Hromee 1/4 Inch Air Compressor Filter Regulator Combo, Water Oil Separator with Pressure Gauge, Manual Drain, Ball Valve and Bracket AW2000-02

Great product, good price, works good. Like that it is pretty universal, used on my plasma cutter and have no complaints.

Helps with airbrushing.

It works and was cheap. Quality is ok

Good kit with quality parts. It's a basic part but comes with everything needed at a good price

Installed this on a Kobold 4 gal that had a bad regulator. Of course I had to replace all of the 1/4" pipe since the stock is integrated, but I've found that the airflow is more consistent than the stock. This is mainly used for airbrushing so consistent air pressure is a big help.

I bought the regulator for use with my air brush. I paint model railroad cars. In the initial test, I connected it to my air compressor which had 80 PSI. The regulator dropped the pressure down to 25 to 30 PSI very nicely. The regulator uses standard 1/4 inch brass or steel fittings. I got mine at Lowes. It has a very sturdy aluminum body. The connectors turned in very smooth. Just be careful to use Teflon tape and don't over tighten.

Exelente equipo

If you are looking for improved performance for your compressor such as higher flow, forget it. The ID is restricted to low air flow on the shutoff valve and regulator. I need high flow air to drive a 1/2" impact. This regulator set up is only a restriction. Recommend 1/2" regulator with reducers.