🚴♂️ Elevate Your Experience - Ride Higher, Ride Smarter!
The Rox Pro-Offset Block Riser (Spc) 1-1/4 is a high-quality handlebar riser designed to elevate your bike's handlebars by 1 inch, enhancing comfort and control. With its universal fit and easy installation, it’s perfect for a variety of motorcycle models, making it a must-have for any serious rider.
Brand | Rox Speed FX |
Product Dimensions | 12"L x 1"W |
Number of Pieces | 1 |
Special Feature | Easy to Install |
Included Components | Screw |
Item Weight | 0.7 Pounds |
Package Type | Standard Packaging |
Unit Count | 1.00 count |
Manufacturer | Rox Speed FX |
Model | Pro-Offset Block Riser - 1in.-1-1/4in. R |
Item Weight | 11.2 ounces |
Item model number | 0602-0654 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | 0602-0654 |
OEM Part Number | 202540 |
Special Features | Easy to Install |
P**N
Great risers, the offset really helped with 1 piece of the puzzle for a comfortable ride
Installed on a 2012 RMZ450. I'm 6'2" with long arms and needed an offset riser. I was running a standard 30mm riser with my factory 1 piece top clamp with a stock bend handlebar. I bought these with intentions of removing my non offset 30mm risers and just using the bottom offsets attached to my factory lower bar mounts and then reuse my factory 1 piece top clamp. This riser is machined and finished nicely but the top clamp holes are not the same distance apart as my factory single piece top clamp. You do not want to install these risers on a dirt bike without a 1 piece top clamp or you will have bent and or twisted lower mount bolts where it attaches to your top triple clamp after a crash. I ended up machining my factory 1 piece top clamp ".020 elongated closer to the bar on each hole " to allow me to mount it with these risers. I never intended nor wanted to run them with the supplied dual piece top clamps and I'm glad it worked out with minimal fitment to my factory top clamp. I also added Fastway foot pegs installed in the lower position and a Turner Performance Products RM High/Carmichael bend handlebar to max out my cable length and the bike is so much easier to ride and less arm pump. The offset did not effect the bikes cornering ability in any negative ways in fact its the best its ever been and I'm not sure if its the geometry or just the fact that I'm that much more confident in this new rider position.
C**O
Good quality.
Top notch quality. Easy to scratch thought but they are aluminum. Worked good on my wife's F650GS twin but I had to use a couple small washers to shim the rear bolt where it ataches to the existing lower clamps. The lowers on teh BMW are uneven from front to back. ADV Rider has more write ups on how these fit the GS twins.
A**R
Excellent handlebar risers. Highly recommend.
These Rox risers are very well made from solid aluminum (not the cheap and brittle cast aluminum like some other brands). I love their unique 1" rise and 1" pull-back design. You can also install them reversed so they only rise 1" but don't pull back. I installed these on a 2015 Triumph Bonneville SE in the 1" up and 1" back configuration and they fit perfectly without needing to do anything to my cables. These Rox risers really make a big difference on how I engage with the handlebars and make my ride much more comfortable. Highly recommend.
J**D
Great product for the money, and great service from the seller!
I installed these on a 2019 KTM 500 and the fit was perfect. Really good quality units with a nice finish. I was able to keep the same routing without having to extend cables. I am 6’5” and I had to really lean over when standing up. It is perfect now without being too high. I have had bar risers on other bikes that were too tall and it made hill climbs harder as it put me to far up and back.
J**D
Good to know if my handlebars are ever swapped out that these risers won't have to be!
These are an exact fit for my handlebars with the given inserts. They add a comfortable fit to your riding posture and reduce fatigue on a longer ride. Though these are not labeled as a form of vibration dampening, I feel like it has been reduced.
D**G
Very nice riser...
Super clean & nice riser. Worked perfect. I did make a spacer to increase the contact area for the inside (elongated) bolt hole. May not have been necessary but I'm using it on a trials bike that puts more stress on the steering than other bikes. So far looks good and works good AND the price was about 1/2 the cost of most...
R**S
Rox Risers fit DRZ400
These risers move the handlebars inline with forks, where they should be for bike you want to change directions on quickly. Fit with no cable modifications for me. I did need to add a couple aluminum washers in front of the speedometer to move it forward just a bit.
T**P
Good quality and offer slight rise and setback.
These risers add a slight rise and setback which it just what I needed. They are very good quality and easy to install. The only con was the packaging arrived open and one shim was missing. I was able to easily fabricate another.
E**D
Ideal para Suzuki Vstrom 650XT 2018
Excelente calidad, hecho 100% en USA cono lo indican observándose en sus acabados y materiales. Ideal para Suzuki Vstrom 650 XT 2018 ya que no requiere de cambiar ningún cable (frenos, acelerador, etc.). Mido 1,83mt y me dio la altura necesaria para estar de pie en Off Road y cómodo en carretera. 100% recomendable
Trustpilot
2 months ago
1 week ago