All-Fit Automotive Rim Trim – Durable DIY Car Exterior Accessories for Curb Rash Protection – Fits Up to Four 24" Wheels – Made in USA – Flexible, Durable Wheel Rim Protector (3/8″ Width - White)

7/17/24 UPDATE My review has changed to 5 star. As it turned out, I did not initially, correctly install the product. The key is to make sure the wide portion of the trim is securely applied to the flat part of your rim. At first, I incorrectly pressed the edge into the space between tire and trim, instead of applying the trim to the flat part of the rim. Great product! Looks great on my wife's Audi Q5! 6/28/24 UPDATE I contacted the vendor directly; they responded immediately and were very helpful. We reviewed my installation technique and it appears the problem may be my installation. They have shipped me a complete new kit - so Customer Service is 5-STAR. I'll update my review after my do-over. Prior Review We really liked the look of the trim after installation. I was extremely meticulous and careful installing the Rim Trim. I waited until I knew I would not be rushed and had 3 days to let the installation adhesive set up before driving. Now, 3 out of 4 are coming loose. Now what do I do? I'm beyond Amazon's Return Window on this product!

I had some curve damage on my rims, so was looking for a temporary alternative to spending $1000 extra to fix atm. Product is great. A bit of a learning curve. If you are a perfectionist like me if the ends at the end don't meet up perfect......nightmares....lol....so....make sure you over cut about a cm when reaching the other end. Installation was a 20 min. for 4 tires 19inch. Plenty of material so don't be afraid to over cut. Maybe for 22 in maybe different. The directions are clear and almost anyone can do it. The little transparent plastic "unions" u put at both ends at the end don't really do much and they are more a nuisance than helping. They really don't stick to well and if you bought the black trim like me any over handling them can show fingerprints or spots of dirt. I still reluctantly left them on but don't think they will last too long. As for life of the trim....seems the double 3m tape is very strong but just installed them on 7/13. I'll do another review in a month with an update. Overall looks good and covered the damage until rims get fixed. Even after fixing the rims will get another one because I can see how they can protect a valuable investment. *******Update: unfortunately just like the other reviews mentioned, it not only flew off but before it did that, it stayed half way on and before I could stop the car it damaged my quarter panel and tool out my driver's side signal light. I will provide a photo ASAP. If they would provide a cap like other products to unite the ends I'm sure this would not happen. It really is too bad because they did look good.

The trim protects the wheels very well and looks great, you can't even really tell its on there once they're installed. I've had it installed for a few months now and it is still holding securely. I am super OCD and worried about curb rash - I can't stand it. I will replace or repair a wheel over even just a small bit of rash!! (I know, sounds pretty bad). On top of that, not sure if you can tell from the side photos but my wheels have a lip around the perimeter that sticks out from the tire, so it makes it even easier to damage. This trim fits over that lip and protects it perfectly! The trim will also hide damage very well too. Before getting this trim I already had a small section of damage and instead of buying a new wheel, I sanded it and put the trim over it. It covered the area perfectly adhered very securely. Saved me a few hundred dollars! The only minor cons: 1 - The clear seam stickers aren't the best. They should be the same color as the trim. If you cut the edge cleanly and fit the seams tight it looks way better than using the clear stickers. (Leave an extra 1/4" on your first cut and then adjust as needed) 2 - Yhe trim creates a little pocket that will trap dirt and makes it slightly more difficult to clean. In the pics You can see it near the valve stem. It's easy to clean it out, it just takes more effort. Other than that this trim has been excellent. It doesn't take away from the looks of the wheels at all and protects them great. You can also use it to hide prior damage. Finally, the customer service is amazing! I did have to replace one wheel and I contacted them about selling me a small section just for that one wheel. They responded immediately and took care of me with a complimentary piece! Highly recommend!

I bought this item 3 times at different times and for different vehicles. First set last about a year and a half. One side got pretty damage while protecting rim and I had to remove the rest and tried another color. Size is enough to cover all 4 rims and is very easy to apply. The only downside is the residue left when removing it, it's very messy and stubborn. I think is caused by the adhesive promoter not the adhesive itself. I have installed the other ones without using the adhesive promoter and so far still holding. I'll update my review in the future about this particular issue if necessary, but overall looks and works great!

Wow! Having used their universal lip on another vehicle, I had very high expectations. This kit comes as expected with their “goodie bag” including a free lanyard and all necessary prepping wipes. 3M tape on a firm trim that I’m confident will protect my wheels and did a great job hiding the slight curb rash I had. I’m very impressed with the quality, all-in-one kit. It’s also made in USA! I will say, this installation is all about prep and does take some time. It’s absolutely necessary to clean your wheels thoroughly with much more than those little alcohol wipes they include. There was a very easy to follow video link within the instructions and I followed the video closely. This took time. If you don’t prep correctly, dirt on your wheels will not be a friend to the 3M tape. I took my time and cleaned thoroughly and then re-cleaned again. The trim is bonded very strong to the wheel. I have tested these at highway speeds since installing with no issues. Pros: Affordable, ready to install out of the box, quality materials, don’t have to remove the wheels or tires, made in USA. Cons: Prep and Trim takes time to install, your own additional cleaning products (rubbing alcohol) required. All in all, awesome addition to my Vette! Very happy with my purchase. Thank you All-Fit!

I follow directions real good, did so with the install of these rim protectors, on brand new rims. Not even a week being mounted and the adhesive failed on one rim. It was jarring to hear the whipping of the plastic at 60 mph, I had no idea what was… couldn’t be the new rim protector! Alas, it was. Never fear, not long after I was again acting as roadside weed management when the second lost adhesion. Flapping and banging the side of my car whilst also trimming roadside weeds. I was now frustrated, one tire I could reapply, I had spare material, but two wheels exceeded the spare. Now only one side of the car had the protective plastic, until a few days later when I was reduced to one. I gave up and pulled the last one off, this was a vanity purchase to begin with, now I looked ridiculous. Bottom line, your kids bike may last longer but the garbage double sided tape can’t handle vehicle speeds. I wouldn’t buy it again. Looks nice on install but for the price my ego should have been fed for longer than 10 days. Pitiful junk.

Ok I put these on a couple weeks ago in ideal weather conditions. Used the wipes as indicated followed the directions carefully. Since the original install we had serious weather several ice storms, a bunch of rain and about 4 massive snowstorms. Put the the rim trim to a real test. Ran it at high speeds on the highway and all was well until today. Finally lost one of the trims under normal weather conditions on the high way the stripped just flew right off the wheel and banged up the passenger side of the vehicle. Basically just a few rubber scuffs easily removed but didn't hold as well as I was hoping. Side roads and lower speeds (under 65mph) you may be ok. I had enough left over from the original install to re-cover the one wheel so I didn't have to gut all the rims of the trim. I did check all the tires to make sure the trim was still adhered to the rim properly most of them were in good shape with a few spots with a little lift off the rim but we pressed them back down. Will retest but 3 of the 4 tires held up so far only lost on trim piece off of one tire. If they all hold up and last I would give this a solid 4 but right now as a result of the recent incident I cant in good faith give it a 4 or 5. The trim should have adhesive on the top and side lip to be more effective not just on the top of the rim side to be more effective especially with the pretreatment adhesive wipes.

Had been looking for a rim edge protector for oversized rims (23”) for a long time and had bought and returned 3 separate recommended options that all did not fit or looked cheap, this solution looks amazing, fit perfectly and was easy to install! Home Run!!

Se ve muy bien en el carro , funciona bien , pero es la segunda vez q compro algo de esta marca y de otras también y en este caso salieron volando cuando llegue a 120kmh la vez pasada fue hasta 160kmh. No duran si sales en carretera . Si sales a carretera o llegas a velocidades altas en tu coche no lo compres es mal producto pero si solo te la pasas a 40kmh en tu tsuru está genial

not sure why this product isn't get a 5 star review. Been waiting to write a review to make sure that the rim protection hasn't fallen off the car. So, after a month of having this, I can easily say that this was a great purchase! Installed these on my 19" satin black Tesla wheels, and haven't had any issues. If the wheels are spotless clean and you follow the steps, it'll adhere very well to the rim. The only negative comment that I can think of is the clear vinyl joint piece. Would be nice if it was the same color as the protector. Otherwise. Great product!

This is my second brand I'm trying out and it's almost perfect, only thing missing is proper caps and special gell super glue for the ends to keep them from unraveling, I had left over from the previous brand I was used a lot, Rim Blades, and was able to finish off a perfect job with that special glue and left over rim protector, which I had more than enough, even enough for a whole spare. So I would say just to improve the finish touch rather than a simple clear sticker for a more secured lock and hold. The old brand I was using, which are ready good too but nothing in comparison to the quality of this one All Fit, it feels way better, stronger, bigger and general higher quality with more than you need material to do the job, including a good amount of cleaning and primer wipes. Overall really good and highly recommendm

Exactly as advertised

Very bad quality. I trusted the 3M and they didn't last for 3days and got out from the rims .