackled the project. Instructions are very easy to follow and it includes everything you need. There are no tools necessary, besides maybe a knife to open the box. Once I got it on and latched down I attempted to pull up on the cover, and it didn’t move an inch. If you have a locking tailgate, the only way to get into the bed would be to cut the leather on top if someone was trying to break in. It seals up great, but also includes weather stripping if you have any gaps. One for the bulk head and one for the tailgate (mine seals up perfect on the tailgate so I used both pieces at the bulkhead. Overall, the product looks GREAT and functions just as well. Plus, they advertise it with a lifetime warranty. I’m not sure how customer service will be if I ever have to warranty the product, but with as sturdy as it is, I do not think I will ever have to warranty it. If you’re looking into getting one of these, I would say go ahead. You will not be disappointed. My truck is a 2015 Silverado Crew Cab Rally 2 edition with a 5.8 bed.

Excellent! Looks great and fits exact it fits nice and snug. Even came with a storage bag. Took me less than 30 minutes to install without instructions. Maybe the hardest part of installing it, would be making sure it was even on all sides (2004 chevy silverado 1500)

UPDATE** 6 Months in and I still really like this cover. Still looks good. Still tight. Still dry. No complaints at all. I was hesitant to get a tonneau cover for my truck if it wasn't a hard shell. After a lot of thought and research, review reading, etc I went with this one. I like the idea of a hard shell cover, but after using one on a friends truck found that they are a real pain in the rear. My biggest problem with hard covers is that you can't do anything with your bed when it's on unless the cargo fits underneath. I REALLY like being able to use my truck bed and I HATE the idea of having to take the cover on and off all the time. I bought this one thinking that I could open it when I needed to and close it when I wanted. This fits the bill perfectly. I've seen a lot of roll up covers that look like trash after a year or two. I saw the pictures of this one after prolonged use and it still looked good. I can see why when I installed it. Installation was super easy, the canvas is tight, the supports are bowed JUST enough to shed water and not collect it, and it keeps the bed dry. RIght after installing it rain started for 3 days. It rained off and on and rained hard multiple times. I went to check the bed thinking it would for sure have water in it. Nope, the bed was dry as could be. Very happy about that. I've had it on the highway 70-80mph and it hasn't come loose. There doesn't seem to be any play in the cam locks and I don't see them releasing on accident. The seals mate well at the tri folds, it's easy to fold up and down, taking it on and off is super easy. Overall I'm VERY happy with this tonneau cover and would definitely buy it again. I'll update if anything changes.

Extremely good quality especially for the price, very easy and straightforward instructions. Got an airtight seal, with the provided weather stripping. Fits 90s OBS Chevy trucks, put this on a 98 ext cab. Defs recommend.

I'm going to start out negative because when I opened the package and found a paper telling me to rate the cover at 5 stars to help promote the product. I'm sorry thats not why I rate stuff. Ok lets get past that. I love this cover and YES it fits a 2017 Silverado 1500 with a 6.5 bed. On the Amazon page it states it does not. Its easy to install 20min without help and it seems to be made well. I was surprised after 2 inches of rain and a 60mph thunderstorm yesterday it was bone dry inside. I have not drove though heavy rain yet but I've had no leaks on wet roads so far. It fits well on the sides and at the back corners. I've seen some that just don't fit the weird curved lines of this new Chevy bed. Only minimal flap noted at highway speeds. The clamps go on easy and hold well. It comes with foam tape that seals the slight difference at the front of the bed and the bed rails. The only problem cosmetically is wrinkle areas at the folds of the cover. I hoped with time they would disappear but looking at other folding covers I think it is the nature of the beast. The storage bag is cheap made but useable. The light that comes with this is a joke but thats not worth effecting the rating. Bottom line this is the best cover I have seen for even twice the money.

This cover has far surpassed my expectations. I was nervous that it would look cheap or be cheaply made based on the price. Couldn’t be more wrong. This cover is as heavy duty as any other soft cover I have seen. The material feels rugged and looks amazing. Fabric is stretched perfectly tight. The lever style clamps hold far tighter than my previous spring loaded clamps. Keeps everything dry through a touchless car wash. Nice and stable at high speeds. Easy install. Extra weather stripping just in case, but you probably won’t need it. I didn’t use it. No issues. The cross bars are bent upwards in the middle the slightest bit. Not enough to notice by looking at. But gives a little more clearance in the bed. Half inch or so. Great product. Even if it was $700. Highly recommended.

I was leary to place the order as I wasn't sure of the quality or fit. My cover arrived quickly and fit perfectly, very easy to install. I was also impressed with the quality. I'm quite happy with my purchase.

This thing fit perfectly only took a few minutes to install&looks great... It was also the best price that I could find.

El producto llegó en dos días, y llegó en perfectas condiciones, muy buena calidad.

Edit: Just doing a follow up review. I am still very happy with this cover, so much that I’ve convinced 2 other people I work with to buy one of these over the bigger brand names. This cover has survived 2 harsh Alberta winters now with constant use and still looks as it did new. It’s seen a lot of highway miles, folded up (not recommended by manufacturer) and down, in every weather condition you can think of and it’s still nice and dry inside when you open the tailgate. The only thing it will let in is a little dust! Super pleased and would buy another, although I’m not sure I’ll need to! Arrived quickly, packaged well, and materials seem to be quality. I’ve been looking for a tonneau cover for quite some time and couldn’t justify paying for the bigger brand names. I would recommend this cover to anyone. From the time I unpackaged it to the time I was finished installing took all of 10min. Fits well although I’ve seen other tonneau covers that fit the “contour” of the box better but those are $800 or more. Comes with more than enough add on weatherstripping and even a battery powered magnetic light. The light isn’t the greatest but I was unaware that it would come with one so that’s a plus. It folds tight in its locked position and seems to seal well. I really don’t have any complaints to speak of. Seems that it will last, time will tell. Tyger states it has a 10 year warranty on manufacturing and material defects. I had originally planned on getting a roll up cover as I haul my atv often and didn’t want to be taking a cover on and off all the time. I’m glad I went this route as I can have it off in 2 minutes and back on in 5min, plus I won’t have the ugly Velcro rails that the roll up uses. I don’t think you can beat this for the money. All in all very happy with this purchase.