Crank Brothers Stamp 2 Pedals

Edit to add, one pedal seized. Seal failed, water got in, rusted internals. Came apart ok although there’s no line of site from the end to get a torx allen style key in, had to use torx bit and an 8(?) mm spanner but as you undo the screw it winds out onto the body so you can’t fully remove the screw with the bit all the way, so had to use pliers with a rag on the jaws 😄 see how the warranty works out now thenMy size 12s always mean I have to ride a bit pigeon toed or my heals catch the cranks. Not with these in large. Nice natural potion for the feat. Big platform. Shallow depth. Loads of grip … but careful you don’t catch the grub screw studs with they are sharp. Maybe they will wear in but if you pedal strike the ground that could break a grub screw and give a lethal edge maybeThey did not tighten fully home in the crank arms tough which is odd. Must check that

Love these pedals, have a couple of sets on different bikes. Best price I found was here.

2m 30 seconds to fit, about 5 mins to adjust the spikes to my shoes. Solid, comfortable. Fitted these to my Boardman 8.9 which has rubbish pedals. Huge difference.

The bearings haven’t even lasted 170km and already noisy, looking for a full refund ASAP!! Total waste of money, had a set of hope pedals on my other bike for 6 years and still faultless!!!

I previously used Stamp 1s as my go to and when I switched to Stamp 2, I just cant go back. Trying to go my up all the way to the 11s. Highly recommended!

Excelente producto y agarre y facilidad de instalacion y presentacion la marca lo dice todo

Muy buenos estoy en la talla que podría tener los chicos o los grandes, me fuí por lo grandes, para la otra bici voy a comprar los chicos para probar las dos tallas, muy recomendables.

The pedals seem very solid. One didn’t spin quite as freely as the other so I pull it apart. Lots of grease inside and it looked perfect. Installed them on the fat bike and so far so good. I will up date in a month or so. I tightened the Allan screws on the pedals as some were, I wouldn’t say loose, just not as snug as the others. Blue lock tight on all the studs.So after 6 days of riding the left peddle started to squeak, especially when peddling in corners. I pulled the pedal off the axel and put more grease in it. So far so good. I wish I would have noted which spun loose when I installed them.

Not much bigger than the stock gt pedal. And I don't like the fact that can't use a 15mm to tighten it... I can only use a Allen key.... because I have lost pedals before and its threds are short it doesn't go all the way through the arm...ill keep you posted if it falls off after some jumps