National Lighting IP44 Rated Triangular Bollard Light Outdoor Driveway Patio Mains LED Bollard Lights, Brushed Stainless Steel Finish Lamp Post 500mm, 9W 240V LED ES E27 (Not Included)

So bought these as the previous nights were so old and crap they don’t work. They were easy to fit but had a small challenge with on of the screws but used one of my own. Problem solved. They look great but the challenges isnt them its the bulbs, they are a very narrow type specific in size

I don’t do many reviews but felt I should for this... this bollard light is amazing quality. The steel is top notch... solidly built... wiring connection... everything. They are a genuine steal for the price. And they look great. Highly recommended.

Was easy to install, is solid after install, gives good light with the LED bulb I'm using. After a few months outside still zero rust or tarnishing on the finish which is the main thing I was worried about

Earthing wires not connected. Retained studs sheared. Easily fixed (keen DIY'er) but not as should have been out of the box.

These bollards look fantastic. The brushed steel finish is sleek and triangular design adds the finishing touch. They come in two sizes (500mm and 800mm tall) which was perfect for my situation. However the IP44 box supplied is two port (power in and power to lamp) which will not work if you are fitting more than one light. For a series of lights you need a three port connector (power in, power out to next light, power to lamp). None of the three port connectors I could find on the net would fit the internal dimensions of the bollard as they are usually fairly large. I think the manufacturer should make it clear that the IP44 connector is two way. Once the connector is removed the cable is rather short. Two inches more would help the install. Finally the screw holes are a few mm away from the bollard making it impossible to use an electric drill. Even using a manual screwdriver is difficult and I was forced to use a right angle driver to finish screwing them down. Very, very carefully as the screws are fairly soft and easy to strip. Finally the screws are 50mm and require a 40mm hole which in my case was into paving slabs/monoblock. 50mm screws overkill I felt. Overall 5 stars for look but a few changes by manufacturer would make them less difficult to install. Having said all that they look great now!

Absolutely stunning 800high brushed stainless steel finished garden lighting bollards. They are almost too good to be true for the price , however I cam confirm that they are as good as they look and cannot recommend them enough. Ordered through the National Lighting company online and most definitely recommend this project

We ordered a couple of the 800mm size bollards to go either side of the front edge of our new decking. To be honest, we weren't expecting much for the money so imagine our surprise and delight when we opened the first box and found a well made, good looking bollard. And to add to our delight, we found they weren't round but 3 sided. The heads were secured by very small chrome dome nuts and were just a bit fiddly for our ancient fingers but we still managed to get them undone. We had a couple of E27 GLS size LED lamps which just fitted perfectly into the opal sleeve although I feel a clear sleeve would be better for light transmission, but that is a minor point. So if you want a good looking, well made bollard for your patio/path/or drive. Then look no further.

I fitted this for a neighbour (I reversed over the one that was already there.. oops) and it took minutes. Cannot speak for the motion detector as I have not noticed, and as for brightness, there was no bulb and I supplied that.