Nilight LED Pods 2Pcs 3 Inch 42W LED Cubes Spot Flood Combo Square Driving Fog Off Road Work Lights for Trucks Pickup Golf Cart SUV ATV UTV 4x4 Van Camper

Once again I should be a Nilight spokesperson. I love nilight and only buy their products. These are very bright and attractive to look at. I chose these because on the skidloader I was installing them on, the other brackets wouldn't have worked and did give alot of adjustment. These are easily adjusted. The only down fall was when bolting the bracket on the nuts will not stay in 1 place and you have to help it get started. There is limited space for the nut so I used a oring pick and help the nut stay in place till I got it started. Very happy with these and how they function. I have used them while pushing snow in below 0 temp and they seem to be water proof and dont condensate after warming up. 100% recommend.

I bought these on a whim to replace ones I already had on my 2007 KLR650. They mounted to the fairing bolt the same way the original ones did but I had to replace the screw with a actual bolt head because you can't access it straight on like the factory ones unless you're as dexterous as it would take to put them out on then attach the bracket to the light (You could, but it would be frustrating. These lights are a solid chunk of aluminum with what looks like a 0.25 in a piece of acrylic or lexan for a lens. The tiny wires have super thick installation which should keep them from getting rubbed through for very long time but you only get like 6 inches of wire from light to tip. They go through a really nice grommet and they look epoxyed on the inside so the wire pulling out or leaking shouldn't be a problem either. On that note, the black outer casing is pretty stiff and feels like nylon or something very wear resistant but the inner wires are really nice silicone achieved wire that feels like it has been tinned already (fantastic for solder connections) These things are really well made but a bit finicky to assemble. They go together with a nut, bolt, and a few washers but You only need the Allen key to put them together because the bolt is held captive by one of the fins and the housing actually has a recessed area to hold the washer and lock washer (One of my lock washers was too big to go in the hole and I had to cut it down and squish it a little to get it in there so QA might not be great) It does also come with the Allen key you will need. As far as brightness goes, I would say they're about 75% as bright as the JNS engineering sealed beam replacement LED. I run on the KLR which doesn't sound amazing But I'm still saying they're probably 10 times as bright as the factory still being you would get on a jeep or Miata. Overall I would say they are a fantastic steal and they were way cheaper and better in practically every way than the ones they are replacing Plus all said and done. It probably took 10 minutes to install them on my '07 KLR 650

I installed these Nilight 3-inch 42W LED pods as ditch lights on my Ford Bronco, and wow — what a difference! They throw a wide, bright beam right where I need it, lighting up the sides of the trail so I can spot rocks, branches, or sneaky dips before I get too close. These little lights punch way above their weight. The combo spot and flood beam setup means I get sharp distance visibility plus enough side light to keep the trail edges in clear view. Night runs on tricky trails feel way safer now. They’re solidly built and have handled everything from mud splashes to heavy rain without skipping a beat. Plus, they fit nicely on my Bronco without looking bulky or out of place. Setup was straightforward — even for someone who’s not a wiring expert like me. If you’re running a Bronco or any off-roader and want ditch lights that won’t quit, these Nilight pods are a smart pick.

Love these lights, Super bright! But the bracket could be a little more substantial...

Great value and really bright

These are fantastic lights. Super simple to install and bright. I saw someone reducing the number of stars on thier review because of the brackets. The brackets are pure genius and let me tell you why; They have made perfect notches in the fins to hold the nut in place. I literally used a pair of scissors to hold on to the lip of the nut to drop it in place, once its in place the bolt screws right in, no need to try and get a wrench in there to hold it in place... it's brilliant. As for how these compare to a Rigid Industries lights I may never know, I am not about to drop over $200 for a set of those, however $20 for these is really a win in my book. I had a set of these on my old wrangler and never had an issue so I decided to go with them again.

I absolutely love these cube lights! They’re bright, low priced, high quality and durable! They make my Jeep look more stylish

Inexpensive and work real well close in with broad beam

Quality wise the product is good. But to get the delivery of the product was a nightmare. I had to call the customer care more than 15 times to get the delivery done.

El material se ve resistente y dan buena iluminación esperemos con el uso que tal responden

Satisfait

super for backup lights reverse. Using in desert

Luminucidad execelente. Fácil instalación... Para mejorar la instalación se recomienda comprar por aparte tuercas y rondana ya que las que trae son muy delgadas...