LH-X54B Square Metal Lens Hood with 49mm Adapter Ring for Fujifilm X100VI Fuji X100V Camera Black

Love it! Makes my X100VI look more retro and “Leica-like”. The silver finish is, I would say, maybe 90% similar to the camera silver. The build quality feels nice, doesn’t feel cheap at all. The crisscross section of the adapter is smoother compared to the focus ring so it’s easy to distinguish between the 2. Now, for the most common complaint about the hood, I managed to get it as tight as possible without over tightening it while also maintaining the straightness of the hood. The red rubber o-ring helps in maintaining that hold on the hood really well. Although, the original Fuji lens cap fits, it’s a little weird when it comes to evening out the lens cap on the hood. Overall, I would say 9.5/10!

Fujifilm doesn't include a lens hood with the X100V and for the money, they really should in my opinion but here we are. The search for the best lens hood for the X100 series and this definitely is the one...well for me anyways. I bought the camera to be a EDC/Travel/Documentary/Backup camera to my XT4 and I didn't want to compromise the size of the camera. I wanted to keep it compact as I could. This square hood by Hoage doesn't add to the bulk nor weight of the camera. It doesn't affect the OVF very much and it does a wonderful job at blocking stray light and providing more contrast as well as giving you something extra to grab onto. Installation was tricky to say the least. I say to sit down, grab a coffee watching your favorite show and keep playing with it until you get the alignment right. I took me a good 15-20 minutes, the gasket makes it hard to turn be I ensure, it will keep turning. Just do 1/4 turns at a time, it will get very tight but this is what you want so it doesn't come loose. The quality is great, no complaints. When I took the hood out of the box, I accidently dropped it on the floor and it made a loud DING! and bounced back up with me catching it. It didn't leave a single mark on the hood, didn't dent it or anything but it left the mark on the floor! I'd say its built pretty well! As for the filter I am using, as well all know the X100V is weather sealed but requires a filter to protect the front element as it extends externally when focusing. I am using a B+W 66-1066114 (Amazon:B004OVE16U) and its fits PERFECT! Good quality too, doesn't affect images...in fact it might help them. This is a good alternative to the expensive Fujifilm kit or the fancy overpriced Sweden alternative. I HIGHLY recommend this lens hood!

I was a little hesitant to order this lens hood based on all the reviews saying that it was misaligned and very difficult to put on, but it truly could not have been easier and took all of a few seconds. Even before writing this review, I unscrewed it and put back on my X100V to make sure it aligns exactly as it should, and it does. It’s easy to put on and take off, which I have to do often when I change out lens filters. I saw some reviews saying they had to tighten it to the point where they thought something might break; I didn’t find that to be the case at all, although yes, you do have to tighten it—but not excessively. The original lens cap for my X100V also fits perfectly on top of it. This lens hood is perfect. It’s a little pricey, but it’s beautiful, and it’s the lens hood Fuji should’ve made and included with the camera. If you’re worried, don’t be; just watch the video on the Amazon product page for this lens hood, and do exactly what the person does when putting the hood on the camera, aligning it they way they do. Worked for me.

Works well, looks good, and rubber gasket holds it on tight. OEM cap does not fit well, so it would be nice if the HOAGE cap was bundled with it.

I recently picked up this lens hood for my Fujifilm X100V, even though I didn’t necessarily need it, and I have to say, it looks incredibly sleek on the camera. The metal construction feels like great quality, adding a touch of sophistication and durability to my setup. I did encounter a minor challenge when aligning it correctly. Initially, I had to unscrew and screw it back on a couple of times before realizing I needed to keep turning it until it locked into place properly. Once I figured that out, it wasn’t an issue anymore, but it did take a bit of patience at first. One thing to note is that if someone plans to frequently remove and reattach the hood, the rubber ring might wear out quickly. This could be a concern for those who like to switch between using the hood and not. Despite this, the overall build and aesthetic appeal make it a worthwhile addition to my camera.

I bought this product to protect the lens on my Fujifilm X100VI. At first glance it looks okay, but I ran into a few issues: 1. The camera’s front ring isn’t easy to remove, yet the manual doesn’t explain clearly how to remove it.(Attach the original lens cap fully, apply steady pressure, and slowly turn it counterclockwise.) 2. After installing this, I can attach the original hood, but the build quality isn’t great. It doesn’t fit cleanly and ends up looking slightly misaligned—like it’s not fully seated. 3. The red rubber ring between the adapter ring and the hood makes my camera look unexpectedly cheap. Overall, it works, but the design and finishing details could be much better.

Excellent quality. Heavy duty. Fits great on my Fuji X100VI. Compact but still does the job, eliminating unintended haze and glare. This is a must have.

Good. Perfect fit for my Fujifilm x100vi camera. I was able to use this with my existing lens cap so that's a plus. Looks good. The colour goes well with the camera body. I was also able to attach additional filters with this lens hood.

Good, just wish there was lens cap

وصلت بدون الادابتر

Good product and looks super nice on my x100vi

Fits perfectly on my x100v. If there is one comment I would add is that the genuine Fuji lens cap doesn’t fit well on it as advertised. It will go on but it’s not square and comes off easily