SEYMOUR 620-1415 Industrial MRO High Solids Spray Paint, Gloss Black , 16 Ounce (Pack of 1)

Excellent DIY solution for bumpers, mirrors, and quick touch-ups. Offers good coverage and gloss, especially if high-quality clear coat is used. It is crucial to identify the car's color code to avoid shade differences.

This review is for the primer as well as the Seymour black MRO paint I used. This is a QUALITY product. It's a bit higher in price, and the high solids mean you have to spend more time shaking the can (and shaking, and shaking), but the difference between Seymour and typical Big Box Store spray paints is more than worth it. The thickness makes it much easier to use (a lot less dripping, like basically none), and the results are far superior.

Love this company. My photos are of the dark green color atop the primer. I use it on cast iron and also on this old rusty bench I picked up at the dump. The primer levels pretty freakin smooth. As does the paint enamel. Yes it takes a while to dry, be patient. I’m in the south so I paint it in the evening outside to let it dry overnight, then let it cure in the blasting hot sun all day. It sets hard as a rock. The primer & paint in the can does go a long way, thankfully, and didn’t get clogged. Nice even spray. Adhesion was fantastic. Everything I repainted was either an antique or rusty, and while I did spray the metal with the power washer before hand to remove loose old paint chips & dirt, but I didn’t sand smooth or anything like that. I don’t mind texture on antique cast iron. My intention for buying this paint was protection & durability. And this company provides both of those things. I really am enjoying the dark green paint color. It dries a little darker than when initially wet. Both pictures I posted are the same dark green color, the bench is in direct sun, the porch posts I’m making into an arbor is in the shade when I took the photo. It is lively, elegant, and to me has more appeal than black- Especially on outdoor metal

This Seymour MRO is good paint, it's not as spectacular as i was expecting it to be. Coverage is good but not excellent, better than a rustoleum industrial can though. The finish is smooth and is really helped by some polish after it fully cures. The worst part about this can is the spray tip, it sprays a decent fan, but is stiff and uncomfortable as all heck. Swapping tips or using one of those 'paint gun' type attachments may be a decent idea. I'm happy overall with this paint, it did what I wanted it to do and the color is exactly what I wanted. (In my picture the 'grit' in the dimples is intentional and has nothing to do with the Seymour paint)

Great coverage, high solids. Warm can to 80 F for best results

I've used MRO flat black and yellow paints and I've been impressed so far. The paint coverage is excellent. After 2-3 coats you have a good looking and durable finish. It does take a surprisingly long time to cure, however. It dries to the touch in a couple of hours, but the finish is still pretty soft and will scratch easily for a day or more. I would err on the side of giving it a weak to cure before putting it through any hard use. I attempted to bake cure in a dehydrator (sub 200 degree F temperature), but that results in wrinkles in the finish, so I do not recommend that. I swear that the yellow has a hint of banana smell Overall, the paint works well.

Paint itself seems to be fine, but the color is way off, like not even close to the cap color. I get that the cap color is not going to be perfect, but this was listed as light gray and it's almost white.

Good quality. You can polish this paint so it's shiny and reflective like a mirror.