ODIER Bike Handlebar Extender 22cm 10cm Long Extension Mount for 31.8mm Handlebars 2 Clamps with Anti-Slip Pads

Purchased an ebike for the wife with LCD screen and cruiser style handlebars (RadCity Step-Thru). Very limited handlebar space for an extra headlight and cell phone holder (iPhone 6S Plus with Mophie wireless charging battery case). This extender is very easy to install in minutes with Allen wrench, you can adjust where to secure on handlebar, stable, looks/feels expensive, and looks like it suppose to be part of the bike.

UPDATE: I have to tighten this thing every day. I'll be returning it shortly.On top of that (and the false advertising in the product details - it came with one clamp, not two), it's incredibly disappointing to see (literally) dozens of similar products that actually appear to use identical mounts, just with different colors painted and different text printed on them. It's pretty obvious that the design of this product is mass produced under countless brands without any regard for quality or brand trust.----Just got this so I could mount my Cycliq headlight/camera on my e-bike in a centered and leveled location. Centered, yes. Leveled...maybe not. It feels like it wants to sag a bit under the weight, which while expected to some degree is still irritating.I also wasn't able to get it tight enough where it wouldn't rotate up and down, but it feels like it's probably secure enough.We'll see how it holds up.Oh, and these bullet points are lies, there's only one mount included, the 3.9 inch one.* 2 in 1: Our handlebar extender kit include 2 different size- 8.7inch and 3.9inch mount.* NOTE: Most of our competitor's products has only 18cm~20cm in lenght [sic], ODIER's has 22cm and 10cm mount in one pack. Our product is very firm once installed, it won't slip at all.

I wanted to mount two headlights at least 6 inches apart since I do a lot of nighttime riding. The curvature of my handlebars does not allow the lights to aim correctly at six inches apart. The extension mounted onto the handlebar without significant difficulty. They did not fit my very old narrow round handlebars, so I used electrical tape to add bulk to the handlebars and then mounted the extension onto the electrical tape. Very stable and looks good too. The lights no longer interfere with the brake cables, and they are separated six inches without the previously interfering curvature of my handlebars. Lots of room to add other stuff but I do not intend to do so. I am now ordering a second one for my other bike. I am choosing this one not for the extra short bar included but for the extra 2 cm length compared to most of the others. Solid aluminum by the way, not plastic. Suggestion to manufacturer: include the allen wrench in the package.Pleased with my first one, bought a second one for my second bike. This time the fit was perfect, modern handlebars and not 25 years old, no need for bulking the handlebars with electrical tape. Mounted in 5 minutes with no difficulty (if you have the correct allen wrench). Now dual headlights align correctly and room for other add-ins I do not intend to use.

First let me start off with this - The bar extender is a really well built product. Very strong and light weight. It mounts well to the handlebars, doesn’t slip, and transfers a minimum of vibration. BUT… the clearance between the bar extender and the handle bars is just barely enough room for my hands. When holding the handle bars in the middle, my knuckle will actually bump into the bar. I mounted this on a road bike (drop handle bar type). I have large hands but not anything out of the norm. If they had added another ¼” to mounting bracket length, this would have been a perfect product. The aluminum bar tube has cross-hatching that helps keep my phone mount and lights from sliding around. The long bar holds all of the attachments that I normally ride with, two lights, a phone case, and a speaker – with plenty of room to spare. I’m not giving it a five star rating because it does need just a little extra clearance in the mounting brackets

I added an extra star for the extra piece of pipe, eventhough i dont need it. You were trying, and could have possibly been satisfied if i could have mounted it. You dont advise the customer of the insullation/spacers they make just for that. None of the others were like that and i had no clue. Until i tried to install it. And looked at them 4 tiny strips of plastic that comes woth it. Like a everything you need in the kit. Then i got hurt at work & the return date passed while i was preoccupied with doctors & my job. So I'm just stuck with it i guess. Someday I'll figue out how to put it to use. Dale.B

The description promises a 22cm extender with two clamps and anti-slip pads. What actually shows up is a small 10cm bar with one clamp and no pads at all, which in practice means that the product will be too loose for most any set of handlebars. If what shows up actually matched the description (or the pictures from customers who received a totally different model years ago), that would be fine, but as is this fails completely at its purpose.

I am a tall person (5’11”) and I was trying to find a solution for the stroller handle bar - to make it more comfortable for me.I ended up using only the brackets of this product. I bought a wood bar that the length would work better for the purpose I wanted (same diameter as the metal bar).It’s not perfect, but is helping a lot! I can already feel my back getting better!

My bike has round handlebars and the clamps for this extender are an oblong shape. As a result, the handlebar extender doesn't stay put or level. It slips down from the weight of the water bottle and other things I put on the bar. Disappointed.

The description says you get two clamps and two different length extender bars, while the picture shows 1 clamp and 1 bar. The picture is correct.I was misled as I was focused on the product description as sometimes the same generic picture is used for several products.Needless to say, I was surprised and disappointed when the product arrived.