Skymore 86W LED Nail Lamp, Professional Nail Dryer with 4 Timer Setting, Portable Curing Lamp for Gel Nail Polish, Automatic Sensor & LCD Display, Manicure Pedicure Tools for Home Salon

This product was really strong and effective! It's great for anyone who wants to use it for their own nails or is starting a business. It's exactly as described and came with extra nail files and tools. I had it long enough to finally leave a review (bought maybe 1-2 years ago).

For those that want to know, this nail polish hardener works for nail resin as well as 3d printer resin. Works with anycubic, Phrozen, elegoo, siraya tech, and probably all others.I have a uv flashlight that is crazy bright, and resin drops run from it like it is a flaming torch. If I shine my flashlight into the alcohol wash, it boils and churns. I made two identical sized resin drops, hit one with the flashlight for 10 seconds, yielding 75% of the drop hardened, with just a little liquid in the center. The nailpolish hardener light set to 10 seconds was able to fully harden the resin, it was still slightly sticky, but no bubble of liquid in the drop. So without a more scientific test, I would say it is much more powerful that the high power 18650 UV flashlights.The only thing to understand is this has three output levels. If you start it on a 10/30/60 second cycle, it will run full power. If you run it using the 99 second timer, you get 30 seconds at low power, 20 seconds of medium power and 49 seconds of high power. I'm sure there is a reason for this, and it is probably covered in the manual I did not read because I was not curing nail polish.These LED's don't have a uv filter, so they output a lot of yellow light with the UV, but for curing resin you don't care about that, unfiltered led's will probably be brighter.So for people curing 3d prints, nail salon poolish hardener systems are great for resin utility.A favorite thing to do is take my glove covered hands drippoing in resin from cleaning a print, and put your gloved hands in the nail hardener, it will auto turn on, and cure the resin on your gloves. Set it on 30 and give each hand 7 seconds on each side before you take your gloves off, that way you can reuse the gloves many times, and they will not spread resin everywhere. you can take the bottom off the nail light, and set it on top of your alcohol tank, scan your workbench to harden stray resin drops and smears, and generally reduce the sticky part of the mess. Use a formica work surface, and the hardened resin will pop right off with your scraper.

At first, I was hesitant on purchasing this lamp but so glad I did. Its perfect and does what it's supposed to at an affordable price 😁 highly recommend!!! Oh and the color of the lamp is beautiful too😍🫶🏼

I just got this yesterday so I can't speak to the longevity, but even if it lasts a couple of months I'll feel I got my money's worth.This is my third nail lamp. I had given up on gel nail polish, but I like having my nails done, can't usually make it to the nail salon, and still owned a ton of gel polish.My first lamp came in a huge gel starter kit and was low wattage with not many lights inside. Sticky mess even after wiping with alcohol. The second lamp was very high wattage but also had very few bulbs and also burned my fingers. Sticky, painful mess.Took a chance on this lamp because the wattage is high enough to cure, low enough to not burn, and at its price point, had the most lights. That means there's light hitting every possible angle of my ridiculously petite, curved nail beds.Did my first successful gel mani as soon as I opened the box. Fully cured in 30 seconds per coat. Yes! Finally!

I just got this yesterday so I can't speak to the longevity, but even if it lasts a couple of months I'll feel I got my money's worth.This is my third nail lamp. I had given up on gel nail polish, but I like having my nails done, can't usually make it to the nail salon and still owned a ton of gel polish.My first lamp came in a huge gel starter kit and was low wattage with not many lights inside. Sticky mess even after wiping with alcohol. Second lamp was very high wattage but also had very few bulbs and also burned my fingers. Sticky, painful mess.Took a chance on this lamp because the wattage is high enough to cure, low enough to not burn, and at its price point, had the most lights. That means there's light hitting every possible angle of my ridiculously petite, curved nail beds.Did my first successful gel mani as soon as I opened the box. Fully cured in 30 seconds per coat. Yes! Finally!A word of advice to those new to gel:If you think your lamp isn't curing your polish, make sure you give your nails a wipe with 99% rubbing alcohol to remove the inhibition layer. Basically, any gel polish exposed to oxygen will feel sticky. Don't worry about this stickiness between layers because as soon as it's covered by another coat of polish and put under the lamp, it will fully harden. You only need to worry about wiping the top coat with alcohol.

It works great but the bottom plate likes to just fall off when moving it around, even when you are holding by the top of the dryer and not the bottom plate. That's my only issue with it. Considering super gluing the bottom to the top just to keep it from falling off but would make it more tricky to clean when needed.

I've had this lamp for a while now. I use it one a week and it works so well for everything. It is extremely high powered and cuts down cure time so much. I have used about every type of gel product in this lamp and it works on them all. It has timed buttons but is also auto-on as well making it super versatile for just about everything if you need a flash cure while putting on full covers. The bottom plate it removable too for cleaning and getting both hands in to holding onto tips. I love this thing, also it travels really well. I have put it in a carry on and it has survived remarkably well.

I have two driers I got in the past few months, and this is my favorite. The other works well too, but this one is just superior in every way-- clear large number count down, easy to use plug, clear buttons, fun bizarro design.

Je suis professionnelle des ongles. J'utilise les lampes pour polymériser les gels. Mais je regrette l'achat seulement parce que l'ouverture est tellement petite que les clientes accrochent leur ongles avant d'entrer dans la lampe. Et faut faire le pouce à part, car il ne polymérise pas correctement. Et de plus j'utilise 2 lampes une pour chaque main et le fil pour le brancher n'est même pas assez long pour l'autre côté de la table. Grrrrr peut être que la compagnie qui les fabriquent devrait faire les modifications nécessaires!Ne pas acheter si vous êtes professionnelles en ongles. Ca ne polymérise pas bien du tout

I really like this light. It is super easy to use with both a timer or a sensor option. The base comes off if you want it to, they suggest for your toes but I didn't need to take it off to fit my foot in. Lights are all around inside so curing is great even with your thumb too!

Looks adorable and perfect for my need- which is UV Resin curing. The cord is a little short. Well worth the price!

It’s an amazing uv light. Works really well good quality.

The media could not be loaded.  I was so excited for this lamp. It'd so pretty but the power cord is super short. I am a professional nail tech, I used this lamp for a week, then the problems started. The top gets super hot. Then it started randomly blinking like a strobe light when no ones hand was in it. I had high hops for this lamp, very disappointed.