GIGABYTE B550M DS3H (AM4 AMD/B550/Micro ATX/Dual M.2/SATA 6Gb/s/USB 3.2 Gen 1/PCIe 4.0/HMDI/DVI/DDR4/Motherboard)

After fidgeting with three different ASUS boards for an AMD 5600X I got for a build quite some time ago, I was about ready to throw it away. I bought this as a last resort to see if I could get the CPU to work . After using a UD3 with my i7-970 some years ago and it's still plugging away, I figured it was my best shot. It worked flawlessly upon install. Gigabyte's appstore prompts to install upon booting Windows for the first time and just needs a .Net 4.5 update to start automatically installing drivers, in the correct order. The board even revived a stick of Ripjaws V G.Skill RAM that had failed on the ASUS boards. I'm probably going to recommend Gigabyte from now on and to avoid ASUS. I don't know how three different boards could have the same CPU and RAM issues. Whatever Gigabyte does allows these fidgety components to work right out of the box. This board was inexpensive, has a nice clean CMOS UI, and installed quickly. 5/5 recommend to anyone looking to build with a compatible Ryzen CPU.

I put the B550M Motherboard in a Fractal Design G-Mini case. Fits perfect. I also put a Noctura fan 1500: https://www.amazon.com/dp/B00KF7O58G/ref=cfb_at_prodpg which I got on Amazon at the top of the case. I have a Ryzen 5700G with 32 gig Corsair LPX Vengeance 3200, Gigabyte B550M DS3H micro board and a EVGA 750 GA modular power supply. The case has several areas to run your cords through to the back. Many ways. Had a place in the back to put a ssd but I wanted to use the front hard drive holder which I put a crucial SSD (acquired from Amazon too). It does have two spots for a dvd drive too. I use one. I would but this again if I had the need. Hope this helps. Oh and I don't overclock and with all the fans in the case the cpu runs at 34c in a 74F room. The motherboard has more usb ports than I thought and has DVI, HDMI and Displayport. I was hoping to use an adapter for the DVI but you CANNOT do so. I needed a vga available just in case the person I was building it for didn't have that on their monitor. I did not see that noted in the description so keep that in mind. The Displayport and HDMI do not have that issue. The motherboard is F1 bios which accommodated my 5700G with no update. I installed Windows 10 and then upgraded to 11 with no issue. No problems with the motherboard at all. No cons.

Bought this for a first time build. Works great! Only issue I had with it was with the chip versions. This board had had a lot of revisions, and BIOS updates are a little tricky. It is not apparent on the box or in the manual what version you are sent, you have to physically check the board. I initially received a old version, then returned it and received the most recent one, so there is still older stock out there. Make sure you take care flashing the BIOS if you get an older board. It is tricky an not clear on the website, and flashing the BIOS can brick a board if done incorrectly.

Its a great b550 MB for this price since it also includes addressable rgb pins (ARGB 5V). Only down side is the gigabyte software for rgb (RGB fusion) is literally one of the worst software ever, you can ask any gigabyte mb user and they will tell you the same. If you want to have full RGB sync of keyboard and mouse and all fans and led strips etc... using your motherboard, this is probably not the best one to buy, ASUS's software is phenomenal. One alternative is getting rgb fans that have their own controller and dont plug into the mb. Long story short, amazing MB for its price but horrible for RGB.

Upgraded to the B550 everything was looking cherry, dual nvme's slots, 2 pci slots, 4 dimm slots, for an micro ATX board it was i think half and inch longer than my old micro, but it fit nicely. Now the problem is, I have a B I G ass gigabyte rtx 3080. Thing would not sit on the bottom slot due to the F A T ass card touching the bottom COM pin connector, if I moved it to the top slot then it clamps on the fan cable thats above the slot then the end of the card touches the SATA connectors thus the damn GPU not sitting flush and straight. Now my solution was a riser cable BUT doing that makes the card be flush with the glass panel, the fans are like 1/16th from the glass. The solution I came up with was setting it vertically and keeping the side panel open. Not sure if I'll buy the mesh or just get a bigger case. So Beware if u dudes thats my only con with this board. Oddly enough with my old mobo the damn card fit nicely with no problems, albeit it was and old board the asrock A320m. Edit. I got a new case and somehow got it to sit nicely, just had to get some sata cable that wasn't bulky, now it sits flush.

I installed the board but the A2 and B2 of the RAM did not work for me. I have tried several brands and it does not work, I tried another processor and it does not turn on, only the A1 and B1 work, I think the board was defective. Amazon support a 7 or a 10, I contacted them and super happy. They are a luxury, nothing to say, they supported me in everything, they will even make the change without problems, I adore them. Install the new plate and it worked, it was the previous one that failed. Now if the 4 banks of ram and dual chanel work.

Good all around board with most common B550 features. The Good 4 ram slots, easy out of the box recognition of my evo 960 M.2, QFLash Plus you can buy any Ryzen in the boards support list and flash bios support for the processor with absolutely nothing installed on it without buying an older supported CPU. Ample clearance on the board for aftermarket air coolers, Gigabyte reliability, my last board was also an ultra durable that ran for years with my now retired 1090T. No Board RGB, Yes you can use RGB fans etc, But if you want to build something that out of the box doesn't light up your room like an Xmas tree this is a good option. Good basic board for a smaller MATX gaming box.

I purchased this GIGABYTE B550M MB for my recent overhaul/upgrade of my rig. It's a small ATX but packs a punch with features. This MB's features worked out very well with my new configurations I had planned. The M.2 connectors was something new for me so, I just had to grab a 1TB NVMe to add to my upgrade package. I have owned several Gigabyte MBs prior that were great so, I had no hesitation when it came to purchasing this one. This MB is handling my EVGA 750 BQ Power supply, AMD Ryzen 5500, 64GB DDR4 Corsair memory, and 8GB Radeon RX 6650XT with no issues at all.

Gostei bastante da placa bem completa por um preço acessível. Tive só um problema que um dos drivers mais atualizados não estava conseguindo trazer o RGB Fusion (controlador de RGB da Gigabyte) do site por causa de um link offline, mas depois de uma nova versão (um mês depois) o pessoal corrigiu isso. Recomendo!

It was my first time building my own gaming PC and I'm so happy i got this. Everything was easy to install and very straight forward. The price was also decent for the amazing quality. I highly recommend this board to anyone looking to building their own PC.

Generous amount of SATA ports and good features for the price. Only one minor complaint: the USB3 socket is at the bottom of the board, right below the 2nd PCI-E slot, so the USB3 cable is right under the GPU fan.

على سعرها حلوه👍

Ben bunu kardeşime aldım ve bence Asus b550 var. Bence Gigabyte'tın Asus'dan bir tık daha iyi olduğunu düşünüyorum. Gerek bios arayüzünün türkçe olması gerek sadeliği bence çok hoş. Bu anakartta çift m2 slotu olması zaten bugünün şartlarında enzem durumlarındandı ve fazlasıyla yetiyorda. Tavsiye ediyorum herkese