Chery Genuine Gasoline Engine SQR372 812CC for John Deere 825i 835i Kawasaki Mule Pro FX FXT FXR Joyner Trooper Textron Prowler Pro Oreion Reeper Discovery UTV800 Tinger Track C500 S500 S380 TR5 V800

This is the second one of these engines I have purchased, I ordered them from Amazon not the supplier themselves just thought it would be safer that way. Both engines came packaged very well in wooden crates. Had the driver stay until I opened the crate to be sure no visual problems. The first engine was purchased 3 years ago for a 2015 Kawasaki Mule Pro , fit with no problems and is still running flawlessly with over 250 hours on it. The second was just purchased for a 2019 Kawasaki Mule pro , just drove it today for the first time and couldn’t be more pleased. Don’t be afraid of theses engines they are exactly the same engine as when you bought your mule. Only thing different is the location of the oil plug it’s a little off so you may have to trim your skid plate. And the oil pan is a little deeper than the one that was on it.

Shipped quickly ( 1st order lost by UPS) Arrived intact. Install was Kawasaki Pro-fxt and it fit fine. ( it has an extra " vent" barb on the cam cover and the plastic spark plug cover wouldn't work in my application so I used my original) All in all a good value and I would buy again.

Have about 15 hours on it. Runs great. For good not a big deal to swap. Started right up. ‘13 gator 825i. Thought it was a knock off(seeing how Deere wanted over 5 grand) but after looking things over I’m not so sure it is.

Installed in my 2018 mule pro fxt and worked perfectly!

Engine installed at Dealership and found to be defective. Now Amazon responded that it is non -refundable.!! I will be attaching a report from the Kawasaki dealer regarding the confirmation that this is defective. It looks like I am not the only one!! Also I am now out $1800 in labor cost to have the defective engine installed!!

Runs like a top. Not a single problem with 10 hours run time. Oil pan is deeper than gator 825 oem pan. Will need to space skid plate or re use oem pan. Will need thermostat gasket, tube of silicone for oil pan and a 2 bolt exhaust flange gasket for swap.

The oil pan on the new engine was deeper than on my old engine so I swapped them. Otherwise the engine was a perfect fit.

Box took a bit of beating on shipping but the engine was fine. Oil filter was crushed but that was only issue. Came with exhaust and intake gaskets. The Valve cover has a extra vent but i just plugged it and when I check the valves ill put the original one back on. Oem Chery engine. Fit perfect in the 2015 mule pro fxt. I have 10 hours on the engine. Its been great. Update 10/31/23 You will more than likely need to swap the oil pans. I went to install skid plate and the oil pan hangs lower than the OEM I will have to swap them at some point