Patio Door Handle Set + Mortise Lock 45° Perfect Replacement for Sliding Glass Door Fits 3-15/16” Screw Hole Spacing, Non-keyed with Latch Locks,White Diecast,Reversible Design(Non-Handed)

As a DIYer, the door handle set has been a perfect replacement for my sliding glass door. The 45° latch lock fits seamlessly, and the 3-15/16” screw hole spacing aligns perfectly with my existing door setup. The white diecast finish looks sleek and matches well with the door, enhancing its overall appearance. One of the standout features is the reversible design, which makes it easy to install regardless of the door's orientation. The non-keyed latch lock provides secure and smooth operation, making the door feel brand new. The handle set is sturdy and feels solid in hand, offering both functionality and durability. The only minor downside is that the installation instructions could be a bit more detailed, but with some DIY experience, the process was still manageable. Overall, this is an excellent choice for anyone looking to upgrade or replace their sliding glass door handle. Its quality construction, ease of installation, and attractive design make it a highly recommended product.

For me, this hardware fits well with the Ply Gem (or American Craftsmen) patio sliding doors that come with blinds in between the glass. I purchased my patio sliding doors at Home Depot. So if you have a similar type of patio door, know that this product most likely is a standard fit for replacing your patio door hardware. I accidentally broke my old latch and mortise lock mechanism. So I purchased this hardware kit that comes with indoor handle, outdoor handle, latch, mortise lock, and screws of different lengths depending on your door. I successfully installed this product to my patio door DIY. Very easy, no need to overpay handyman. There is a YouTube video that teaches you how to install this type of hardware. The only word of advice is to be careful with getting the mortise lock into the frame because if you are not careful, the mortise lock can fall into the frame and then getting it out can be a hassle. A DIY YouTube video showed a reliable trick where you can use pliers to grip the latch while inserting the mortise lock into the frame without risk of falling into the frame. After, you screw the mortise lock and secure it. The handles and latch are a straightforward install. The white color of the product is the same as my patio door frame and the handle is very sturdy, very nice built for the value. Easy 5 stars. Also, nice touch with the product demo video using Eyes On Me song, as a Final Fantasy VIII fan, I approve!

Great easy to install.

Very easy to install and work perfectly!

Fits great replacing original 1997 installed handle. The lock is smooth, upgraded locking feel vs original. Looks good on the door. Install took less than 10 minutes with just a Phillips #2 bit. I also used a pair of needles pliers to hold the mechanism in place while threading the screws thu the handle. Good value for the money, I might get a second for downstairs. I purchased to replace the original builder grade handle on my house built in 1997, works perfect. While it isn't high end I do think it is an upgrade, for ND finish are good for the price.

Our handle was broken and hard to closed. This was an easy install and works look newz

Perfect! What wasn’t perfect were the holes in the vinyl door. A small amount of drilling and viola! Perfect fit and a great price. Measure carefully before ordering.

This product is extremely difficult to install due to several reasons as followed: 1. See the two alignment nipples on the handle in pic 1? Those nipples are too long, and also a bit too big in diameter due to the thick coat of baked-on paint. To make it work, you need to grind down the nipples a little and scrap off the paint ( or enlarge existing holes in your door frame). Unless you are handy and have the tools, correct size drill bits and a grinder and/ or assortment of files, this product will not work for you. 2. Refer to picture 2. These screws are way too short to hold with your fingers to install. If you don't have magnetic screw drivers, these screws will not work for you. May be you have an 8 year old with good eyes and small hands to help you? 3. The latching assembly ( the piece with the hooking latch, pic 3) is just a tad too thick. To make it work, you will need to enlarge the slot in your patio door, so that when you tighten down the hold-down screws, the assembly will be flush. Otherwise the striker (hook) will not come out far enough to engage the latch (installed into the wall studs of the door opening). Again you will need an assortment of filing tools. 4. The adjustment screw is not long enough. I max'ed out the adjustment screw on mine to make it work. Although this is not solely the manufacture's fault, they could design their product to accommodate for lack of perfect square in the actual patio door as a result of the house settling down over time, etc. 5. Overall, it feels like the product is designed and made by people who have no ideal how it will be used in real life situation. Or, perhaps the manufacturer do not have the machine tools in their factory to hold down the manufacturing tolerances needed. Or, they have no idea of dimensional tolerance is. Or they just don't care. However, the product DOES look good and clean in pictures. I don't recommend it unless you are handy and have the time. I t took me well over an hour for what should be a 15 minute job. 6. With all the extra work I had to do to install this product, I'd say it is worth about $8.

My kids broke my original handle. After shopping around I found this handle set, that fit my previous door handle. Therefore the installation was pretty easy. I didn't have to create new holes in my patio door to make it fit. My 3 kids (age 4/5/7 year old ) are pretty rough with doors in general and after 3 weeks, I can tell the handle is robust. The only thing that I can say is the look that could look a little bit more premium, but it's good enough, in fact nobody can tell that this new handle is not the original one.

The handle assy works well but the lock seemed lightweight

The bolts that hold the unit together were too big and de threaded the reciever hole. Now its unable to secure together... poor quality

Perfect fit for my sliding glass door. Could not find at large or small hardware stores. I installed the opposite way to instructions and find its easier to open the heavy doe and better for having curtains.

It was exactly as stated in description and easy to install as a replacement for the one that was broken. Lock works great . Wished it was a bit cheaper for what you get.